ADEMCO VIA-30PSE User manual

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

Ademco Via 30PSE Quick Guide

For a detailed review of the entire system, please view the Ademco Via 30PSE manual.

« Help Center

Arm &

Disarm the

System

Battery Bypass

Protected

Areas

Date &

Time

Settings

Chimes &

Beeps

Reset Security

Codes

Trouble

Conditions

Volume

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].

To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX].

Disarm:

To disarm, enter your [security code] + [1].

Select

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Battery

The Ademco Via 30PSE operates on a UB 1270 battery.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by BAT.

For instructions on replacing your battery, please go to the Battery Replacement Page for this

battery.

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Bypass Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number].

To unbypass a zone, disarm the system.

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Change Date and Time

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [2] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

Your system communicates events using chimes and beeps.

The panel chimes twice when a protected door/window is opened.

To silence or enable chimes, scroll until the panel displays [Chimes], then press [OK].

Scroll to toggle [ON] or [OFF], then press [OK].

Press [Status] to exit.

A solid bell feature will appear in the display when Chime is enabled.

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

Return to Top

To turn chime mode on and off, enter your [security code] + [CHIME].

When your system is in chime mode, a chime alert will sound three tones whenever a protected

door/window is opened.

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the

alarm event history.

Security Codes

Your system allows for additional users, however only the Master user can assign user codes to users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three

seconds for the keypad to verify.

Trouble Conditions

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key

will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your

attention. Check the specified zone area, close any open doors or windows and enter your security code

and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some

change in the environment of the protected area.

To silence trouble beeps, press any key or enter your security code and press [OFF].

For a complete list of Trouble Conditions, please refer to the Safewatch and Ademco Systems

Troubleshooting page.

Volume

The volume on the Ademco Via 30PSE is not adjustable.

How can we help?

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

Other manuals for VIA-30PSE

Table of contents

Other ADEMCO Security System manuals

ADEMCO

ADEMCO VISTA-32FB User manual

ADEMCO

ADEMCO 4140XMPT2 User manual

ADEMCO

ADEMCO UVS User manual

ADEMCO

ADEMCO VISTA-20SEA User manual

ADEMCO

ADEMCO 4110 User manual

ADEMCO

ADEMCO 4110DL User manual

ADEMCO

ADEMCO VISTA-100 User manual

ADEMCO

ADEMCO V12C Operating instructions

ADEMCO

ADEMCO Security System VISTA-10SE User manual

ADEMCO

ADEMCO VISTA-250BP Assembly instructions

ADEMCO

ADEMCO VISTA 10 User manual

ADEMCO

ADEMCO galaxy 8 User manual

ADEMCO

ADEMCO Vista-10SEa User manual

ADEMCO

ADEMCO Vista Series 4120EC User manual

ADEMCO

ADEMCO Vista-128FB User manual

ADEMCO

ADEMCO LYNXR24 User manual

ADEMCO

ADEMCO Ademco VISTA-40 Operating instructions

ADEMCO

ADEMCO Alert II User manual

ADEMCO

ADEMCO VISTA-20PS Assembly instructions

ADEMCO

ADEMCO Ademco N7001V2 User manual

ADEMCO

ADEMCO 4080 User manual

ADEMCO

ADEMCO VISTA-32FB Assembly instructions

ADEMCO

ADEMCO VISTA-20P Series User manual

ADEMCO

ADEMCO Vista-10P Assembly instructions

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual