ACTi ACM-7411 Series User manual
MegaPixel IP Outdoor Rugged Dome
(with DC 12V / PoE)
ACM-7411 series
Ver. 080415
Quick Installation Guide
0-1
0Getting Started
1.1 PACKAGE CONTENTS
ACM-7411 series Power Adaptor (Option)
(DC12V / PoE )
Product CD Terminal Blocks for Power, DI/O & Audio
Warranty Card Accessory
1
0-2
1.2 PHYSICAL DESCRIPTION
0-3
1. Ethernet Port
The IP device connects to the Ethernet via a standard RJ45
connector. Supporting NWAY, this IP device can auto detect the
speed of local network segment (10Base-T/100Base-TX
Ethernet).
2. Power Input
If your power input is DC12V. Please follow the description on the
connector to connect to power.
3. Power Input Audio & DIO input/output
PIN NAME DESCRIPTION
1 12V DC Power Input
2 GND Ground Pin
PIN NAME DESCRIPTION
1 DIO PW DC12VIN
2 DIO GND DGND
3 DO
DO1_TO_OUTSIDE
4 DI
DI1_FROM_OUTSIDE
5 AO_GND DGND
6 A_OUT
Audio_OUT_LR
7 AI_GND DGND
8 A_IN
Audio_IN
0-4
4. Reset Button
Step 1: Switch off IP device by disconnecting the power cable
Step 2: Press and continue to hold the Reset Button. Reconnect the
power cable while continuing to hold the reset button.
Step 3: Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory default
settings.
5. Conduit Hole
These conduit holes are used for cables to go through.
1.3 INSTALLATION PROCEDURE
There are three types of installation of this IP outdoor rugged dome series.
Surface mount Flush mount Wall mount
Pictures
Optional Bracket
required
●●
The mounting procedure can be divided into two parts,
1st: Connect the IP outdoor rugged dome series
2nd: Mount the IP outdoor rugged dome series
0-5
1.3.1 Connect the IP Outdoor Rugged Dome
1.3.1.1 Remove the cover
Remove the dome cover with special hex wrench in the accessory bag.
1.3.1.2 Insert the cabl
There are two conduit holes, one is at the dome bottom and the other one is
at the side of rugged dome with plug. Remove the plug if your cable will go
through the one at the side of rugged dome
0-6
1.3.1.3 Connect cables to connectors
Please follow the instruction at Chapter 2: Physical Description, for how to
connect to each connector.
1.3.1.4 LED Description
There are three LEDs in the system. They are indicators for power, fan and
heater respectively. According to operating temperature, the different LED
will be lighted for different situation.
0-7
1.4 Mount the IP Outdoor Fixed Dome (Surface)
0-8
1.5 Mount the IP Outdoor Fixed Dome (Flush)
0-9
1.6 Mount the IP Indoor Fixed Dome (Wall)
Other manuals for ACM-7411 Series
4
This manual suits for next models
1
Table of contents
Other ACTi Security Camera manuals
ACTi
ACTi ACM-1430 series User manual
ACTi
ACTi Outdoor Zoom Dome Series User manual
ACTi
ACTi A711 User manual
ACTi
ACTi D71 User manual
ACTi
ACTi A4 Series User manual
ACTi
ACTi B94A User manual
ACTi
ACTi D71 User manual
ACTi
ACTi KCM-5511 Instructions for use
ACTi
ACTi D55 Instructions for use
ACTi
ACTi TCM-7411 User manual
