Accurist 7024474 Manual
Instruction Guide
and
2 year Guarantee
IA05A
Service and Repairs
Your ACCURIST watch is guaranteed against defects in materials and
workmanship for a period of 2 years from the date of purchase. During
this period, we will exchange or repair, at our discretion, any defective
components free of charge.
IMPORTANT - Not covered by Guarantee
1. Batteries, straps and bracelets.
2. Damage caused by accident, misuse or lack of care.
3. Water penetrations except in watches marked as “Water Resistant”.
SERVICING AND REPAIRS UNDER GUARANTEE
Please post your watch, together with the Retailer’s Sales Receipt
or proof of purchase, the completed Guarantee slip, and a brief note
to explain the nature of the fault, by Registered Post or Recorded
Delivery to the address shown. Do not send the presentation box as
this will NOT be returned.
SERVICING AND REPAIRS OUTSIDE OF GUARANTEE
Available at a reasonable charge after an estimate has been sent by
T.P. (UK) Ltd. Send your watch to us by Registered Post or Recorded
Delivery to the address shown.
Important Note
It is important to identify your watch correctly. If, after reading
this Instruction Guide, you have any further questions regarding
the use, operation or adjustment of your watch, please call us
during ofce hours on 0116 288 2500.
T.P. (UK) Ltd, Alexander House, Chartwell Drive, Wigston, Leicester
LE18 2EZ
United Kingdom.
Water Resistance
If your watch is water resistant, it will clearly state “Water Resistant” or
have a static water pressure indication (e.g. “30/50/100/200 metres”)
on the dial and/or case back.
If it is not marked as water resistant, it should not be allowed to come
into contact with water or be worn in conditions that could expose
it to moisture (e.g. washing, heavy rain etc.). Certain chemicals in
water may damage the watch seals. To maintain water resistance, we
recommend that your watch is serviced and re-sealed at least every
12 months by T.P. (UK) Ltd.
IMPORTANT
Buttons must not be operated while in contact with water.
WATER RESISTANT or RESISTANT TO 30 METRES
Suitable for normal everyday use and will resist exposure to splashes
and rain; it is NOT designed to be used whilst bathing or swimming.
WATER RESISTANT TO 50 METRES
As 30 metres plus bathing or swimming.
WATER RESISTANT TO 100 METRES
As 50 metres plus pool side diving and snorkelling, but not high board
or scuba diving.
WATER RESISTANT TO 200 METRES
As 100 metres plus scuba diving, but not high board diving.
Digital Instructions
Time/Date Settings
System Settings
A
B
D
C
A
B
D
C
A
B
D
C
A
B
D
C
Digital Instructions
Using the backlight feature
1. Press ‘A’ button to activate the backlight for 3 seconds.
System settings:
Using the night feature
1. Hold down ‘C’ button and press ‘B’ button to enter the system
settings mode.
2. Press ‘D’ button to select “NGT” on/off.
• When “NGT” is on, the backlight will activate when any button is
pressed.
Setting the time schedule
• Before setting the time, please check that the correct time schedule
is selected.
• To select the time time schedule, press the buttons in the following
sequence.
1. Hold down ‘C’ button and press ‘B’ to enter system settings mode.
2. Press ‘C’ to cycle through the time zones and press ‘D’ to select
either “STD” standard time or “DST” daylight saving time.
3. Press the ‘B’ button to conrm selection and return to real time
mode.
Digital Instructions
Setting the time
1. When in real time mode, hold down ‘B’ button to enter time
setting mode.
2. When the whole display is ashing, press the ‘D’ button to se-
lect the chime hourly function on/off, then press the ‘C’ button.
3. When the time zone display is ashing, press the ‘D’ button to
cycle through the time zones, then press the ‘C’ button.
4. When the seconds display is ashing, press the ‘D’ button to
reset to zero, then press the ‘C’ button.
5. When the minute display is ashing, press the ‘D’ button to
increase the value or hold the ‘D’ button to increase quickly,
then press the ‘C’ button.
6. When the hour display is ashing, repeat step 5. Pressing the
‘C’ button at this stage will enter the date setting display.
Setting the date
• Continuing on from setting the time, press the buttons in the
following sequence to set the date.
1. When the month display is ashing, press the ‘D’ button to
cycle through the values, then press the ‘C’ button.
2. When the day display is ashing, press the ‘D’ button to cycle
through the values, then press the ‘C’ button.
3. Repeat step 2 to select the year. Pressing the ‘C’ button at this
stage will enter the 24 hour setting display.
Selecting 12/24h format
• Continuing on from setting the date, when the display is ashing,
press the ‘D’ button to select either 12h or 24h format. To conrm
the time, date and 24h settings, press the ‘B’ button to return to
real time mode.
* Instructions continued overleaf
GUARANTEE
PLEASE USE BLOCK CAPITALS
NAME
ADDRESS
POST CODE
DAYTIME TELEPHONE NUMBER
IMPORTANT
This guarantee slip should be retained by the owner of
the product and should be sent to Timeproducts (UK) Ltd.
together with the product and £12 to cover the handling
and postage when service under Guarantee is required.
GUARANTEE
DATE OF PURCHASE:
Retailers stamp if required or full name and address:
Please attach the receipt or proof of purchase; failure to attach
these may invalidate this Guarantee.
This Guarantee does not affect your statutory rights.
IA05A/07-2017
Digital Instructions
Stopwatch Mode
Alarm Settings Mode
A
B
D
C
A
B
D
C
A
B
D
C
A
B
D
C
Digital Instructions
Setting the alarm feature
• To set the alarm, press the ‘B’ button repeatedly until the
alarm display is shown, then press the buttons in the following
sequence. Note: the watches covered in this manual have 3
individual alarms labelled AL 1, AL 2 and AL 3.
1. Press the ‘C’ button to cycle through and select the time zone.
2. Hold down ‘B’ button for 2 seconds to enter the alarm
settings mode.
3. Press the ‘D’ button to select alarm on/off, then press the
‘C’ button.
4. Press or hold down the ‘D’ button to set the hour value, then
press the ‘C’ button.
5. Repeat step 4 to set the minute value, then press the ‘B’
button to conrm the alarm settings.
• Each alarm can be set for different times in different time zones
independently.
Using the stopwatch feature
• To use the stopwatch feature, press the ‘B’ button repeatedly until
the stopwatch “CHR” display is shown, then press the buttons in
the following sequence. Note: the stopwatch measurement can
time up to 10 hours.
• Standard and accumulated elapsed time measurement
1. Press the ‘D’ button to start the counter, then press the ‘D’
button again to pause/stop.
2. To continue timing, press the ‘D’ button, then press the ‘D’
button again to pause/stop. This step can be repeated as
often as required.
3. Press the ‘C’ and ‘D’ buttons together to reset the counter
to zero.
Table of contents
Other Accurist Watch manuals
Accurist
Accurist Calibre CP00 Operating manual
Accurist
Accurist Watch User instructions
Accurist
Accurist 8N24 Operating manual
Accurist
Accurist MS612B Manual
Accurist
Accurist MB916 Operating manual
Accurist
Accurist CR60, CP00 Operating manual
Accurist
Accurist IA04 Manual
Accurist
Accurist Calibre CP00 Quick start guide
Accurist
Accurist IA03 Manual
Accurist
Accurist 6P20 User manual
