Acer Smart Touch Kit User manual
1
Smart Touch Kit
USER MANUAL
2
Contents
Introduction and Features........................................................3
Hardware Installation.................................................................5
System Debugging.....................................................................8
Calibration Software................................................................13
Gesture recognition Introduction........................................21
Application Software...............................................................22
Troubleshooting........................................................................28
Important information............................................................. 29
Sales Feedback Form................................................................ 30
3
Introduction
Smart Touch Kit is the first product in the world that supports finger touch and is easy to carry
around. It can make any projector or LCD screen controllable by touch of the fingers. Compared with the
traditional Whiteboard, the key features of Smart Touch Kit are: easy portability and finger touch control;
sense any non-transparent objects in addition to fingers; no specified requirement for the display device,
make any flat surface interactive; no limit on the interactive area, sizes range from 40”-100’’; can work
with whiteboards, save and record both marker pen and finger writing on the same board.
Smart Touch Kit includes: Laser Emitter, Camera, Calibration Software, Whiteboard Software.
Laser Emitter Camera
Features
1. Support finger touch: Use fingers instead of pens to write or control;
2. Support Multi-touch: Ten People can write and erase simultaneously;
3. Minimum installation distance is 35cm: For example, if the size is 80 inch, then the installation
distance is around 100cm;
4. Portable and easy to install. Total weight is around 1.6kg. Just put the emitter above the projection
screen by double adhesive tape, and mount the Camera on the projector or ceiling. No need for
professional technicians.
5. Turn ordinary boards or walls into finger touch screens. Our product can turn any flat surface (like
boards, walls, LCDs) into finger touch screens; just fix the emitter above the projection screen.
6. Able to operate on any non-transparent objects. In the active area, any non-transparent object can be
used as a pen.
7. Convert normal LED screens into finger touch screens. Support active screen sizes ranging from
40-100inch. When using it, add one sheet of glass on the screen surface and fix the IWB hardware on the
glass to convert LED screen into a finger touch screen. Compared to the add-on infrared technology
solution, it has lower cost and there’s no need to customize. The cost will not increase with the screen
size.
4
Specifications
Smart Touch Kit
Calibration
Automatic (5s) / Manual (25/36 points)
Gesture Recognition
In Education Software: Write with single fingers, Erase with the palm, Two
fingers for movements, Two fingers away for zooming in and out, Stay for 2s
with the palm for opening spotlight, Double slap with the palm for going back to
the desktop.
In Windows: Max, Min windows, Zoom in or Zoom out or Rotate the picture,
One finger as a scroll bar, Display all the windows, Shift windows.
Multi-touch
Ten point touch, writing and erasing at the same time.
Latency
<30ms
Filter
Software auto-control that enhances stability.
Minimum Active Size
40 inches
Max Active Size
120 inches (rooms without sunlight); 100 inches(rooms with sunlight, different
throw ratios for different models)
Technology
Laser Image Calibration Technology
Positional Accuracy
±3 Pixel (Resolution: 4096*4096)
Aspect Ratio
4:3,16:9, 16:10
Projection ratio
Ultra-short throw:0.28, Short throw: 0.34, Long throw:1.34
Laser Beam
2
Wavelength of Laser
940nm
Power
5w
Power of Laser Beam
280mw*2
Power Requirements
3.3V/2A
Signal Refresh Rate
120fps
Connection
Camera connected to computer by USB cable; emitter just needs power;
the connection between emitter and camera is wireless by IR signal;
Weight
0.5kg
OS Requirement
Win7、win8、win8.1、win10
Software
Calibration software (driver) and GLBoard (education software)
Package
1. Camera
2. Emitter
3. Mounts
4. USB cable (12m*1)
5. Pionter Pen
6. Power Adapter
7. User Manual
5
Hardware Installation
Connection Topological graph:
Installation requirements
1. The display surface for installation should be flat. For a better touch performance, the flatter the
surface is, the easier the adjustment will be.
2. Take care of interference from sunlight when install it. We recommend using dark curtains for better
results.
3. The USB cable or adapter cable cannot be cut or spliced.
4. Before installing the projector, please leave 7cm between the top side of projection screen and the
inner frame of the whiteboard for emitter installation.
5. Before installing the emitter, please put one piece of 3M adhesive tape on the back side of emitter
body. Measure the central point of the top side of projection screen, paste and fix emitter 3cm above
the central point.(Note: the central point of emitter and the central point of projection screen should be
on the same straight line.)
6. Please secure emitter by 4 screws for long term use.
7. Mount camera on top of the projector, please fix camera firmly after adjusting the camera’s image in
correct position and leave no parts loose.
Sensor
Attach to the projector
USB
V
G
A
Emitter (3.3V,2A)
Size:3.5cm*17cm*2.4cm
6
Installation
Step 1: Emitter
Put an adhesive tape on the back side of the emitter, attach emitter 3cm above top center of the
projection screen, and secure the emitter by 4 screws (as shown in Pic).
Note: if it’s a Dual-Screen Smart Touch Kit, one emitter should be installed 3cm above the top of projection
screen on the left side of whiteboard, the other emitter should be installed 3cm above the top of projection
screen on the right side of whiteboard(red mark refers to the central point) (as shown in pic).
Emitter
emitter
emitter
7
Step 2: Camera
1st installation method (Bracket 1)：Install the camera on the top of projector by mounting component, fix the
camera firmly to prevent it from moving wobbly. Adjust the angle of camera to ensure that it can be detected by
the emitter (as shown in pic).
Note: If it is a Dual-Screen Smart Touch Kit, please install two cameras on two projectors respectively.
2nd installation method (Bracket 2)：
Fix the sensor to projector by using matched black supporting bracket, as following:
camera
8
First, fix the sensor to the black supporting bracket with the matched screw by screwdriver, as following:
At last, fix the supporting bracket to the projector with matched small screws, as following:
Step 3:Cable connection:
Connect the sensor with computer by using the USB cable. Emitter is connected to the power adapter.
Note:
1.Bracket 1 and bracket 2 are optional. Please kindly refer to actual packaging accessories.
2.if it is a Dual-Screen Smart Touch Kit, two sensors are connected to one computer by a USB cable
respectively.
System Debugging
Software installation
Step 1 :Our software support win7, win8, and win10 OS. Put the software CD into computer and start
the software by double click. Choose the language by prompt message, and select the throw ratio type
according to product model.
9
Step 2:Choose the installation path to continue it.
Step 3:Be patient to wait the installation for several minutes.
10
Step 4:After installation, the shortcut icon will be added to desktop.
After the installation of education software, the shortcut icon as picture will be added to desktop:
Software Uninstall
Uninstall software: Open the computer control panel, and click the “software and function” to choose and
uninstall it by right click. Restart your computer after uninstall.
Adjust the sensor
Chose “Installation and debugging”-“Mode 1”, then you can see the whole screen is projected
clearly (as shown in Pic).
***Adjust the camera’s position to make projection screen image show 60-80% of the software
interface.
Table of contents
Other Acer Projector Accessories manuals
