ACME XPerior 700WZA User manual
XPeriorTM 700WZA Wash
User Guide
Please read these instructions carefully before use
1A
XP-700WZA
2A
CONTENTS
1. Safety Instruction...................................................................................... 3
2. Installation................................................................................................. 5
3. Technical Specification ............................................................................ 6
4. Description ................................................................................................ 9
4.1 Description of the fixture...................................................................... 9
4.2 Control Panel....................................................................................... 9
5. Lamp ........................................................................................................ 10
6. How To Set The Unit ................................................................................11
6.1 Power On Display...............................................................................11
6.2 Main Function.................................................................................... 12
6.3. Home Position Adjustment ............................................................... 21
6.4. Error Information............................................................................... 23
7. Control By Universal DMX Controller ................................................... 23
7.1 Connection ........................................................................................ 24
7.2 Channel Mode Setting....................................................................... 25
7.3 Address Setting ................................................................................. 25
7.4 DMX 512 Configuration ..................................................................... 25
7.5 Lighting Library Download................................................................. 30
8. Update Software...................................................................................... 30
9. Troubleshooting...................................................................................... 30
10. Maintenance and Cleaning................................................................... 32
XP-700WZA
3A
1. Safety Instruction
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.
yUnpack and check carefully that there is no transportation damage before using the
unit.
yThe unit is for indoor use only. Use only in a dry location.
yDo install and operate by qualified operator.
yDo not allow children to operate the fixture.
yUse safety chain when fixing the unit. Handle the unit by carrying its base instead of
head only.
yThe unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces.
yBe sure that no ventilation slots are blocked, otherwise the unit will be overheated.
yBefore operating, ensure that the voltage and frequency of power supply matches the
power requirements of the unit.
yIt’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
yMaximum ambient temperature TA: 40 . Don’t operate it℃when the temperature is
higher.
yDon’t connect the device to any dimmer pack.
yDuring initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, and it will decrease gradually
within 15 minutes.
yMake sure there are no flammable materials close to the unit while operating to avoid
fire hazard.
yExamine the power wires carefully; replace them immediately if there is any damage.
yUnit’s surface temperature may reach up to 85 . Don’t touch the housing bare℃-handed
Please read carefully the instruction manual, which includes
important information about the installation, usage and maintenance.
XP-700WZA
4A
during its operation, and allow about 15 minutes for cooling the unit down before
replacing bulb or maintenance as it could be very hot.
yAvoid any inflammable liquids, water or metal objects entering the unit. Once it
happens, cut off the mains power immediately.
yDo not operate in dirty or dusty environment; do clean the fixture regularly.
yDo not touch any wire during operation as there might be a hazard of electric shock.
yAvoid power wires twist other cables.
yThe minimum distance between light output and the illuminated surface must be more
than 2.5 meters.
yDisconnect mains power before fuse/lamp replacement or servicing.
yReplace fuse/lamp only with the same type.
yIn the event of serious operating problem, stop using the unit immediately.
yNever turn on and off the unit time after time.
yThe housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
yDo not open the unit as there are no user serviceable parts inside.
yNever try to repair the unit by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical assistance
center if needed.
yDisconnect the mains power if the fixture is has not been used for a long time.
yDo use the original packing materials before transporting it once again.
Caution
yTo prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
yHot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.
yDo replace the bulb once it is damaged, deformed or life-expired.
yDo not look directly at the light while the bulb is on.
yNever touch bulb with bare fingers, as it is very hot after using.
yDo not start on the unit without bulb enclosure or when housing is damaged.
Product Items
yUser manual
y2 x Omega clamps
XP-700WZA
5A
2. Installation
Unpacking the fixture (for flight case pack only)
1. Stop the flight case via the brake sheet above the wheels.
2. Unlock the lock modules (1) and (2), open the cover board.
3. Prop the cover board with lid bracket and open the side
board.
4. Take out the fixture.
5. Unlock the lock module (3) take out omega clamps, safety
cable and gobo.
Installation:
1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the
holder.
2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock
fasteners (3) into the holes of the base and tighten fully clockwise.
3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the
safety cable (6) through the bottom of the base and over the support.
Fig.1 Fig.2
Attention:
yAlways ensure that the structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight without any harming
deformation.
yAlso always use a safety cable that can hold 12 times of the weight of the unit when
installing the fixture.
yMake absolute sure that the unit is firmly fixed in way that no vibrating or slipping would
XP-700WZA
6A
occur during operation.
yThe equipment must be installed beyond the areas where persons may walk by or be
seated.
yThe rigging has to be operated by or under the guide of a skilled person.
3. Technical Specification
Power supply
- AC 100V~240V 50/60Hz
Power Consumption
- 845W (230V)
- 877W (120V)
Fuse
- T 6.3A (for transformer)
-T 15A(for lamp)
Lamp
- Philips MSR Gold 700/2 FastFit
Battery backup display
- Setting DMX address or other functions without connecting to mains power.
-Battery for LCD display charges automatically when the fixtures connects to the mains
power.
- No need to change battery.
Wireless control (for the unit with wireless receiver built-in only)
- Wirelessly controlled by W-DMX (option).
- Each W-DMX is sending out 512 channels of DMX.
-License free band of 2.45 GHz
Optical system
- High efficiency optical system, delivering extremely powerful output
- High quality dichroic lenses
- Beam angle: 12°~45°
Movement
- Pan: 540°
- Tilt: 270°
XP-700WZA
7A
- Pan/Tilt moving speed adjustable.
- Automatic Pan/Tilt correction.
- Easy calibration and maintenance by magnetic home positioning.
- Pan/Tilt position lock for transporting protection.
Dimmer/Shutter
- Blackout, 0~100% smooth dimming, independent shutter and various strobe effect.
Color wheel
- Color wheel1: 7 dichroic colors + open.
- Color wheel2: 7 dichroic colors + open.
- Rainbow effect in both directions.
- Easy calibration and maintenance by magnetic home positioning.
CMY
- CMY speed adjustable.
-Optional multiple preset colors and macros available.
Zoom
- Motorized linear zoom for smooth adjustment of beam size and beam sharpness.
Cool
- Fan cooled
Protocols
- DMX 512
- Date input/output: 3/5 Pin XLR socket
Weight
- 35.5kgs
Dimension
- 525× 433×735 mm
Photometric diagram
XP-700WZA
8A
DMX Channels
Mode
Channel Mode 1
16-CH Mode 2
21-CH Mode 3
21-CH
1 Pan Shutter Pan
2 Pan Fine Dimmer Pan Fine
3 Tilt Cyan Tilt
4 Tilt Fine Magenta Tilt Fine
5 Pan/Tilt Speed Yellow Pan/Tilt Speed
6 Shutter 3200K(CTO) Function
7 Dimmer Color 1 Pan/Tilt Macro
8 Color 1 Color 2 Pan/Tilt Macro Speed
9 Color 2 Zoom Color 1
10 Cyan Preset Color Color 2
11 Magenta Color Macro 1 Cyan
12 Yellow Color Macro 2 Magenta
13 3200K (CTO) CMY/CTO Speed Yellow
14 Preset Color Pan/Tilt Macro 3200K(CTO)
15 Zoom Pan/Tilt Macro Speed Preset Color
16 Function Pan CMY/CTO Speed
17 Pan Fine Color Macro
18 Tilt Zoom
19 Tilt Fine Shutter
20 Pan/Tilt Speed Dimmer
21 Function Dimmer Fine
XP-700WZA
9A
4. Description
4.1 Description of the fixture
The head can be locked for transportation protection-the tilt lock button (4) is pressed and
the pan lock/unlock lever (6) is in lock position. To unlock the head, press the tilt unlock
button (5) and move the pan lock/unlock lever (6) to unlock position.
Caution: The head and arm must be unlocked before operation!
4.2 Control Panel
FrontView RearView
○
1 Monitor (Batter Back-up display):
○
2LED
POWER On Power on
DMX On DMX input present
1.Arm
2.Front panel
3.head
4.Tilt lock button (Black)
5.Tilt unlock button (Gray)
6.Pan lock
7.Handle
8.Base
9.Antenna (for XP-700WZA WT only)
Table of contents
Other ACME Floodlight manuals
ACME
ACME BARRAGE LED-247 User manual
ACME
ACME CM-108 RGB User manual
ACME
ACME TV PANEL200 User manual
ACME
ACME REFracted RLS 100 User manual
ACME
ACME LED-4TC User manual
ACME
ACME BW-545 User manual
ACME
ACME PAGEANT CM-600z User manual
ACME
ACME CB-348TC User manual
ACME
ACME LED-LP400 User manual
ACME
ACME TV PANEL100 User manual
ACME
ACME CP?64 BD15 User manual
ACME
ACME LED-ST2000 User manual
ACME
ACME LED-192RGB User manual
ACME
ACME LED-737 User manual
ACME
ACME DVS-2500 User manual
ACME
ACME theatre spot 150 TS-150 CW User manual
ACME
ACME MEGA STROBE 5000 User manual
ACME
ACME SUPER NOVA RGB User manual
ACME
ACME LP-900 User manual
ACME
ACME LED-7474 User manual
