ADEMCO VISTA 10 User manual

Ademco Vista 10 Quick Guide

https://alpha.adt.com/help/39.html[11/8/2018 11:50:29 PM]

Ademco Vista 10 Quick Guide

For a detailed review of the entire system, please view the Ademco Vista 10 manual.

« Help Center

Arm &

Disarm the

System

Battery Bypass

Protected

Areas

Chimes &

Beeps

Reset Security

Codes

Trouble

Conditions

Volume

Arm and Disarm

Arm:

To arm all sensors in STAY mode when you are not leaving the premises, enter your [security code]

+ [STAY].

To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +

[AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX]

Select

Ademco Vista 10 Quick Guide

https://alpha.adt.com/help/39.html[11/8/2018 11:50:29 PM]

Disarm:

To disarm, enter your [security code] + [OFF].

For more information on this topic please visit the complete Ademco Vista 10 manual.

Battery

The Ademco Vista 10 operates on a UB 1270 battery.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by BAT.

For instructions on replacing your battery, please go to the Battery Replacement Page for this

battery.

Bypass Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number.]

To unbypass a zone, disarm the system.

For more information on this topic please visit the complete Ademco Vista 10 manual.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected

door/window is opened.

To turn chime mode on and off, enter your [security code] + [CHIME].

For more information on this topic please visit the complete Ademco Vista 10 manual.

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the

alarm event history.

Security Codes

Your system allows for up to 5 additional users, however only the Master user can assign user codes to

Ademco Vista 10 Quick Guide

https://alpha.adt.com/help/39.html[11/8/2018 11:50:29 PM]

Return to Top

users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To add a duress code, simply add 1 digit higher than the master code. For example, if the master

code is 1234, the duress code will be 1235. *The duress code is used when a user is forced to arm

or disarm the system against their will.

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three

seconds for the keypad to verify.

For more information on this topic please visit the complete Ademco Vista 10 manual.

Trouble Conditions

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key

will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your

attention. Check the specified zone area, close any open doors or windows and enter your security code

and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some

change in the environment of the protected area.

To silence trouble beeps, press any key or enter your security code and press [OFF].

For a complete list of Trouble Conditions, please refer to the Safewatch and Ademco Systems

Troubleshooting page.

Volume

The volume on the Ademco Vista 10 is not adjustable.

How can we help?

Table of contents

Other ADEMCO Security System manuals

ADEMCO

ADEMCO Vista-20 User manual

ADEMCO

ADEMCO Vista-10P Assembly instructions

ADEMCO

ADEMCO VISTA-128FBP Operating instructions

ADEMCO

ADEMCO 5120XM User manual

ADEMCO

ADEMCO 4110 User manual

ADEMCO

ADEMCO 676 User manual

ADEMCO

ADEMCO 4140XMPT2 User manual

ADEMCO

ADEMCO Vista 4130XT User manual

ADEMCO

ADEMCO VISTA-100 User manual

ADEMCO

ADEMCO Vista-10 User manual

ADEMCO

ADEMCO Vista-128BP Operating instructions

ADEMCO

ADEMCO 4140XMPT2 User manual

ADEMCO

ADEMCO 4130XM User manual

ADEMCO

ADEMCO VISTA-50PUL User manual

ADEMCO

ADEMCO Vista AT User manual

ADEMCO

ADEMCO V12C Operating instructions

ADEMCO

ADEMCO Vista-10SEa User manual

ADEMCO

ADEMCO Alpha Vista 5130XT User manual

ADEMCO

ADEMCO LYNXR-EN User manual

ADEMCO

ADEMCO 4286 - Ademco Phone Module User manual

ADEMCO

ADEMCO VISTA-250BP Assembly instructions

ADEMCO

ADEMCO VISTA-20P Series User manual

ADEMCO

ADEMCO LYNXR24 User manual

ADEMCO

ADEMCO Vista 4140XMPT User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual