Accurist MB 119 User manual
Caseback markings
w
MB 119
CAL 0T10
SR927W
Accurist Watches Logo
Model Number
Calibre Number
Battery Number
Position A
Bottom Right (BR)Bottom Left (BL)
Dial C
(hour dial)
Dial B
(seconds dial)
Dial A
(minute dial)
Top Left (TL) Top Right (TR)
Position B Position C
OS60, OS10 & OT10 Operating Instructions
To set the time:
1. Gently pull out crown to position C.
2. Turn crown either way to correct time.
3. Push in crown to position A.
To set the date:
1. Gently pull out crown to position B.
2. Turn crown anti-clockwise to adjust date.
3. Push in crown to position A.
Using the chronograph:
1. Press BR Button to put the watch in Chronograph mode.
Making sure all sub dials are zeroed. If not, refer to ‘Chronograph Zero Reset’.
2. Press TR Button to start and stop the chronograph
OS60, OS10 & OT10 Operating Instructions continued . . .
3. Press BR Button to reset the chronograph
4. When you have finished with the Chronograph function, press BR Button
again; this re-starts the small second hand on Dial B.
Note: After 30 seconds the Second hand on Dial B will stop at the zero position,
however, the time is still continuing to be measured in seconds and when TR
Button is pressed to stop the timing, the second hands will automatically move
to show the time.
Chronograph zero set:
This procedure is only necessary when the battery is replaced, or when the
Chronograph hands do not return to the ‘0’ position, when the Chronograph
mode is selected.
1. Gently pull out crown to position C.
2. Push TR Button to advance the sweep second hand to the 12 0’clock position.
Please note each push of the TR Button will advance the hand 1 second.
Alternatively, depress and hold the Button for 2 seconds and the hand advances
continuously.
3. Push BR Button; this automatically re-sets sub dials. Each subsequent push
will advance the Second hand on sub dials by 1 marking. Alternatively, depress
and hold Button for 2 seconds; the hand will advance continuously until released.
4. Push in crown to Position A.
Position A
Bottom Right (BR)
Date indicator
Chronograph
Minute Hand
Chronograph
Second Hand
Top Right (TR)
Day indicator
Position B Position C
(The angle of this fanshaped
day indicator may vary from
model to model).
FS60 Operating Instructions
To set the time:
1. Gently pull out crown to position C.
2. Turn crown either way to correct time.
3. Push in crown to position A.
To set the date:
1. Gently pull out crown to position B.
2. Turn crown anti-clockwise to adjust date.
3. Push in crown to position A.
Note:
If the date is set between the hours of around 9.00pm and 1.00am, the date
may not change on the following day.
FS60 Operating Instructions continued . . .
To set the day:
1. Gently pull out the crown to position B.
2. Turn the crown anti-clockwise to adjust day.
3. Push in crown to position A
Note:
If the date is set between the hours of around 11.00pm and 2.00am, the date
may not change on the following day.
Using the chronograph:
1. Press TR Button to start and stop chronograph.
2. Press BR Button to reset the chronograph.
(the second and minute hands will return to the 12 o’clock (0) position)
Chronograph zero set:
This procedure is only necessary when the battery is replaced, or when the
Chronograph hands do not return to the 12 o’clock (0) position.
1. Gently pull out crown to position C.
2. Push TR Button to advance the sweep second hand to the 12 o’clock position.
Please note each push of the TR button will advance the hand 1 second.
Alternatively, depress and hold the button for 2 seconds and the hand advances
continuously.
3. Push in crown to position A.
Position A
Top Right (TR)
Bottom Right (BR)
Small second dial
2 hour dial
Chronograph
minute
counterhand
Position B Position C
Cal OS20 Operating Instructions
Other manuals for MB 119
1
Table of contents
Other Accurist Watch manuals
Accurist
Accurist MB916 Operating manual
Accurist
Accurist IA03 Manual
Accurist
Accurist IA04 Manual
Accurist
Accurist CR60, CP00 Operating manual
Accurist
Accurist 6W50 User manual
Accurist
Accurist IA04 Manual
Accurist
Accurist 6P20 User manual
Accurist
Accurist 7024474 Manual
Accurist
Accurist Calibre CP00 User manual
Accurist
Accurist Calibre CP00 Quick start guide
