Abocom M73-APO07-300 User manual
- 1-
Wireless Router with 4-Port EtherSwitch
Quick Installation Guide for Windows 95/98/ME/NT/2000/XP
M73-APO07-300
Step 1: Cabling
Step 2: Configuration via Web
Step 3: Checking the Internet Connection
STEP 1: CABLING
•Power down your PC, Cable or DSL modem and this Wireless Router.
•Connect the included power -supply cable adapter to the power pack marked as 5V DC.
•Connect your broadband modem (i.e. cable/DSL modem) to the Internet port on the rear of
the Wireless Router.
•Connect a network cable from one of your PCs’ Ethernet ports to one of the Local (1 to 4)
ports on the rear of the Wireless Router.
•Both UTP Ethernet straight cable and cross-over cable are suitable for all WAN/LAN
connections, press the MDI/MDIX button for your case.
•Power on this device.
•Make sure these three LEDs (Power, Internet, Local) lit.
STEP 2: CONFIGURATION VIA WEB
1. Open your PC’s web browser and type http://192.168.1.254 in the browser’s Address box.
Press Enter.
2. No user name is required. The default password is left blank. Click OK to continue.
3. The opening screen contains settings for the Global (Internet connection) interface.
Click on the down arrow to select the desired Internet connection mode on the list.
Obtain configuration automatically
(CATV dynamic mode)
For users who are using Cable Modem
Internet service.
PPPoE (DSL dynamic mode) For users who are using xDSL Internet
- 2-
service that runs PPPoE. If your xDSL
service uses PPPoE, after installing the
Wireless router, do not run PPPoE
software on your computers.
Static configuration Select this item when the ISP assigns
static IP address for your account.
4. When finished, click Wireless in the left pane for Wireless LAN settings.
Wireless Configuration
SSID You have to assign an SSID for identification.
Channel No. You have to select a Channel No as the Channel ID for
identification too.
Basic Rate Set to 1,2 Mbps by default.
STEP 3: CHECKING THE INTERNET CONNECTION
•To see if the IP Sharing device is visible on the local network, go to Start ÆRun “PING
192.168.1.254”
•To check if this IP Sharing device is connected to the Internet, run “PING 168.95.192.1 – w
3000”.
•Run a web browser to surf the Internet.
Table of contents
Other Abocom Network Router manuals
Abocom
Abocom SW800RE User manual
Abocom
Abocom SW1600B User manual
Abocom
Abocom PLS322 User manual
Abocom
Abocom SW2400M User manual
Abocom
Abocom WR5205 User manual
Abocom
Abocom WR5502 User manual
Abocom
Abocom WR104 User manual
Abocom
Abocom AR3000 Advanced User manual
Abocom
Abocom SW1600R User manual
Abocom
Abocom AR3500 User manual
Abocom
Abocom ARM804 User manual
Abocom
Abocom PLS342 User manual
Abocom
Abocom PLC342 User manual
Abocom
Abocom ARM904 User manual
Abocom
Abocom Wireless Router FSM612 User manual
Abocom
Abocom SW800 User manual
Abocom
Abocom PLS485 User manual
Abocom
Abocom SW500A User manual
Abocom
Abocom PL1000 User manual
Abocom
Abocom WR5503U User manual
