ADTRAN NetVanta Analog Modem Dial Backup Interface... User manual

NETVANTA ANALOG MODEM DIAL BACKUP INTERFACE MODULE (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

• ITU V.90 Compliant

• Async

INSTALLATION INSTRUCTIONS

1. Remove power from the base unit.

2. If the Network Interface Module (NIM) is already in the

NetVanta chassis, release the pins at both edges of the

NIM faceplate and slide the module out of the chassis.

3. Carefully align the P1 connector on the NIM with the J1

connector on the analog modem DIM. Using only

fingertip pressure so that neither circuit board bends or

flexes, ensure that the connectors are firmly seated.

Secure the analog modem DIM to the NIM using the

screws and standoff posts supplied.

12 VDC

POWER

CONSOLE

LAN

SLOT 1 NET/D BU

WAN-DDS DBU

4. Slide the NIM with the analog modem DIM attached

into the NetVanta option slot until the NIM is firmly

seated against the back of the chassis.

5. Secure the pins at both edges of the NIM.

6. Connect the cables to the associated device(s).

7. Complete installation of the base unit.

8. Restore power to the base unit.

ANALOG MODEM DBU (RJ-48C) CONNECTION PINOUT

Pin Name Description

1-3 — Unused

4 R Network-Ring

5 T Network-Tip

6-8 — Unused

INSTALLATION INSTRUCTIONS (CONTINUED)

NETVANTA ANALOG MODEM DIAL BACKUP INTERFACE MODULE (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

alias <text>

Comment line to provide the text name assigned by the SNMP network management system.

caller-id override always <number>

Forces a replacement of the incoming caller ID number with the number given. The received

caller ID, if any, is discarded, and the given override number is used to connect the incoming

call to a circuit of the same number. Use no caller-id override (default) to disable any caller

ID overrides.

caller-id override if-no-CID <number>

Allows a replacement of the received caller ID number, but only if there is no caller ID

available on the incoming call. The received caller ID, if available, is used to connect the call.

However, if no caller ID is received, the given override number is used to connect the

incoming call to a circuit of the same number.

description <text>

Comment line to provide an identifier for this interface (for example, circuit ID, contact

information, etc.).

dialin

Enables the modem for remote console dialin disabling the use of the modem for dial-backup.

shutdown

Turns off the unit. The no version of this command turns the interface on and allows it to pass

data.

ANALOG MODEM DIAL BACKUP DIM COMMANDS

Table of contents

Other ADTRAN Network Hardware manuals

ADTRAN

ADTRAN NetVanta T1/FT1 + DSX-1 User manual

ADTRAN

ADTRAN Fractional T1 Tandem Channel Unit FT1-TDM User manual

ADTRAN

ADTRAN NetVanta 2000 Series User manual

ADTRAN

ADTRAN DSU IQ User manual

ADTRAN

ADTRAN Total Access 362R User manual

ADTRAN

ADTRAN OSU 300 User manual

ADTRAN

ADTRAN 1202801L1 User manual

ADTRAN

ADTRAN TRACER 4106 Plan User guide

ADTRAN

ADTRAN jobAid NetVanta 838T User manual

ADTRAN

ADTRAN MX2800 STS-1 User guide

ADTRAN

ADTRAN NetVanta 1000 Series Manual

ADTRAN

ADTRAN eSBC User manual

ADTRAN

ADTRAN ATLAS 550 User manual

ADTRAN

ADTRAN NetVanta Series User manual

ADTRAN

ADTRAN Total Access 300 Series User manual

ADTRAN

ADTRAN TSU LT User manual

ADTRAN

ADTRAN AOC QSFP28 100G AOC QSFP28 100G 3M User manual

ADTRAN

ADTRAN NetVanta Series User manual

ADTRAN

ADTRAN HTU-C User manual

ADTRAN

ADTRAN TOTAL ACCESS 600R User manual

ADTRAN

ADTRAN NetVanta 1531 Series Manual

ADTRAN

ADTRAN DSU III ARdc User manual

ADTRAN

ADTRAN Total Access 334 User manual

ADTRAN

ADTRAN DS3 MX User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide