Advantech IPMI-1000 Installation and operation manual

IPMI-1000 Startup Manual 1

Before you begin installing your card, please make sure that

the following items have been shipped:

1. IPMI-1000 module x 1

2. Startup manual x 1 PN: 20061IPM100

3. Screw x 2 P/N: 19350304A0

4. Warranty Card x 1 P/N: 2190000902

5. VGA cable x 1 P/N: 1700020805

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

IPMI-1000

IPMI module, AST2300 chipset

Startup Manual

General Features

• Out of band (OS independent)

• User management

• Remote control

• System health

• Maintenance

SBC Support List

PPCE-7127G2-00A1E

PCE-5126WG2-00A1E

Note: For more SBC support list, please visit our website.

Mechanical and Environmental

• Dimensions: 68 mm x 31.5 mm

• Power supply type: 5 VSB

• Power requirements: 5 VSB @ 55mA

• Operating temperature: 0 ~ 60° C

• Operating humidity: 60° C @ 85% RH, Non-Condensing

• Storage temperature: -40 ~ 85° C

• Storage humidity: 60° C @ 95% RH, Non-Condensing

• Weight: 0.48 kg

There are four connectors on the module and one of them

is used to connect with SBC. The below table lists the func-

tions of these connectors.

Connectors

Label Function

BMC1 IPMI connector

VGA1 VGA1 connector

MRCROSD1 Local media device

IPMB Reserved

Specications

Packing List

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eplatform

For technical support and service, please visit our

support website at:

http://support.advantech.com

This manual is for the IPMI-1000 Series.

Part No. 2006IPM100

Print in China

1st Edition

October 2012

Connectors

2 IPMI-1000 Startup Manual

1. Please connect IPMI module to the SBC BMC1

connector using the following steps.

1). Connector BMC1 and the screw holes on your SBC.

If your SBC is either PCE-7127 or PCE-5126WG2,

you will ﬁnd two screw holes around BMC1.

Figure1: Locations of BMC1 & Screw holes on SBC

2). Connector BMC1 and standoffs on IPMI-1000.

Figure 2: Locations of BMC1 & standoffs on module

3). Connect the SBC and IPMI-1000 with BMC1

connector.

Figure 3: Assembling module

4). Align the screw holes, and ﬁx securely with the

screws.

Figure 4: Fixing the screws

2. After setting up the hardware conﬁguration, users

should also complete BIOS settings. Please check the

information below to ﬁnd out corresponding instructions

to enable the IPMI function.

Enter Server Mgmt, “BMC Support” and “Wait for BMC”

are [Enabled] as default setting.

Figure 5: BMC support setting

Enter BMC network conﬁguration, the default

Conﬁguration Address source is [Unspeciﬁed]. Change

Address source to [Static], there is a default IP address

for user setting in the ﬁrst time.

Figure 6: BMC network conguration setting

Note: At ﬁrst time initialing IPMI-1000, it may take around

30~40 seconds before posting BIOS. When F/W is ready,

the LED light of module will be ﬂashing.

Installation Guide

IPMI-1000 Startup Manual 3

Figure 7: IPMI-1000 Top side Board Layout

Figure 8: IPMI-1000 Bottom side Board Layout

Board Layout and Dimension

Other manuals for IPMI-1000

Other Advantech Control Unit manuals

Advantech

Advantech ADAM-6051 User manual

Advantech

Advantech Adam 4000 Series User manual

Advantech

Advantech ADAM-5240 User manual

Advantech

Advantech PCL-812PG User manual

Advantech

Advantech MOS-1130Y-0201E User manual

Advantech

Advantech PCM-3524 User manual

Advantech

Advantech iDAQ-815 User manual

Advantech

Advantech EH-8100 User manual

Advantech

Advantech PCM-3612I Installation and operation manual

Advantech

Advantech Network Device USB-4761 Installation and operation manual

Advantech

Advantech PCM-3664 Installation and operation manual

Advantech

Advantech PCM-3345 User manual

Advantech

Advantech AMAX-175 Series User manual

Advantech

Advantech PCM-2610B Installation and operation manual

Advantech

Advantech IPMI-1000 Installation and operation manual

Advantech

Advantech PCM-3680 Installation and operation manual

Advantech

Advantech iDAQ-817 User manual

Advantech

Advantech RISC SOM-A2558 Series User manual

Advantech

Advantech PCM-24BXWF Installation and operation manual

Advantech

Advantech MOS-2110Z-1201E User manual

Advantech

Advantech USB-4711A User manual

Advantech

Advantech ADAM-3016 User manual

Advantech

Advantech B+B SmartWorx IE-iMcV-2xLIM User manual

Advantech

Advantech PCM-3618 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual