Adaptec SBC-596 User manual

SBC-596/599

Pentium MMX, K6 Full-size CPU

Card with LCD, Ethernet, SCSI

& High Drive

This document is copyrighted, 1998. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result

from its use.

Acknowledgements

Adaptec, and EZ-SCSI are trademarks of Adaptec Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

C&T is a trademark of Chips and Technologies, Inc.

CyrixisatrademarkofCyrixCorporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows ®is a registered trademark of Microsoft Corp.

RTLisatrademarkofRealtek Semi-Conductor Co., Ltd.

SMC is a trademark of Standard Microsystems Corporation.

UMC is a trademark of United Microelectronics Corporation.

All other product names or trademarks are properties of their

respective owners.

Part No. 2047596000 1st Edition

Printed in Taiwan September 1998

DearCustomer:

We are notifying you that SBC-596/599 has some compatibility

issues with some Seagate hard disk drives.

Owing to some limitations with the Seagate controller’s specifica-

tions,wefoundtheIntel430TX chipset cannot work with some

Seagate hard disk drives. Seagate promises to solve this issue in

the new controller. Please check with Seagate for further informa-

tion. We recommend users who plan to use the following Seagate

hard disk drives models with the SBC-596/599 check with Seagate

regardingtheavailabilityof a new controller:

ST31277A 1.28GB

ST31720A 1.7 GB

ST32531AC 2.5 GB

ST33240AC 3.2 GB

June1998

ledoMledoMledoMledoMledoM995-CBS995-CBS995-CBS995-CBS995-CBS695-CBS695-CBS695-CBS695-CBS695-CBS

UPC letnIletnIletnIletnIletnIC55P,C45P:

zHM002~57)XMM(

DMA6K,5K:

xiryC2M,1M:

letnIletnIletnIletnIletnIC55P,C45P:

zHM002~57)XMM(

DMA6K,5K:

xiryC2M,1M:

metsyS

tespihC XT034XT034

SOIBPnP,drawAPnP,drawA

ehcac2LBK215BK215

.xaM

metsyS

MARODEBM652ODEBM652

AGV

DCL/TRC

05556T&C

NAL9208LTR,TesaB01

ISCStib-61

evirDhgiHAm46xx

BSU22

EDIE44

P1/S2

SBC-596/599 series comparison table

Refer to the SBC-596/599 features directly in the following

manual

Packing list

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 SBC-596/599CPUCard

• 1 Supporting CD-ROM

• 1 IDE cables

• 1 FDD cable

• 1 PS/2 keyboard and mouse connector

• 1 serial/ 1 parallel bracket cable

• 1 Quick Installation Guide

• 1 UltraSCSIcable(SBC-599only)

If any of these items are missing or damaged, contact your

distributor or sales representative immediately.

Contents

Chapter 1 General Information ................................... 1

Introduction ........................................................................... 2

Features.................................................................................. 2

Specifications ......................................................................... 3

Board layout and dimensions .............................................. 5

Chapter 2 Installation Guide ........................................ 7

Jumpers.................................................................................. 8

Connectors............................................................................. 9

Locating jumpers ................................................................ 10

Locating connectors ........................................................... 11

Setting jumpers ................................................................... 12

CPU installing and upgrading............................................ 13

Install a CPU in the ZIF socket ..............................................13

Voltage Select (J1, J2, J3, and J4) ...........................................14

Frequency Ratio (J5)...............................................................15

MTXC CLK Setting/P55C Enabled (J7) ................................16

Clock Setting (J8) ....................................................................16

Battery Select and Clear CMOS (J9) ...................................... 17

SCSI Select (J10).................................................................... 17

ISATiming(J11) .................................................................... 17

LCD/EL Select (J13) .............................................................. 18

Dual Power Select (J15) ......................................................... 18

Installing DRAM(SIMMs) .................................................. 19

InstallingSIMMs .................................................................... 19

Front panel connectors (CN1, CN2, CN3, CN4)................ 20

Speaker connector (CN1) ....................................................... 20

HDD LED connector (CN2)................................................... 20

Reset connector (CN3) ...........................................................20

Keyboard lock connector (CN4).............................................20

Fan power connector (CN5) .............................................. 21

SCSI connectors (CN6, CN7) ........................................... 21

IDE hard drive connectors (CN8, CN9).......................... 21

Floppy connector (CN10)..................................................... 22

Connecting thefloppy drive .................................................... 23

VGAinterfaceconnectors.................................................... 24

CRT connector (CN16) .......................................................... 24

Flat panel connector (CN11) ................................................... 24

LCD power select (J12).......................................................... 24

Keyboard connectors (CN12, CN19) .................................. 25

COM-port connectors (CN13, CN17) ................................. 26

Printerportconnector(CN14) ............................................ 26

IR connector (CN15) ............................................................ 26

USB connectors (CN18, CN20) ........................................... 27

Ethernet connector(UTP1) .................................................. 27

Watchdogtimerconfiguration ............................................ 28

Watchdog select (J14) ............................................................. 28

Chapter 3 Software Configuration ............................ 29

Introduction ........................................................................ 30

Utility ................................................................................... 30

VGA display software configuration ................................ 32

Connections for four standard LCDs.............................. 33

Connections to Sharp LM64183P, LM64P89

(640 x 480 DSTN MONO LCD) ........................................33

Connections to PLANAR EL (640 x 480 AD4 EL)................34

Connections to Toshiba LTM10C042

(640 x 480 TFT Color LCD)...............................................35

Connections to Sharp LM64C142

(640 x 480 DSTN Color LCD) ...........................................36

Ethernetsoftwareconfiguration..........................................37

Chapter 4 Award BIOS Setup ..................................... 39

System test and initialization ............................................ 40

Systemconfigurationverification ...........................................40

AWARD BIOS setup.......................................................... 41

Entering setup ........................................................................41

Standard CMOS setup ...........................................................42

BIOS features setup ..............................................................43

CHIPSET features setup .......................................................44

Power management setup......................................................45

PnP/PCI configuration ...........................................................46

Integrated peripherals ............................................................47

Load BIOS defaults ...............................................................48

Change password...................................................................49

Auto detect hard drive ...........................................................50

Chapter 5 PCI SVGA Setup......................................... 51

Before you begin................................................................ 52

Installation .......................................................................... 52

Simultaneous display mode .............................................. 53

Sleep mode.......................................................................... 53

Driver installation .............................................................. 54

Windows setup .......................................................................55

DOS setup..............................................................................56

Windows 95 drivers setup procedure............................. 57

Windows NT drivers setup procedure ........................... 58

OS/2 drivers setup procedure ......................................... 59

Preliminary steps ....................................................................59

Installing from diskette ...........................................................59

Selecting monitor type ............................................................61

Selectingscreenresolution/refresh rate ...................................61

Installationnotes .....................................................................62

Chapter 6 SCSI Setup and Configuration .................. 63

Installationandsetup ..............................................................64

SCSIconfiguration guidelines .................................................64

SCSI ID numbers ...................................................................64

SCSIterminators ....................................................................65

InstallingSCSI devices ...........................................................68

ConnectinginternalSCSI devices ...........................................68

ConfiguringtheSCSI adapter .................................................69

Basic host adapter settings ......................................................71

Bootdevicesettings ................................................................72

SCSIdevicesettings ...............................................................72

Advanced host adapter settings...............................................75

UsingSCSISelectmenus ........................................................77

UsingtheSCSI disk utilities....................................................78

Installingdevice drivers...........................................................79

AdaptecEZ-SCSIutility ......................................................80

Quick start instructions ...........................................................80

Windows 95 or Windows NT .................................................80

Windows/WindowsforWorkgroups3.1X ..............................81

DOS........................................................................................81

Troubleshootingtips................................................................81

SCSI devicetroubleshooting ...................................................81

Windows 95/Windows NT troubleshooting ............................82

Information for DOS/Windows 3.1X users ............................85

DOS and Windows 3.1X device drivers .................................85

DOS and Windows 3.1X ASPI managers...............................85

DOSformatting utilities ..........................................................86

Formatter and partitioner (afdisk) ...........................................87

Appendix A Programming the Watchdog Timer .......... 91

Programming the watchdog timer ................................... 92

Appendix B Pin Assignments ........................................ 93

Speaker connector (CN1) ......................................................94

HDD LED connector (CN2) .................................................94

Reset connector (CN3)..........................................................94

Power LED/keyboard lock connector (CN4) ........................95

Fan power connector (CN5)..................................................95

Wide SCSI connector (CN6) .................................................96

SCSI connector (CN7)...........................................................98

IDE hard drive connectors (CN8, CN9) ................................99

Floppy connector (CN10) ....................................................100

Flat panel connector (CN11)................................................101

EXT keyboard connector (CN12)........................................102

COM port connectors (CN13, CN17) .................................103

Printer port connector ( CN14)............................................104

IR connector (CN15) ...........................................................105

CRT connector (CN16) .......................................................105

USB connectors (CN18, CN20) ..........................................106

Keyboard and PS/2 mouse connector (CN19) ....................106

Ethernet connector (UPT1) .................................................107

Appendix C IRQ Default Settings ............................... 109

This manual suits for next models

Table of contents

Other Adaptec Computer Hardware manuals

Adaptec

Adaptec PM2865U3 User manual

Adaptec

Adaptec GDT8114RZ User manual

Adaptec

Adaptec CDP-00277-01-A User manual

Adaptec

Adaptec AAA-131U2 User manual

Adaptec

Adaptec M3093GX Operating and maintenance manual

Adaptec

Adaptec 2940U2W - Storage Controller U2W SCSI 80... User manual

Adaptec

Adaptec 2100S - SCSI RAID Controller Safety guide

Adaptec

Adaptec SCSI 58300 User manual

Adaptec

Adaptec Series 6 Reference guide

Adaptec

Adaptec 1200A User manual

Adaptec

Adaptec AAR-1220SA Instruction Manual

Adaptec

Adaptec 2100S - SCSI RAID Controller User manual

Adaptec

Adaptec AHA-1520 User manual

Adaptec

Adaptec GDT6111RP User manual

Adaptec

Adaptec ATA II 1220SA User manual

Adaptec

Adaptec ACB-5500 User manual

Adaptec

Adaptec ASR-3085 Operating manual

Adaptec

Adaptec Serial Attached SCSI (SAS) Expander Card User manual

Adaptec

Adaptec RAID 51245 How to use

Adaptec

Adaptec ARO-1130SA Assembly Instructions

Adaptec

Adaptec RAID 5405Z User manual

Adaptec

Adaptec SATA RAID FOR ADAPTEC User manual

Adaptec

Adaptec 2940U2W - Storage Controller U2W SCSI 80... User manual

Adaptec

Adaptec AAR-1220SA Instruction Manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual