ABB M2301 User manual

2TMD041600D0157 │10.12.2018

Product manual

ABB-Welcome

M2301 Mini system controller

Table of contents

Product manual

2TMD041600D0157

│

Table ofc ontents

1 Notes on the instruction manual.......................................................................................................................3

2 Safety.................................................................................................................................................................3

3 Intended use......................................................................................................................................................3

4 Environment ......................................................................................................................................................4

4.1 ABB devices ..........................................................................................................................................4

5 Product description ...........................................................................................................................................5

5.1 Control elements...................................................................................................................................5

6 Technical data...................................................................................................................................................6

7 Mounting/Installation.........................................................................................................................................7

7.1 Requirement for the electrician ............................................................................................................7

7.2 General installation instructions ...........................................................................................................8

7.3 Mounting................................................................................................................................................9

8 Operation.........................................................................................................................................................10

8.1 Operating modes.................................................................................................................................10

9 FCC..................................................................................................................................................................11

Notice .......................................................................................................................................................................12

Notes on the instruction manual

Product manual

2TMD041600D0157

│

1 Notes on the instruction manual

Please read through this manual carefully and observe the information it contains. This will

assist you in preventing injuries and damage to property, and ensure both reliable operation and

a long service life for the device.

Please keep this manual in a safe place.

If you pass the device on, also pass on this manual along with it.

ABB accepts no liability for any failure to observe the instructions in this manual.

2 Safety

Warning

Electric voltage!

Dangerous currents flow through the body when coming into direct or indirect

contact with live components.

This can result in electric shock, burns or even death.

– Disconnect the mains power supply prior to installation and/or disassembly!

– Permit work on the 110-240 V supply system to be performed only by

specialist staff!

3 Intended use

This device is an integral part of the ABB-Welcome door communication system and operates

exclusively with components from this system. The device must only be installed on mounting

rails according to DIN EN 500022.

Environment

Product manual

2TMD041600D0157

│

4 Environment

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with household

waste.

– The device contains valuable raw materials that can be recycled. Therefore,

dispose of the device at the appropriate collecting facility.

4.1 ABB devices

All packaging materials and devices from ABB bear the markings and test seals for proper

disposal. Always dispose of the packing materials and electric devices and their components via

an authorized collection facility or disposal company.

ABB products meet the legal requirements, in particular the laws governing electronic and

electrical devices and the REACH ordinance.

(EU-Directive 2012/19/EU WEEE and 2011/65/EG RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description

Product manual

2TMD041600D0157

│

5 Product description

5.1 Control elements

No. Functions

1Bus in/out

2Operating mode settings

See chapter "Operating modes" for details.

Operating status indicating LED

Ready for operation

Fault

4Power supply

100~240V

Technical data

Product manual

2TMD041600D0157

│

6 Technical data

Designation Value

Bus voltage 20-30 VDC

Operating temperature -25 °C…+55 °C

Storage temperature -40 °C…+70 °C

Single-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²

Fine-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm²

Protection IP 20

Size 4 U

Tab.1: Technical data

Mounting/Installation

Product manual

2TMD041600D0157

│

7 Mounting/Installation

Warning

Electric voltage!

Dangerous currents flow through the body when coming into direct or indirect

contact with live components.

This can result in electric shock, burns or even death.

– Disconnect the mains power supply prior to installation and/or disassembly!

– Permit work on the 110-240 V supply system to be performed only by

specialist staff!

7.1 Requirement for the electrician

Warning

Electric voltage!

Install the device only if you have the necessary electrical engineering

knowledge and experience.

– Incorrect installation endangers your life and that of the user of the electrical

system.

– Incorrect installation can cause serious damage to property, e.g. due to fire.

The minimum necessary expert knowledge and requirements for the installation

are as follows:

– Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect

2. Secure against being re-connected

3. Ensure there is no voltage

4. Connect to earth and short-circuit

5. Cover or barricade adjacent live parts.

– Use suitable personal protective clothing.

– Use only suitable tools and measuring devices.

– Check the type of supply network (TN system, IT system, TT system) to

secure the following power supply conditions (classic connection to ground,

protective grounding, necessary additional measures, etc.).

Mounting/Installation

Product manual

2TMD041600D0157

│

7.2 General installation instructions

■Terminate all branches of the wiring system via a connected bus device (e.g., indoor station,

outdoor station, system device).

■Do not install the system controller directly next to the bell transformer and other power

supplies (to avoid interference).

■Do not install the wires of the system bus together with 100-240 V wires.

■Do not use common cables for the connecting wires of the door openers and wires of the

system bus.

■Avoid bridges between different cable types.

■Use only two wires for the system bus in a four-core or multi-core cable.

■When looping, never install the incoming and outgoing bus inside the same cable.

■Never install the internal and external bus inside the same cable.

Mounting/Installation

Product manual

2TMD041600D0157

│

7.3 Mounting

The device must only be installed on mounting rails according to DIN EN 50022.

Operation

Product manual

2TMD041600D0157

│

8 Operation

8.1 Operating modes

“One on” mode

If there is an incoming call, all indoor stations in the same apartment ring together,

but only the master indoor station switches on the screen.

“All on” mode

If there is an incoming call, all indoor stations in the same apartment ring and switch

on screen at the same time.

Other manuals for M2301

Table of contents

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide