ACME CA-DC6S User manual

DMX CONTROLLER

User Guide

Please read these instructions carefully before using

CONTENTS

1. Features.........................................................................................................3

2. General Instruction.........................................................................................4

3. Overview ........................................................................................................5

3.1 Front View.............................................................................................5

3.2 Rear View..............................................................................................6

4. Operation Guide.............................................................................................6

4.0 SCENE/MANUALButton………………………………………………..…6

4.1 Master Slider.........................................................................................6

4.2 Faders (1-6)..........................................................................................7

4.3 Flash Button (1-6).................................................................................7

4.4 Manual Mode........................................................................................7

4.5 Save Scenes.........................................................................................7

4.6 Run the Scenes ....................................................................................8

1. Features

CA-DC6S

1. 6 individual channel faders & one master fader

2. 6 DMX channels, 6 scenes programmable

3. Individual scene/channel FLASH button

4. Compact design & simple operation

CA-DC12S

1. 12 individual channel faders & one master fader

2. 12DMX channels, 6 scenes programmable

3. Individual scene/channel FLASH button

4. Compact design & simple operation

NOTE:

A knowledge of DMX is required to fully utilize this unit.

2. General Instruction

Please read the user manual carefully, as it includes important information regarding

details of operation, maintenance, and technical data. Keep this manual with the unit for

future consultation.

WARNINGS！

Avoid any inflammable liquids, water or metal objects entering the unit.

Should any liquid be spilled on the unit, DISCONNECT the power supply to the unit

immediately.

STOP using the unit immediately In the event of serious operation problems and

contact your local dealer for a check immediately.

DO NOT open the unit--there are no user serviceable parts inside.

NEVER try to repair the unit yourself. Repaired by unqualified people could cause

damage or malfunction.

CAUTIONS！

After removing the packing Make that the unit is NOT damaged in any way. If in doubt,

DON'T use it and contact an authorized dealer.

Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left

within children's reach, as it can be dangerous.

This unit must only be operated by adults. DO NOT allow children to tamper or play

with it.

NEVER use the unit under the following conditions:

In places subject to excessive humidity.

In places subject to vibrations or bumps.

In places with a temperature of over 45℃/113℉or less than 2℃/35.6℉.

Protect the unit from excessive dryness or humidity (ideal conditions are between 35%

and 80%).

DO NOT dismantle or modify the unit.

3. Overview

3.1 Front View

1. FADERS 1-6/1-12

Control Channel and scene output

2. FLASHS 1-6/1-12

Channel FLASH and scene FLASH function

3. MASTER SLIDER

Control all channel output

4. SCENE/MANUAL

Mode select

3.2 Rear View

1. POWER SWITCH

Turn on/off the power

2. POWER IN

DC 9-12V input

3. DMX Out

DMX-512 signal output

4. Operation Guide

4.0 SCENE/MANUAL button

LED indicator above the SCENE/MANUAL button light up, that

means you enter into the MANUAL mode, the Faders output the

values of 1-6/1-12 channels; When the LED indicator above the

SCENE/MANUAL button blinking that means you enter into the

SCENE mode, the Fader will output the saved SCENE.

4.1 Master Slider

Master slider can adjust the values of 1-6/1-12 channels, and it provides total control

towards overall DMX output. The position of the Master slider decides the Output

value of the scene.

4.2 Faders (1-6/1-12)

These 6/12 faders provide direct control over the

corresponding dimmers, and thus the intensity for any

connected luminaries.

4.3 Flash Button (1-6/1-12)

At the MANUAL mode, these 6/12 FLASH button can make the

corresponding output channel to its maximum. At the SCENE

mode, if the position of the corresponding FADER at its bottom,

the scenes can be open or shut up by pressing the

corresponding FLASH button. If you press the FLASH button

when there is output in the FADER, then it will make the scenes output to its max.

4.4 Manual Mode

Press the SCENE /MANUAL button, when the LED indicator

light up, that means you have entered into the manual mode.

At this time these 6/12 faders provide direct control over

the corresponding dimmers, and you can adjust the

intensity for any connected luminaries.

4.5 Save Scenes

Press the SCENE /MANUAL button, when

the LED indicator light up that means you

can program 6/12 scenes and store them

into each corresponding button. Use the

fader to adjust the effect you want to store, and then hold the SCENE /MANUAL

button at the same time press the FLASH button (1-6/1-12) which you want to

store. After you press the button, all the light will blink for three times, that means

you have stored the scenes successfully. Repeat the steps; you can save all the

6/12 scenes. (At the SCENE mode or hold the SCENE /MANUAL button the

corresponding LED indicator above the saved scenes will light up. If you save the

SCENES in case that all the FADERS are at their bottom, the before SCENES will

be deleted.)

4.6 Run the Scenes

Press the SCENE /MANUAL button till to

the LED indicator blinking to enter into the

SCENE mode, you can run the saved

scenes directly by the corresponding

Faders. At the SCENE mode, if the position of the corresponding FADER at its

bottom, the scenes can be open or shut up by pressing the corresponding FLASH

button.

Technical Specification

Power Input .................…………………………..…... DC 9-12V MIN.300mA

DMX Output .........................................……………..3 pin female XLR

Dimensions CA-DC6S...........………………....…….177 x 175 x 55mm

CA-DC12S...........………………....…… 307 x 175 x 55mm

Weight CA-DC6S ...................…................................. 0.8 kgs

CA-DC12S ...................…................................ 1.2 kgs

This manual suits for next models

Table of contents

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions