Advantech PPC-S123 User manual

PPC-S123

UltraSlim™ Pentium® III

processor-based 12.1” panel PC

User’s Manual

This document is copyrighted 2001, by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd. reserves the right to alter the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech. Information provided in this manual is

intended to be accurate and reliable. However, Advantech assumes no

responsibility for use of this manual, nor for any infringements upon

the rights of third parties which may result from such use.

All brand and product names mentioned herein are trademarks or

registered trademarks of their respective holders.

Part No. 2008S12300

1st Edition Printed in Taiwan November 2001

FCC Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

environment. This equipment generates, uses and can radiate radio

frequency energy. If not installed and used in accordance with this

user's manual, it may cause harmful interference to radio communica-

tions. Note that even when this equipment is installed and used in

accordance with this user's manual, there is still no guarantee that

interference will not occur. If this equipment is believed to be causing

harmful interference to radio or television reception, this can be

determined by turning the equipment on and off. If interference is

occurring, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment to a power outlet on a circuit different from

that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Warning: Any changes or modifications made to the equipment

which are not expressly approved by the relevant

standards authority could void your authority to

operate the equipment.

Packing List

Before installing your panel PC, ensure that the following materials

have been received:

• PPC-S123 series panel PC

• User's manual

• Accessories for PPC-S123

- Y-shaped adapter for PS/2 mouse and keyboard

- Printer port adapter cable

- COM port adapter cables

- CPU push cover

- CPU push screw driver

- Warranty card

- Power cord: USA type

- AC/DC power adapter

- DC plug-in housing (female)

- External FDD flat cable

- External IDE flat cable

- Power cable for external FDD/HDD/CD-ROM

- "Drivers and Utilities" CD-ROM disc

- VESA-standard bracket for mounting

- Mounting kits and packet of screws

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Note: If you install an Intel

processor yourself, you must

install a heat sink above the CPU.This will avoid

heat damage to the CPU.

Additional Information and Assistance

1. Visit the Advantech websites at www.advantech.com or

www.advantech.com.tw where you can find the latest information

about the product.

2. Contact your distributor, sales representative, or Advantech's

customer service center for technical support if you need additional

assistance. Please have the following information ready before you

call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version,

application software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Warning! 1. Input voltage rated 19Vdc~26Vdc, 3A max

2. Use a 3 V @ 195 mA lithium battery

3. Packing: please carry the unit with both hands,

handle with care

4. Our European representative:

Advantech Europe GmbH

Kolberger Straße 7

D-40599 Düsseldorf, Germany

Tel:49-211-97477350

Fax: 49-211-97477300

5. Maintenance: to properly maintain and clean the

surfaces, use only approved products or clean with a

dry applicator

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened

only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to

the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRON-

MENT WHERE THE STORAGE TEMPERATURE IS BELOW -20° C (-4° F)

OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-1:1982 is no

more than 70dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine

Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur

Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich

sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder

Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-

zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann. Es

sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung

vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in

das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und

von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioni ert

oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Bitte lassen Sie das Gerät nicht unbehehrt hinten unter -20° C (-4° F) oder oben

60° C (140° F), weil diesen Temperaturen das Gerät zerstören könten.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70

dB(A) oder weiger.

DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Contents

CHAPTER 1 GENERAL INFORMATION ...... 1

1.1 Introduction .................................................................. 2

1.2 General Specifications ................................................ 3

1.3 LCD Specifications ..................................................... 7

1.4 Dimensions ................................................................. 8

CHAPTER 2 SYSTEM SETUP ..................... 9

2.1 A Quick Tour of the Panel PC .................................... 10

2.2 Installation Procedures .............................................. 12

2.2.1 Connecting the power cord ............................................ 12

2.2.2 Connecting the keyboard or mouse ............................... 12

2.2.3 Switching on the power ................................................. 12

2.3 Running the BIOS Setup Program ............................. 13

2.4 Installing System Software ......................................... 14

2.4.1 Method 1: Use the Ethernet .......................................... 14

2.4.2 Method 2: Use an FDD.................................................. 14

2.4.3 Method 3: Use the COM or parallel port ........................ 14

2.4.4 Method 4: Use a 3.5" HDD or CD-ROM ......................... 14

2.5 Installing the Drivers .................................................. 15

CHAPTER 3 HARDWARE AND PERIPHERAL

INSTALLATION ................................... 17

3.1 Overview of Hardware Installation and Upgrading ...... 18

3.2 Installing the 2.5" Hard Disk Drive (HDD)................... 18

3.3 Installing the Central Processing Unit (CPU) and

SDRAM Memory Module ...................................... 20

3.4 Floppy drive and 2nd hard drive/CD-ROM installation 26

3.4.1 Floppy drive installation ................................................. 26

3.4.2 2nd hard drive or CD-ROM drive installation ................... 27

3.5 Adapter cable installation .......................................... 28

CHAPTER 4 JUMPER SETTINGS AND

CONNECTORS ..................................... 29

4.1 Jumpers and Connectors .......................................... 30

4.1.1 Setting jumpers ............................................................. 30

4.1.2 Jumpers and switch ...................................................... 31

4.1.3 Locating jumpers and switch ......................................... 32

4.1.4 Connectors ................................................................... 33

4.1.5 Locating connectors ...................................................... 34

4.2 CMOS Clear for External RTC (JP7) ......................... 35

4.3 COM-port Interface .................................................... 35

4.3.1 COM2 RS-232/422/485 setting (JP2, JP3, JP4)............. 35

4.3.2 COM3 / COM4 pin 9 output type setting (JP5) .............. 37

4.4 VGA Interface............................................................ 37

4.4.1 LCD panel power setting ............................................... 37

4.5 Watchdog Timer Configuration .................................. 38

CHAPTER 5 PCI BUS ETHERNET

INTERFACE ........................................ 39

5.1 Introduction ................................................................ 40

5.2 Installation of Ethernet Driver ..................................... 40

5.2.1 Installation for Windows 98............................................ 41

5.2.2 Installation for Windows NT ........................................... 44

5.2.3 Installation for Windows 2000/ME ................................. 46

5.3 Further Information .................................................... 46

CHAPTER 6 AGP SVGA SETUP ................ 47

6.1 Introduction ................................................................ 48

6.1.1 Chipset ......................................................................... 48

6.1.2 Display memory ............................................................ 48

6.2 Installation of SVGA Driver ........................................ 48

6.2.1 Installation for Windows 98............................................ 49

6.2.2 Installation for Windows NT ........................................... 50

6.2.3 Installation for Windows 2000 ........................................ 53

6.2.4 Installation for Windows ME .......................................... 54

6.3 Further Information .................................................... 55

CHAPTER 7 AUDIO ................................. 57

7.1 Introduction ................................................................ 58

7.2 Installation of Audio Driver ......................................... 58

7.2.1 Installation for Windows 98............................................ 59

7.2.2 Installation for Windows NT ........................................... 61

7.2.3 Installation for Windows 2000/ME ................................. 63

CHAPTER 8 AWARD BIOS SETUP ............ 65

8.1 Award BIOS Setup .................................................... 66

8.2 CMOS Setup Utility ................................................... 66

8.3 Standard CMOS Setup ............................................. 67

8.3.1 Hard disk configurations ................................................ 68

8.4 BIOS Features Setup ................................................ 69

8.5 Chipset Features Setup ............................................ 73

8.6 Power Management Setup ........................................ 75

8.7 PNP/PCI Configuration Setup ................................... 77

8.8 Load BIOS Defaults .................................................. 78

8.9 Load Setup Defaults.................................................. 79

8.10 Integrated Peripherals ............................................. 79

8.11 Password Setting .................................................... 80

8.12 IDE HDD Auto Detection ......................................... 82

8.13 Save and Exit Setup ................................................ 83

8.14 Exit Without Saving ................................................. 83

CHAPTER 9 TOUCHSCREEN .................... 85

9.1 Introduction ................................................................ 86

9.1.1 General information ....................................................... 86

9.1.2 General specifications ................................................... 86

9.1.3 Environmental specifications ......................................... 86

9.2 Installation of Touchscreen Drivers ............................. 87

9.2.1 Installation for Windows 98/ME ..................................... 88

9.2.2 Installation for Windows NT ........................................... 92

9.2.2 Installation for Windows 2000 ........................................ 97

Table of contents

Other Advantech Touch Panel manuals

Advantech

Advantech PPC-57 Series User manual

Advantech

Advantech PPC-3151W Installation and operation manual

Advantech

Advantech TPC-1070 User manual

Advantech

Advantech PPC-3150SW Installation and operation manual

Advantech

Advantech PPC-612 Installation and operation manual

Advantech

Advantech PPC-150 Series User manual

Advantech

Advantech HMI-640S User manual

Advantech

Advantech PPC-3210SW User manual

Advantech

Advantech PPC-L62T User manual

Advantech

Advantech PPC-S154T User manual

Advantech

Advantech PPC-154 User manual

Advantech

Advantech PPC-6121 User manual

Advantech

Advantech PPC-L106T User manual

Advantech

Advantech IPPC-9151 Series User manual

Advantech

Advantech SPC-515 Series User manual

Advantech

Advantech PPC-3060S User manual

Advantech

Advantech IPPC-7157 Series User manual

Advantech

Advantech TPC-1270 User manual

Advantech

Advantech PPC-125 User manual

Advantech

Advantech PPC-A84 User manual

Advantech

Advantech PPC-3100-RE9A Installation and operation manual

Advantech

Advantech PPC-3150SW User manual

Advantech

Advantech IPPC-4001 Series User manual

Advantech

Advantech PPC-3151SW User manual

Popular Touch Panel manuals by other brands

FlowLine

FlowLine Data loop quick start

ALPEX

ALPEX AEx-8 P Series user manual

Ltech

Ltech E5S manual

Harman

Harman AMX MODERO S MSD-701-L2 quick start guide

Acnodes

Acnodes PC 1150 installation guide

AIS

AIS IP10IA99 series user guide

IBASE Technology

IBASE Technology ASTUT-152-RE1S user manual

YASKAWA

YASKAWA TP 610C manual

B&R

B&R Power Panel C Series user manual

Beijer Electronics

Beijer Electronics X2 control Hardware and installation manual

AXIOMTEK

AXIOMTEK GOT321W-521 user manual

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Operation manual

Qomo

Qomo QIT1386 user manual

DFI

DFI KS104-CD user manual

AMX

AMX AXP-PPC Dimensional drawing

Sartorius

Sartorius X3 PR 5410 operating manual

AMX

AMX Modero X Series quick start guide

B&R Industries

B&R Industries MAPPC900-ENG user manual