Advantech PCA-6176 Series User manual

PCA-6176 Series

Full-size Pentium®II/III

processor-based

PCI/ISA-bus CPU card

This document is copyrighted, 1999, by Advantech Co., Ltd. All

rights are reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech

Co., Ltd. assumes no responsibility for its use, nor for any in-

fringements upon the rights of third parties which may result from its

use.

Acknowledgements

• Adaptec and EZ-SCSI are trademarks of Adaptec Inc.

• AMI is a trademark of AMZ Technologies Corp.

• AWARD is a trademark of AWARD Software, Inc.

• AMD is a trademark of Advanced Micro Devices, Inc.

• IBM and PC are trademarks of International Business Machines

Corporation.

• Intel is a trademark of Intel Corporation.

• MS-DOS is a trademark of Microsoft Corporation.

• SMC is a trademark of Standard Microsystems Corporation.

• NCR is a trademark of NCR Corporation.

All other product names or trademarks are the properties of their

respective owners.

Part No. 2006617610

2nd Edition Printed in Taiwan May 1999

A Message to the Customer

Advantech customer services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical support

We want you to get the maximum performance from your products.

So if you run into technical difficulties, we are here to help. For the

most frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the

installation and operation of any of our products.

Other PCA-6176 Series features appear elsewhere in this manual

PCA-6176 series comparison table

Model PCA-6176L PCA-6176 PCA-6176F PCA-6176S PCA-6176E

CPU Intel: Pentium®II/III

350 ~ 500 MHz Intel: Pentium®II/III

350 ~ 500 MHz

System

chipset Intel 440 BX Intel 440 BX Intel 440 BX Intel 440 BX Intel 440 BX

BIOS Award, P&P Award, P&P Award, P&P Award, P&P Award, P&P

L2 cache 512 KB 512 KB 512 KB 512 KB 512 KB

Max. system

RAM 1 GB SDRAM 1 GB SDRAM 1 GB SDRAM 1 GB SDRAM 1 GB SDRAM

VGA (AGP) x ATI 3D Rage Pro

Turbo ATI 3D Rage Pro

Turbo

LAN x x 10/100Base-T,

Intel 82558 x10/100Base-T,

Intel 82558

SCSI x x Adaptec 7890

Ultra2 SCSI

32-bit

Adaptec 7890

Ultra2 SCSI

32-bit x

HISA üüüüü

USB 22222

EIDE 44444

2S/1P üüüüü

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial Inspection

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCA-6176 Pentium®II/III single board computer

• 1 Pentium II/III CPU, and 1 cooling fan (optional)

• 1 PCA-6176 User's Manual

• Utility disks/CD with VGA BIOS

• 2 Ethernet driver disks/CD (PCA-6176E/F only)

• SCSI driver disks/CD (PCA-6176S/F only)

• 1 bus master driver disk/CD

• 2 disks/CD for OBS Win95 drivers

• 1 FDD cable

• 2 EIDE HDD cables

• 1 printer cable and 1 serial port cable

• 1 temperature sensor cable

• 1 ivory cable for keyboard and mouse

• 1 SCSI cable (Ultra/Ultra Wide) (PCA-6176S/F only)

• 1 USB cable (optional)

• 1 ATX-to-PS/2 power cable

• 1 Pentium®II/III CPU retention module (factory installed)

If any of these items are missing or damaged, contact your

distributor or sales representative immediately.

We have carefully inspected the PCA-6176 mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6176, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or

it fails to meet the specifications, notify our service department or

your local sales representative immediately. Also notify the carrier.

Retain the shipping carton and packing material for inspection by the

carrier. After inspection, we will make arrangements to repair or

replace the unit.

Contents

Chapter 1 Hardware Configuration.............................. 1

1.1 Introduction........................................................................2

1.2 Features...............................................................................3

1.3 Specifications ......................................................................4

System..................................................................................4

Memory................................................................................4

Input/Output .........................................................................4

VGA interface ......................................................................5

SCSI interface ......................................................................5

LAN .....................................................................................5

Industrial features ................................................................5

Mechanical and environmental specifications.....................6

1.4 Board Layout: Main Features ..........................................7

1.5 Jumpers and Connectors...................................................8

1.6 Board Layout: Jumper and Connector Locations ........10

1.7 Safety Precautions............................................................11

1.8 Jumper Settings................................................................12

1.8.1 How to set jumpers ...................................................12

1.8.2 CPU clock ratio setting (SW1) .................................12

1.8.3 CMOS clear (J1) .......................................................13

1.8.4 Watchdog timer output (J2) ......................................13

1.9 System Memory................................................................14

1.9.1 Sample calculation: DIMM memory capacity..........14

1.9.2 Supplementary information about DIMMs ..............15

1.10 Memory Installation Procedures ....................................16

1.11 Cache Memory .................................................................17

1.12 Mounting the CPU and Cooling Modules......................18

Chapter 2 Connecting Peripherals ............................ 21

2.1 Primary (CN1) and Secondary (CN2) IDE

Connectors ........................................................................22

2.2 Floppy Drive Connector (CN3).......................................23

2.3 Parallel Port Connector (CN4) .......................................23

2.4 SCSI Connector (CN5) ....................................................24

2.5 USB Connector (CN6) .....................................................24

2.6 VGA Connector (CN7) ....................................................25

2.7 Ethernet Connector (CN8) ..............................................25

2.8 Serial Ports (CN9: COM1; CN10: COM2)....................25

2.9 PS/2 Keyboard and Mouse Connector (CN11) .............26

2.10 External Keyboard Connector (CN12) ..........................27

2.11 IR Connector (CN13).......................................................27

2.12 CPU Fan Connector (CN14) ...........................................27

2.13 CPU Temperature Sensor (CN15)..................................28

2.14 Front Panel Connectors

(CN16, CN17, CN18, CN19 and CN21)..........................28

2.14.1 Keyboard lock and power on LED (CN16) ............28

2.14.2 External speaker (CN17).........................................29

2.14.3 Reset (CN18)...........................................................29

2.14.4 IDE LED (CN19) ....................................................29

2.14.5 ATX soft power switch (CN21)..............................29

2.15 ATX Power Control Connectors (CN20 and CN21).....29

2.15.1 ATX feature connector (CN20) and soft power

switch connector (CN21) .......................................29

2.15.2 Controlling the soft power switch...........................30

Chapter 3 Award BIOS Setup ..................................... 31

3.1 Introduction......................................................................32

3.2 Entering Setup..................................................................32

3.3 Standard CMOS Setup....................................................33

3.4 BIOS Features Setup .......................................................34

3.4.1 Virus Warning...........................................................34

3.4.2 Quick Power On Self Test ........................................35

3.4.3 Boot Sequence...........................................................35

3.4.4 Boot Up Floppy Seek ................................................35

3.4.5 Boot Up NumLock Status .........................................36

3.4.6 Gate A20 Option .......................................................36

3.4.7 Typematic Rate Setting.............................................36

3.4.8 Typematic Rate (Chars/Sec) .....................................36

3.4.9 Typematic Delay (msec) ...........................................36

3.4.10 Security Option .......................................................36

3.4.11 PCI/VGA Palette Snoop..........................................37

3.4.12 OS Select for DRAM > 64 MB...............................37

3.4.13 Video BIOS Shadow ...............................................37

3.4.14 C8000-CBFFF Shadow / DC000-DFFFF Shadow .37

3.5 Chipset Features Setup....................................................38

3.6 Power Management Setup ..............................................39

3.6.1 Power Management ..................................................39

3.6.2 HDD Power Management.........................................39

3.6.3 Soft-Off by PWR-BTTN...........................................40

3.7 PCI Configuration Setup.................................................40

3.7.1 IRQ-xx assigned to : PCI/ISA PnP ...........................41

3.7.2 DMA-x assigned to : PCI/ISA PnP...........................41

3.7.3 Used MEM base addr : N/A......................................41

3.8 Load BIOS Defaults .........................................................42

3.9 Load Setup Defaults.........................................................42

3.10 Integrated Peripherals.....................................................42

3.11 Password Setting ..............................................................43

3.12 IDE HDD Auto Detection ................................................43

3.13 Save & Exit Setup ............................................................44

3.14 Exit Without Saving.........................................................44

Chapter 4 AGP VGA Setup ......................................... 45

4.1 Before you begin...............................................................46

4.2 Features.............................................................................46

4.3 Installation ........................................................................47

4.4 Driver installation ............................................................48

4.5 Windows 95/98 Drivers Setup Procedure ......................49

4.6 Windows NT Drivers Setup Procedure..........................55

This manual suits for next models

Table of contents

Other Advantech Computer Hardware manuals

Advantech

Advantech ARK-1380 User manual

Advantech

Advantech PCI-1716 User manual

Advantech

Advantech ARK-1551 User manual

Advantech

Advantech PCI-1752U User manual

Advantech

Advantech MIC-6311 User manual

Advantech

Advantech PCM-4380 Installation and operation manual

Advantech

Advantech AIMB-723 User manual

Advantech

Advantech PCA-6188 User manual

Advantech

Advantech PCA-6740 User manual

Advantech

Advantech AIMB-217 User manual

Advantech

Advantech ASMB-935 Series User manual

Advantech

Advantech ASMB-610V3 Installation and operation manual

Advantech

Advantech PCE-5124 User manual

Advantech

Advantech MIC-715 User manual

Advantech

Advantech MIO-5375 Installation and operation manual

Advantech

Advantech PCIE-1841 User manual

Advantech

Advantech PCL-734 User manual

Advantech

Advantech PCM-26R1EC User manual

Advantech

Advantech PCLD-8751 User manual

Advantech

Advantech PCA-6742 Series User manual

Advantech

Advantech PCA-6144S User manual

Advantech

Advantech DS-570 User manual

Advantech

Advantech ECU-P1522LPE Installation and operation manual

Advantech

Advantech AMAX-5400 Series User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual