Advantech UNO-2160 User manual

UNO-2160

Celeron-400 Universal Network

Controller with PC/104 extension

User Manual

UNO-2160 User Manual ii

nal manufacturer reserves the right to make improvements to the products

described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

the original manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original manufacturer

assumes no responsibility for its use, nor for any infringements upon the

rights of third parties that may result from such use.

Acknowledgements

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel® and Pentium® are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft

Corp.

C&T is a trademark of Chips and Technologies, Inc.

All other product names or trademarks are properties of their respective

owners.

Support

For more information on this and other Advantech products, please visit

our websites at: http://www.advantech.com

For technical support and service, please visit our support website at:

http://www.advantech.com/support/

This manual is for UNO-2160.

Part No. 2002160000

1st Edition, Printed in Taiwan Jan. 2004

iii

Product Warranty

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for one year

from the date of purchase.

This warranty does not apply to any products that have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details. If you think you have

a defective product, follow these steps:

Step 1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any on-

screen messages you get when the problem occurs.

Step 2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

Step 3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This

allows us to process your return more quickly.

Step 4. Carefully pack the defective product, a fully completed Repair

and Replacement Order Card and a photocopy proof of purchase

date (such as your sales receipt) in a shippable container. A prod-

uct returned without proof of the purchase date is not eligible for

warranty service.

Step 5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

UNO-2160 User Manual iv

v Table of Contents

Contents

Chapter 1 Overview ...........................................................2

1.1 Introduction ....................................................................... 2

1.2 Hardware Specifications ................................................... 3

1.3 Safety Precautions ............................................................. 4

1.4 Chassis Dimensions........................................................... 5

Figure 1.1:Chassis Dimensions....................................... 5

Chapter 2 Hardware Functionality ..................................8

2.1 Introduction ....................................................................... 8

Figure 2.1:Front panel of UNO-2160 ............................. 8

Figure 2.2:Rear panel of UNO-2160 .............................. 8

2.2 RS-232 Interface (COM1~COM2) ................................... 8

2.3 RS-232/422/485 Interface (COM3~COM4) ..................... 9

2.3.1 16C550 UARTs with 16-byte standard .......................... 9

2.3.2 RS-422/485 detection ..................................................... 9

2.3.3 Automatic Data Flow Control Function for RS-485 ...... 9

2.3.4 Termination Resistor (JP6) ............................................. 9

2.3.5 RS-232/422/485 Selection ............................................ 10

Figure 2.3:RS-422/485 jumper setting.......................... 10

Figure 2.4:RS-232 jumper setting................................. 10

2.3.6 RS-485 Auto Flow Control Mode and RS-422 Master/

Slave Mode Selection ...................................................... 11

Table 2.1:Auto Flow Control and RS-422 Slave/Master

Selection ........................................................... 11

2.3.7 IRQ and Address Setting .............................................. 12

Table 2.2:IRQ Setting via switch 1 at SW2.................. 12

Table 2.3:IRQ Setting via switch 1 at SW2.................. 12

2.4 LAN: Ethernet Connector .............................................. 13

2.5 Power Connector ............................................................. 13

2.6 PS/2 Keyboard and Mouse Connector ............................ 13

2.7 USB Connector ............................................................... 13

2.8 PCMCIA: PC Card Slot .................................................. 14

2.9 VGA Display Connector ................................................. 14

2.10 Battery Backup SRAM.................................................... 15

2.10.1 Lithium Battery Specification....................................... 15

Figure 2.5:The location of the lith. battery for SRAM . 15

2.11 Reset Button .................................................................... 15

Chapter 3 Initial Setup.....................................................18

3.1 Inserting a CompactFlash™ Card ................................... 18

3.2 Chassis Grounding .......................................................... 18

UNO-2160 User Manual vi

Figure 3.1:Chassis Grounding Connection................... 18

3.3 Connecting Power ........................................................... 19

3.4 Installing a Hard Disk ..................................................... 19

3.5 BIOS Setup and System Assignments ............................ 19

Appendix A System Settings and Pin Assignments ..........22

A.1 System I/O Address and Interrupt Assignment............ 22

Table A.1: UNO-2160 System I/O Ports ...................... 22

A.2 Board Connectors and Jumpers....................................... 24

Figure A.1:UNO-2160 conn. and jp. locations (fs) ...... 24

Figure A.2:UNO-2160 conn. and jp. locations (bs)...... 24

A.3 RS-232 Standard Serial Port (COM1~COM2) ............... 26

A.4 RS-232/422/485 Serial Port (COM3~COM4) ................ 27

A.5 Ethernet RJ-45 Connector (LAN1~LAN2)..................... 27

A.6 Phoenix Power Connector (PWR)................................... 28

A.7 PS/2 Keyboard and Mouse Connector ............................ 28

A.8 USB Connector (USB1~USB2) ...................................... 29

A.9 VGA Display Connector ................................................. 29

Appendix B Programming the Watchdog Timer .............32

CHAPTER

Overview

This chapter provides an overview of

UNO-2160’s specifications.

