Advantech IPPC-9120G User manual

IPPC-9120G

Rugged Industrial Panel PC with

Intel® Pentium® III or Celeron®

and 12.1" LCD Display

IPPC-9150G

Rugged Industrial Panel PC with

Intel® Pentium® III or Celeron®

and 15" LCD Display

Users Manual

IPPC-9120G/9150G Users Manual ii

This document is copyrighted 2001, by Advantech Co. Ltd. All rights are

reserved. Advantech Co., Ltd. reserves the right to alter the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech. Infor-

mation provided in this manual is intended to be accurate and reliable.

However, Advantech assumes no responsibility for use of this manual,

nor for any infringements upon the rights of third parties which may

result from such use. All brand and product names mentioned herein are

trademarks or registered trademarks of their respective holders.

Acknowledgments

ADAM is a trademark of Advantech Co., Ltd.

IBM and PC are trademarks of International Business Machines Corpora-

tion.

For more information on this and other Advantech products, please visit

our website at: http://www.advantech.com

For technical support and service, please visit our support website at:

http://www.advantech.com.tw/support/

Part No. 2003001100

1st Edition

October 2004

iii

FCC Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a residential environment. This

equipment generates, uses and can radiate radio frequency energy. If not

installed and used in accordance with this user's manual, it may cause

harmful interference to radio communications. Note that even when this

equipment is installed and used in accordance with this user's manual,

there is still no guarantee that interference will not occur. If this equip-

ment is believed to be causing harmful interference to radio or television

reception, this can be determined by turning the equipment on and off. If

interference is occurring, the user is encouraged to try to correct the inter-

ference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment to a power outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Warning! Any changes or modifications made to the

equipment which are not expressly approved by

the relevant standards authority could void your

authority to operate the equipment.

IPPC-9120G/9150G Users Manual iv

Packing List

Before setting up the system, check that the item is among those listed

below and is in good condition. If your Panel PC does not match any of

those below, please contact your dealer immediately.

The IPPC-9120G and IPPC-9150G Series of Industrial Panel PCs

includes the following models:

1. IPPC-9120G

Rugged industrial panel PC with Intel Pentium III or Celeron with 12.1”

TFT LCD Display

2. IPPC-9120G-R

IPPC-9120G with resistive type touchscreen

3. IPPC-9150G

Rugged industrial panel PC with Intel Pentium III or Celeron with 15”

TFT LCD Display

4. IPPC-9150G-R

IPPC-9150G with resistive type touchscreen

Item IPPC-9120G IPPC-9150G

Description Rugged Pentium® III/Celeron

Industrial Panel PC with LCD display

LCD type 12.1" TFT SVGA 15" TFT XGA

Display

resolution

800 x 600 1024 x 768

Motherboard PCM-9672

Network (LAN) 10/100Base-T

Power supply 100 W

Items in

accessory box

One utility CD-ROM

CPU fan with heat sink by two (two dif-

ferent types)

One Y-shaped adapter for PS/2 mouse

and PS/2 keyboard

Optional Devices

Touchscreen Resistive Resistive

Slim type

CDROM drive

24X slim type CD-ROM

One floppy disk with CD-ROM drive

IPPC-9120G/9150G Users Manual vi

Additional Information and Assistance

Step 1. Visit the Advantech web site at www.advantech.com where you

can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's

customer service center for technical support if you need addi-

tional assistance. Please have the following information ready

before you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version, application

software, etc.)

• A complete description of the problem

• The exact wording of any error messages

vii

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or let-

ting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according

to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE

THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR

ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE

EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT

TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED

BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUC-

TIONS.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advan-

tech disclaims all responsibility for the accuracy of any statements contained

herein.

IPPC-9120G/9150G Users Manual viii

W i c h t i g e S i c h e r h e i s h i n w e i s e

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor über-

hitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt wer-

den.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann.

Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädi-

gung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten

in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus-

lösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen

und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert

oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batte-

rie.Ersatz nur durch densellben order einem vom Hersteller empfohlene-

mahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des

Herstellers.

16. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf nicht fach-

männische Weise gewechselt wird. Verfangen Sie die Batterie nur gleicher

oder entsprechender Type, wie vom Hersteller empfohlen. Entsorgen Sie Bat-

terien nach Anweisung des Herstellers.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend

der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die

Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.

IPPC-9120G/9150G Users Manual x

This manual suits for next models

Table of contents

Other Advantech Touch Panel manuals

Advantech

Advantech PPC-3151-650AE Installation and operation manual

Advantech

Advantech Intel XScale PXA Touch Panel Computer TPC-66... User manual

Advantech

Advantech TPC-1260 User manual

Advantech

Advantech PPC-612 User manual

Advantech

Advantech IPPC-6172A Series User manual

Advantech

Advantech PPC-3100-RE9A Installation and operation manual

Advantech

Advantech PPC-L127T User manual

Advantech

Advantech PPC-3211SW User manual

Advantech

Advantech TPC-B610 User manual

Advantech

Advantech PPC-L158T User manual

Advantech

Advantech PPC-3120-RE9A Installation instructions

Advantech

Advantech POC-174 User manual

Advantech

Advantech TPC-1070 User manual

Advantech

Advantech TPC-1260H User manual

Advantech

Advantech PPC-S155T User manual

Advantech

Advantech PPC-112W Installation and operation manual

Advantech

Advantech UTC-307GP-ATB0E Installation and operation manual

Advantech

Advantech SPC-200 Series User manual

Advantech

Advantech PPC-318W Installation and operation manual

Advantech

Advantech TPC-1581WP User manual

Advantech

Advantech IPPC-4001 Series User manual

Advantech

Advantech PPC-L106T User manual

Advantech

Advantech PCM-3335 User manual

Advantech

Advantech PPC-123 User manual

Popular Touch Panel manuals by other brands

FlowLine

FlowLine Data loop quick start

ALPEX

ALPEX AEx-8 P Series user manual

Ltech

Ltech E5S manual

Harman

Harman AMX MODERO S MSD-701-L2 quick start guide

Acnodes

Acnodes PC 1150 installation guide

AIS

AIS IP10IA99 series user guide

IBASE Technology

IBASE Technology ASTUT-152-RE1S user manual

YASKAWA

YASKAWA TP 610C manual

B&R

B&R Power Panel C Series user manual

Beijer Electronics

Beijer Electronics X2 control Hardware and installation manual

AXIOMTEK

AXIOMTEK GOT321W-521 user manual

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Operation manual

Qomo

Qomo QIT1386 user manual

DFI

DFI KS104-CD user manual

AMX

AMX AXP-PPC Dimensional drawing

Sartorius

Sartorius X3 PR 5410 operating manual

AMX

AMX Modero X Series quick start guide

B&R Industries

B&R Industries MAPPC900-ENG user manual