Adaptec AAR-1220SA Instruction Manual

--------------------------------------------------------------------------------

Updated Release notes for the AAR-1220SA, AAR-1225SA SATA HostRAID dated:

December 19, 2007

--------------------------------------------------------------------------------

This release notes contains the following:

1. Description of the release

2. Supported hardware

3. Supported Operating Systems

4. Major functional changes

5. Prerequisites of using the Software

6. Tested Configuration

7. Known Issues

8. Windows Registry Parameters

9. Linux Command Line Options

1. Description of the Release:

---------------------------------

Date of release: December 19, 2007

This is the official software release containing the list of software components

listed in the section 3 of the release note.

2. Supported Hardware:

--------------------------

The software release supports the following hardware listed below:

a. Adaptec AAR-1220SA SATA HostRAID controller

b. Adaptec AAR-1225SA SATA HostRAID controller

3. Supported Operating Systems:

------------------------------------

Windows Driver 32-bit and 64-bit (AMD & EM-64T) - 1.6-0 Build 12082

- Windows Server 2003 (x64 Standard, Enterprise Editions) SP2

- Windows Server 2003 (Standard, Enterprise,& Web Editions) SP2

- Windows Server 2003 R2 (x64 Standard & Enterprise Editions)

- Windows Small Business Server 2003 SP1

- Windows XP Professional, and x64 Edition, SP2

- Windows Vista Ultimate, Home, Business

Linux Driver - 32 bit - 1.6-0 Build 12082

Linux Driver - 64 bit - 1.6-0 Build 12082

IA-32 and x64:

- Red Hat Enterprise Linux 4.0: Initial Release, QU3, QU4 and QU5

- Red Hat Enterprise Linux 5.0: Initial Release

- SUSE Linux Enterprise Server 9: Initial Release, SP2 and SP3

- SUSE Linux Enterprise Server 10: Initial Release

Netware Driver - 1.6-0 Build 12082

- Netware 6.5 SP5 (No Port Multiplier support under Netware)

3.1 Adaptec Storage Manager:

---------------------------------

Adaptec Storage Manager and HRCONF - 5.10.0 Build 17173

Supported OS:

- Windows IA-32 and x64

- Linux IA-32 and x64

- Netware 6.5 (No Port Multiplier support under Netware)

3.2 BIOS and DOS Tools:

----------------------------

1. Expansion ROM BIOS (for all hardware) - 6.0-0 Build 2328

2. Adaptec Flash Utility (AFU.EXE) - 6.0-0 Build 2328

4. Major Functional changes:

--------------------------------

1. Added Port Multiplier support for AAR-1225SA with Silicon Image Port

Multiplier Model 3726

5. Prerequisites of Using the Software:

-------------------------------------------

- BIOS and the driver should use above stated software version.

6. Tested Configuration:

---------------------------

The software was tested with the Hardware Supported list on the motherboard with

the IBM PC/AT compatible PCIExpress platforms. These are the various components

used during the testing:

- IBM x86 PC/AT compatible platform with Intel Xeon

- Tested with direct attached SATA-I and SATA-II drives (For 1225SA SATA-II NCQ

enabled, and for 1220SA both NCQ enabled/disabled)

- Tested with Silicon Image Port Multiplier 3726

7. Known Issues/Limitations:

--------------------------------

1. Adaptec 1225SA controller does not support bootable devices.

2. Before rebooting the system,, make sure to initiate and fully complete the

clear operation in the BIOS-ACU on the RAID array which resides on the SIL 3726

Port Multiplier.

3. Boot CD will not boot successfully on certain Intel chipset models like

Q965. In such cases, the user needs to create arrays from the BIOS-ACU.

4. The SR1500 and SR2500 platforms do not complete the resource assignment to

the PCI configuration space of the 1220SA. Hence, the 1220SA BIOS cannot be

loaded successfully during POST.

5. 1225SA is not detected in SuperMicro X7DBE/X6DA8-G2 system, when the HBA is

inserted in a 'non-PCIe x4' slot.

6. Linux 64-bit

- RHEL4 QU3/64-bit - Compatibility issue with Supermicro X6DHE-G

Server Supermicro X6DHE-G Server has a problem with RHEL4 QU3/64 Bit. The system

hung when "formatting /boot file system...", and installation failed. This issue

happens even with IDE drives, and without Adaptec HostRAID controllers present

in the server. (ADPml00943)

7. NetWare 6.5 SP5

- Driver Failed to load if OS is installed in onboard IDE/SATA drive

Reason: IDE Driver takes over the control by default

Work Around: Remove loading of multiple IDEATA.HAM by modifying Startup.ncf,

and reboot. (ADPml00709)

8. Windows 32-bit and 64-bit

- Drive Letter may disappear after Medium Error on a Simple Volume

On a simple volume with Medium error, the error is reported to the Windows OS.

All the error handling is done by the operating system. The expected behavior is

intermittent and some times drive letter disappear.

- OS causes invalid data in file copy from Medium Error locations in specific

conditions

When read medium error occur in simple volume or RAID-0 or a good member of a

degraded RAID-1/RAID-10, file copy in Windows Explorer will fail the first few

times but will pass on the later attempts; however, the file gets copied has

invalid data in the section where the medium error was. This happens because of

the Windows OS caching invalid data.

9. Windows Vista

- An array cannot be created with one eSATA drive attached directly to the

1225SA, and one or more drives from a Port Multiplier enclosure connected to the

other port of 1225SA.

- With 1225SA and Port Multiplier configuration it is recommended to rebuild

degraded arrays in the ACU BIOS.

8. Windows REGISTRY PARAMETERS:

----------------------------------

8.1 Driver Specific Registry Parameters

WARNING: Altering or adding these driver parameters incorrectly can render your

system inoperable. Use them with caution.

Follow the instructions below to enter registry values that affect the

configuration information for the ADP3132 driver. Note that all HostRAID

adapters supported by the installed driver are affected by the

values you enter here.

The key used for this HostRAID release is "ADP3132". To enter driver-specific

parameters, follow these steps:

1) Select Run from the Start button.

2) Type "regedt32" and press Enter.

3) Open the registry list to the following location:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ADP3132

If the \Parameters\Device\ keys already exist, skip to step 6 to begin entering

parameters. If the keys do not yet exist, follow steps 4 and 5 to create them.

4) Click on the ADP3132 key. Select "New -> Key" from the Edit menu, type

"Parameters" in the "New Key #1" edit box, and press Enter.

5) Click on the Parameters key. Select the "New -> Key" from the Edit menu, type

"Device" in the "New Key #1" edit box, and press Enter. To specify a specific

host adapter, append Device with the number of the host adapter.

For example, type "Device0" for the first host adapter, "Device1" for the

second, etc. If you omit the host adapter number, the configuration information

will apply to all supported host adapters.

6) Go to the Parameters\Device key. Select "New -> String Value" from the Edit

menu, type "DriverParameters" in the "New Value #1" box, and press Enter twice.

The Edit String text box appears. Enter valid parameters in the text box. Use a

semicolon to separate multiple parameters. For example:

<Parameter1>=<Value1>;<Parameter2>=<Value2>;

MaximumSGList=17;PK=1;

NOTE: Changes made with the Registry Editor do not take effect until you reboot

your computer.

----------------------------------------------------------------

Option: Performance/Compatibility Settings

Definition: This registry option tunes the setting for performance purpose. This

registry option modifies the maximum number of I/Os and maximum number of

scatter gather elements or number of physical breaks. The setting can be set as

high or normal. When set to high it modifies the maximum I/Os to 255 and maximum

scatter gather list to 33. In this mode, system hibernation may not work. Use

the following parameter and value to modify the driver behavior.

To run driver in high performance: Use the registry file HIGHPERF.REG.

To run driver in normal mode: Use the registry file WHQL.REG.

Follow these steps to change the settings:

1) Select Run from the Start button.

2) Browse to the folder containing above mentioned version of the HostRAID

driver, select file "HIGHPERF.REG" or "WHQL.REG" and click OK.

NOTE: The default value for this parameter is normal mode and it supports system

hibernation.

Possible Values: Normal Mode - High Performance Mode

Default Value: Normal Mode

----------------------------------------------------------------

Option: ExposeEnclosure

Definition: This registry option changes the appearance of enclosure management

devices to the operating system. One can directly edit the registry and apply

the required changes to this option as explained in section 8.1.

There is another way to reflect expose enclosure change using the

"ENCLOSURE.REG" file. Follow these steps to change the settings:

1) Select Run from the Start button.

2) Browse to the folder containing above mentioned version of the HostRAID

driver, select file "ENCLOSURE.REG" and click OK.

Note: If you use the second option to expose enclosure, then use the

"Performance/Compatibility Settings" option to bring driver to Normal Mode using

"WHQL.REG" file.

Possible Values: 0-1 (0=do not expose enclosure, 1=expose enclosure)

Default Value: 0

----------------------------------------------------------------

8.2 Windows Specific Registry Parameters

NOTE: This setting applies to Windows Server 2003, Windows 2000, and Windows XP.

The only Windows-specific parameter that you can currently change is the

TimeOutValue. This registry option increases the timeout for all disk class

devices (in contrast to the driver-specific registry parameters that affect only

your HostRAID adapter).

The default TimeOutValue is 10 seconds. Follow these steps to increase this

value to 60 seconds:

1) Select Run from the Start button.

2) Browse to the folder containing above mentioned version of the HostRAID

driver, select the file "TIMEOUT.REG" and click OK.

Note: Changes made with the Registry Editor do not take effect until you reboot

your computer.

9. Linux Specific COMMAND LINE OPTIONS:

------------------------------------------

User options: Queue Depth setting per lun

Command line parameter passes in via insmod:

#insmod <ModuleName>.o hr_user_cmd_per_lun=<QueueDepthValue>

Example: #insmod adp3132.o hr_user_cmd_per_lun=48

Command line parameter setup permanently:

For 2.4 kernels

a) Edit /etc/modules.conf to add in "options <DriverName>

‘hr_user_cmd_per_lun=<QueueDepthValue’"

Example: options adp3132 ‘hr_user_cmd_per_lun=48’

b) Rebuild initrd then reboot.

For 2.6 kernels

a) Edit /etc/modprobe.conf to add in “options <DriverName>

‘hr_user_cmd_per_lun=<QueueDepthValue’"

Example: options adp3132 ‘hr_user_cmd_per_lun=48’

b) Rebuild initrd then reboot.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

This software contains the valuable trade secrets of Adaptec or its

licensors. The software is protected under international copyright

laws and treaties. This software may only be used in accordance with

the terms of its accompanying license agreement.

No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise, without prior

written consent of Adaptec, Inc.,

691 South Milpitas Blvd.,Milpitas, CA 95035

Other manuals for AAR-1220SA

This manual suits for next models

Table of contents

Other Adaptec Computer Hardware manuals

Adaptec

Adaptec 2410SA - Serial ATA RAID Controller User manual

Adaptec

Adaptec GDT6111RP User manual

Adaptec

Adaptec Series 6 Reference guide

Adaptec

Adaptec PM3332UW User manual

Adaptec

Adaptec RAID 5405Z User manual

Adaptec

Adaptec ACB-2010A User manual

Adaptec

Adaptec DuraStor 7200S User manual

Adaptec

Adaptec RAID 51245 How to use

Adaptec

Adaptec SBC-596 User manual

Adaptec

Adaptec RAID 2405Q User manual

Adaptec

Adaptec ASR-6805Q User manual

Adaptec

Adaptec 7210S Use and care manual

Adaptec

Adaptec SAS RAID Controllers User manual

Adaptec

Adaptec ASR-3085 Operating manual

Adaptec

Adaptec 2940U2W - Storage Controller U2W SCSI 80... User manual

Adaptec

Adaptec AUA-3100LP Manual

Adaptec

Adaptec AHA-1520 User manual

Adaptec

Adaptec 2045 User manual

Adaptec

Adaptec AAA-130SA SERIES Assembly Instructions

Adaptec

Adaptec AHA-1520 User manual

Adaptec

Adaptec ASA-7211C User manual

Adaptec

Adaptec ICP 5045BL User manual

Adaptec

Adaptec PM1564U3 User manual

Adaptec

Adaptec RAID 5085 User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual