Adaptec AFM-600 User manual

Installation Instructions

Adaptec Flash Backup Module AFM-600 for Adaptec Unified Serial™RAID Controllers

some jurisdictions.

Part Number: MAN-00260-01-A Rev B

Using the appropriate static protection, remove the controller from your computer.

1Insert screws through the bottom of the controller board, as shown in Figure 1.

Then, insert spacers on the screws.

2Attach the AFM-600DB (daughterboard) to the controller by mating the two black

connectors. Affix a hex nut to the end of each of the screws, as shown in Figure 2.

Caution: The torque should be less than 0.06Nm to avoid deformation. Do not use a

tool to hold the nut in place to avoid damaging the semi-conductor components on the

daughterboard near the screw holes. Be sure that the controller is not bent after

attaching the daughterboard to the controller card.

3Attach the AFM-600CC supercapacitor module to the controller by inserting the

connector into the socket on the AFM-600DB, as shown in Figure 3. The connector

attaches to the socket in only one direction.

4Choose a location on the chassis or in the system to fix the tethered supercapacitor

module using the included cable-ties such that (i) the cable (18.5") reaches the

mating location on the controller when it is installed in the expansion slot;

(ii) wiring is routed and secured so that it does not contact any moving parts (fans,

for instance); and (iii) the supercapacitor module is protected from heat.

5Thread the cable-ties through the slots on the supercapacitor module and fix to the

selected location on the computer chassis. The cable-ties should completely encircle the supercapacitor module to ensure that it is held

in place securely, as shown in Figure 4. Be careful not to restrict air-flow in your system.

6Reinstall the controller, and restart your computer.

7The supercapacitor starts charging automatically. It should reach full charge in 3-4 minutes.

Warning: (i) Do NOT remove or insert a fully charged supercapacitor module. Always discharge the unit first to avoid damage to the controller or

flash backup module. The factory ships with discharged units, so they are safe to install when you receive them. To ensure that an installed unit

is discharged, switch the system OFF, then wait 5 minutes. After a dirty shutdown, wait 3 minutes after backup is complete, then remove the

unit. (ii) There is a risk of explosion if the supercapacitor module is replaced by an incorrect type.

Figure 1 Figure 2

Spacers

Figure 3 Figure 4

Supercapacitor module

Table of contents

Other Adaptec Computer Hardware manuals

Adaptec

Adaptec 2410SA - Serial ATA RAID Controller User manual

Adaptec

Adaptec RAID Solutions Manual

Adaptec

Adaptec 2100S - SCSI RAID Controller User manual

Adaptec

Adaptec Series 6 Reference guide

Adaptec

Adaptec ACB-2320 User manual

Adaptec

Adaptec ARO-1130CA Assembly Instructions

Adaptec

Adaptec PM1564U3 User manual

Adaptec

Adaptec 2010S - SCSI RAID Storage Controller Safety guide

Adaptec

Adaptec Ultra Wireless AWN-8030 User manual

Adaptec

Adaptec PM1564U3 User manual

Adaptec

Adaptec 6405 User manual

Adaptec

Adaptec P Class 733/800/866MHz / 1GHz User manual

Adaptec

Adaptec 6405 User manual

Adaptec

Adaptec SBC-596 User manual

Adaptec

Adaptec 2045 User manual

Adaptec

Adaptec RAID 2405Q User manual

Adaptec

Adaptec AHA-1520 User manual

Adaptec

Adaptec 2045 User manual

Adaptec

Adaptec PM3332UW User manual

Adaptec

Adaptec 2100S - SCSI RAID Controller User manual

Adaptec

Adaptec ARO-1130SA Assembly Instructions

Adaptec

Adaptec GDT8114RZ User manual

Adaptec

Adaptec ATA II 1220SA User manual

Adaptec

Adaptec 4000SAS User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual