Accurist Calibre CP00 User manual
Chronograph Watch Setting Instructions
Including CP00
Further information or instructions can be obtained
from the Accurist Helpline during office hours Monday to Friday.
Accurist Helpline
020 7447 3945
PURCHASED FROM
ONLEDOMESAHCRUPFOETAD
OWNERS NAME
ADDRESS
Perforation
Folding
Accurist Watches Limited
Asher House
Blackburn Road
West Hampstead
London, NW6 1AW
For latest information please check our website:
www.accurist.co.uk
Published Dec 2011
Telephone: +44 (0)20 7447 3900
Fax: +44 (0)20 7447 3949
Email: [email protected]
To register your Accurist watch, please go to www.accurist.co.uk/registration to
enter some basic information so you can keep abreast of the latest special offers
and product developments for Accurist Watches.
Registration
134
£10.00 / €12.50
For all other countries
1. Return the watch with payment to your nearest International service agent
(see page 25).
2. Enclose a cheque for €12.50. This charge covers handling, return packing,
postage via mail and insurance for loss or damage whilst being returned or
undergoing repairs.
No liability for loss or damage will be accepted without this remittance.
Perforation
Folding
2
Contents
How to use these instructions 3
CP00 Multi Function Operating Instructions 5
Using the Slide Rule Bezel 13
Care of your watch 14
Ceramic special Care Instructions (ceramic watches only) 18
WEEE Directive 20
Bracelet Adjustment 23
International Service Agents 25
Resistance to water 27
Accurist Quartz Guarantee 30
After Sales Service 32
Payment & Postage Instructions 33
3
How to use these instructions
This booklet contains setting instructions for the Accurist Quartz Chronograph series of
watches. Each section describes a particular calibre (also called watch movement)
which offers a unique set of functions and features. As such, it is necessary to identify
the correct calibre of your watch before proceeding to the appropriate section
(see diagram on next page).
Further information
The latest setting instructions, technical manuals and interactive instructions
are available from our website at www.accurist.co.uk
When on the Accurist website please click on the service area for more information.
The Accurist technical helpline is also available during office hours:
3
4
Caseback Markings
Model Number
Calibre Number
Battery Number
MB 836
JS.15
SR927W
5
24 Hour
Indicator
Dial
Mode Indicator dial
Bottom Right (BR)
Bottom Left (BL)
Top Left (TL) Top Right (TR)
KEY TO DIAGRAM
UTC dial - shows universal coordinated time (UTC)
in 24 hour format. UTC (or GMT) is the standard
from which all time zones are calculated.
24 hour dial - shows main hand time in 24 hour
format. This can be used to determine the correct
a.m. and p.m settings.
Mode indicator dial - shows main hand time in
24 hour format. This can be used to determine
the correct a.m and p.m. settings.
Mode indicator dial - shows the mode that the
watch is in - TME (time), CAL (calendar),
AL-1, 2 or 3 (alarm 1, 2 or 3), CHR (chronograph),
TMR (timer), SET (set).
Main digital display - shows the digital time,
calendar, alarms, chronograph or timer depending
on which mode chosen.
Button function displays - indicates the function
of each button at any moment, as shown in the
dia
g
ram o
pp
osite. >
Main
Digital
Display
UTC Dial
CP00 Operating Instructions
(Multi Function)
76
(see diagram on next page).
.
5
6
To set the time:
1. Push the bottom right hand button until the mode hand
indicator points to TME.
2. Press and hold the upper left button for three seconds. The hour and minute
hand will retract to the 12 O’clock position.
3. Select the time zone on the digital display by pressing the upper right button
or the lower left button.
4. Pull the bottom right button out one click. The bottom part of the digital
display will start flashing. Press the bottom left button to adjust for daylight
saving time.
5. Press the upper right button. You will see the seconds flashing on the lower
half of the digital display. Press the lower left button to reset the seconds to 00.
8
Top Left Button
Bottom Left Button
Top Right Button
Bottom Right Button
7
CP00 Operating Instructions continued . . .
To set the time zone
1. Setting the time zones allows you to add or remove cities on the digital
display or switch between daylight saving and standard time. Begin by pressing
the lower right button to move the mode hand indicator to SET mode on the
bottom dial.
2. If the hour or minute hands are obscuring the digital display, press and hold
the upper left button for three seconds. This will cause the hour and minute
hand to retract to the 12 O’clock position.
3. Now pull the lower right button out one click. You will see the digital display
flashing. Press the upper left button to select SET to display the city or OFF to
not display the city. Press the lower left button to turn summer time on or off.
Summer time is indicated on the lower part of the digital display. Daylight
savings time must be manually set for each city.
4. Pressing the upper right button will allow you to scroll through all the cities.
After setting, push the lower right button back in.
13
CP00 Operating Instructions continued . . .
To set the time zone
1. Setting the time zones allows you to add or remove cities on the digital
display or switch between daylight saving and standard time. Begin by pressing
the lower right button to move the mode hand indicator to SET mode on the
bottom dial.
2. If the hour or minute hands are obscuring the digital display, press and hold
the upper left button for three seconds. This will cause the hour and minute
hand to retract to the 12 O’clock position.
3. Now pull the lower right button out one click. You will see the digital display
flashing. Press the upper left button to select SET to display the city or OFF to
not display the city. Press the lower left button to turn summer time on or off.
Summer time is indicated on the lower part of the digital display. Daylight
savings time must be manually set for each city.
4. Pressing the upper right button will allow you to scroll through all the cities.
After setting, push the lower right button back in.
13
7
8
Troubleshooting
The analogue hands block the digital display.
1. Press and hold the upper left button for three seconds. The hour and minute hand
will retract to the 12 O’clock position allowing a clear view of the digital display.
2. Press the upper left button to return the analogue hands to the previous position.
The analogue time does not match the digital time for the selected zone.
1. Push the bottom right hand button until the mode indicator hand points to TME.
2. Select the time zone on the digital display by pressing the upper right button or the
lower left button.
3. Press the upper right and lower left buttons simultaneously and release. The hour
and minute hand will go to the time zone shown on the digital display. At this point
the digital display may go to UTC or another time zone. Press the upper right or lower
left button to scroll to the time zone you just set the analogue hands to.
14
9
CP00 Operating Instructions continued . . .
Troubleshooting continued . . .
The analogue hands are not precisely synchronised with the digital time.
1. Press the lower right button to move the mode indicator hand to CHR.
2. Pull the lower right button out one click. The hour, minute and UTC hands will
retract towards the straight up 12 O’clock position. You will see UTC on the top
half of the digital display.
3. Press the upper right button to advance the hands to the straight up 24-hour
position. Use the lower left button to go in reverse.
15
9
Other manuals for Calibre CP00
2
Table of contents
Other Accurist Watch manuals
Accurist
Accurist MB 119 User manual
Accurist
Accurist MB 119 User manual
Accurist
Accurist Watch User instructions
Accurist
Accurist IA04 Manual
Accurist
Accurist 7024474 Manual
Accurist
Accurist IA04 Manual
Accurist
Accurist 8N24 Operating manual
Accurist
Accurist 6W50 User manual
Accurist
Accurist MB916 Operating manual
Accurist
Accurist 6P20 User manual
