ACTi SHM-100 User manual
Quick Installation Guide
SHM-100
Standalone System Health Management Server
V18.08.16
2 Quick Installation Guide
Thank you for purchasing ACTi Standalone System Health Management Server
(SHM). This guide contains all the information you need to quickly set up the
SHM system via local display interface.
The items below are required for installation:
• Monitor (with HDMI, DVI or DisplayPort input and the cable)
• USB mouse
• USB keyboard
• Network switch
• Network video recorder
This package includes the following items:
SHM Unit Power Adapter Socket Converters
SATA Cable Screws
UNPACK
1
BEFORE YOU START
Quick Installation Guide 3
REAR PANEL
1 2 3 4 5
6 7 9
1 Power Connector
2 DisplayPort
3 LAN Ports x 2
4 COM Port x 2
(for RS-232)
5 Audio Output
6 HDMI Port
7 USB 3.0 Ports x 4
8 DVI Connector
9 Audio Input
FRONT PANEL
1 Power Button
2 USB 3.0 Ports x 2
2
1
AT A GLANCE
2
8
4 Quick Installation Guide
The example below displays a local network consisting of an SHM server and
basic required peripherals to start using the device.
CONNECT THE DEVICE
3
Network
USB Devices
HDMI Monitor
Power Source
START UP
4
1. On the front panel, press the POWER BUTTON
to turn on the SHM.
NOTE: To assign a static IP address to the SHM, after entering
Windowsoperatingsystem,congurethenetworksettingsin
Windows Network and Sharing Center.
2. On the Windows log on screen, type “123456”
to enter the Windows system.
SHM
Network Video Recorders
Quick Installation Guide 5
OPEN FIREWALL OF NVR PORT
5
For security purposes, Windows Firewall is activated by default. In order to
connecttoaNetworkVideoRecorder(NVR)server,therewallmustbeopened
forthespecicNVRport.
1. Take note of the IP address and port number of
the NVR server that will be added to the SHM.
4. Select Inbound Rules > New Rule...
2. On Windows, search for “rewall”.
3. Select Windows Firewall with Advanced
Security.
5. Onthepop-up,selectthefollowingtoopentheportrewall.Thenclick
“Finish.”
“Port”
1
“TCP”
Type port
2
3
“Allow the connection”
4
Select all
5
Type Rule Name
6
7
6. The new rule will then be added to the Inbound Rule list.
6 Quick Installation Guide
1. On Windows desktop, double-click the System Health Management
icon to open the application interface.
2. Input the default account and password to log in.
6
LOGIN
Default Account and Password
Account: admin
Password: 123456
Understand the User Interface
Menu Options:
• Real-time Monitor: Shows the real-time status of the servers
• Real-time Monitor-eMap: Shows the device or server placement on the
e-map
• Event Search: Allows users to search and view the device status or event
lter
• Dashboard: View the graphical status of the servers on this page
• eMap Setting:PagetocongureeMap
• Location Setting:Pagetoconguretheserverlocation
• Server Conguration:Pagetocongureservers
Main Menu
Page
Toolbar
Language
Full Screen
Logout
Menu List
Minimize menu
Quick Installation Guide 7
7
ADD LOCATION
Beforeaddingtheserver,denerstthepossibleserverlocations.
1. On the left menu panel, click Location Setting, then click Add new
Location.
2. Type the preferred Location Name; this
willbeusedindeningthelocationof
servers.
3. Type the Address and click Search to
mark the location on the map.
Information such as Latitude and
Longitude are automatically updated
based on the map location.
4. Click Save.
Repeat the above steps to add more locations.
The location will be shown on the Location Setting page.
8 Quick Installation Guide
The Server Conguration page allows users to add the server(s) to be
monitored through the SHM device.
1. On the left menu panel, click Server Conguration, then click Add new
server.
8
ADD SERVER
2. Select the server location from the
Location Name list. This location must
beconguredrstintheLocationSetting
menu.
3. Type the server information.
4. Click Save.
Repeat the above steps to add more servers.
The server will be shown on the page.
Once a server is added, its event status will be shown on the Real-time Monitor
page.
Quick Installation Guide 9
SET eMAP
9
You can use the eMap feature to mark a camera or server to its location on the
map.ThesupportedimagelesarePNGandJPEG.
1. On the left panel, click eMap Setting, then click Choose.
2. UsingaUSBthumbdrive,searchanduploadtheeMaple.Theimage
appears on the lower part of the page.
3. Select the server to display the device list.
4. Drag the server or a camera to the map to mark its position.
Once an eMap is added, users can view the map on the
Real-time Monitor-eMap
page.
10 Quick Installation Guide
Monitoring can be done through the following pages:
Real-time Monitor
On the left menu panel, click Real-time Monitor to view the server status as
events happen in real-time.
Eventnoticationpop-up
Eventlist
Event Search
On the left menu panel, click Event Search if you want to view the event log
bylteringtheserver,oraparticulardeviceorbytheeventsthathappened.
Specifying date range can also narrow down the search.
Filluptolterthesearchresults
10
MONITOR STATUS
Table of contents
Other ACTi Server manuals
ACTi
ACTi PCS-100 User manual
ACTi
ACTi ENR-1000 User guide
ACTi
ACTi ACD-2100 User manual
ACTi
ACTi ACD-2000Q Instructions for use
ACTi
ACTi SED-2600 User manual
ACTi
ACTi Mobile Server User manual
ACTi
ACTi TCD-2500 Instructions for use
ACTi
ACTi CMS-100 User manual
ACTi
ACTi SED-2320Q User manual
ACTi
ACTi SED-2400 User manual