Sections include:

• Introduction

• Hardware specification

• Safety precautions

• Chassis dimensions

UNO-2160 User Manual 2

Chapter 1 Overview

1.1 Introduction

UNO-2160 is an embedded Application Ready Platform (ARP) that can

shorten your development time and offers rich networking interfaces to

fulfill extensive needs in different projects. Advantech’s Universal Net-

work Controller is designed to be a total solution for network enabled

Application Ready Platforms.

Leveraging field-approved and worldwide approved real-time OS tech-

nology, Advantech’s UNO-2000 series provides a Windows CE .NET

and Windows XP Embedded ready solution, and supports several stan-

dard networking interfaces, such as Ethernet, Wireless LAN, RS-232/

422/485 and so on. Because of its openness, great expansion capability

and reliable design (fanless and diskless), the UNO-2000 series are ideal

embedded platforms for implementing custom applications for diversi-

fied applications.

3 Chapter1

1.2 Hardware Specifications

• CPU: Celeron-400 MHz Ultra low-voltage version

• Memory: 256/512 MB SDRAM on board (Default: 256 MB SDRAM).

• Battery-backup RAM: 512 KB Battery-backup RAM

• VGA/Keyboard/Mouse: DB-15 VGA Connector, PS/2 keyboard and

mouse

• Serial Ports: 2 × RS-232 and 2 x RS-232/422/485 with DB-9 connec-

tors. Automatic RS-485 data flow control

• Serial Speeds: RS-232: 50~115.2 kbps, RS-422/485: 50~921.6 kbps

• LAN: Two 10/100 Base-T RJ-45 Ports

• USB interface: Two USB ports, USB UHCI, Rev. 1.1 compliant

• Printer port: One printer port

• PC Card: One PC Card slot. Supports CardBus (Card-32) Card and

16-bit (PCMCIA 2.1/JEIDA4.2) Card.

Supports +5 V, +3.3 V and +12 V @ 120 mA working power

• SSD: One internal Type I / Type II CompactFlash card slot

• LEDs: Power, IDE, Alarm for RAM Backup Battery

• PC/104: Two PC/104 Extension. (Optional)

• HDD: HDD extension kit for installation of one standard 2.5” HDD

• Anti-Shock: 20 G @ Wall mounting, IEC 68 2-27, half sine, 11 ms w/

HDD50 G @ Wall mounting, IEC 68 2-27, half sine, 11 ms w/CF

• Anti-Vibration: 2 Grms w/CF @IEC 68 section 2-64, random, 5 ~ 500

Hz, 1 Oct./min, 1 hr/axis.0.5 Grms w/ HDD @ IEC 68 section 2-64,

random, 5 ~ 500 Hz, 1 Oct./min, 1 hr/axis

• Power supply: 9 ~ 36 VDC

• Power consumption: Max. 35 W

• Operating temperature: -10~50°C (14~122° F)@ 5~85% relative

humidity.

• Relative humidity: 95% @ 40°C

• Weight: 1.6 kg

• Chassis size (W × L × H): 255 × 152 × 50 mm (10” × 6.0” × 2.0”)

• Software options: Windows® XP Embedded, Windows NT/2000/XP,

Windows CE .NET V4.2

UNO-2160 User Manual 4

1.3 Safety Precautions

The following sections tell how to make each connection. In most cases,

you will simply need to connect a standard cable.

Warning! Always disconnect the power cord from your

chassis whenever you are working on it. Do not

connect while the power is on. A sudden rush of

power can damage sensitive electronic compo-

nents. Only experienced electronics personnel

should open the chassis.

Caution! Always ground yourself to remove any static

electric charge before touching UNO-2160. Mod-

ern electronic devices are very sensitive to static

electric charges. Use a grounding wrist strap at

all times. Place all electronic components on a

static-dissipative surface or in a static-shielded

bag.

Table of contents

Other Advantech Controllers manuals

Advantech

Advantech SKY-4120B User manual

Advantech

Advantech WISE-4210-S231 Installation and operation manual

Advantech

Advantech UNO-2050E User manual

Advantech

Advantech WISE-2210 Installation and operation manual

Advantech

Advantech UNO-2050 User manual

Advantech

Advantech INTRAC 204 User manual

Advantech

Advantech MIC-3321 Installation and operation manual

Advantech

Advantech UNO-2182 User manual

Advantech

Advantech ADAM-5510 Series Installation and operation manual

Advantech

Advantech ADAM-5550KW Series User manual

Advantech

Advantech LNC-5800D Owner's manual

Advantech

Advantech ADAM-5511 User manual

Advantech

Advantech APAX-5580 User manual

Advantech

Advantech PCI-1241 User manual

Advantech

Advantech ADAM-5510/P31 User manual

Advantech

Advantech MIC-1816R Installation and operation manual

Advantech

Advantech PCM-26D2CA Installation and operation manual

Advantech

Advantech PCA-6781 Installation and operation manual

Advantech

Advantech B+B SmartWorx Wzzard BB-WSK-NRG-1 User guide

Advantech

Advantech ADAM-4500 User manual

Advantech

Advantech UNO-2053E User manual

Advantech

Advantech ADAM-5630 Series User manual

Advantech

Advantech ADAMView User manual

Advantech

Advantech MIC-3327DC01-A43E Installation and operation manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual