ABB Relion 615 series User manual

—

RELION® 615 SERIES

Motor Protection and Control

REM615 ANSI

Modbus Point List Manual

Document ID: 1MAC252756-MB

Issued: 2019-06-07

Revision: B

Product version: 5.0 FP1

This document and parts thereof must not be reproduced or copied without written

permission from ABB, and the contents thereof must not be imparted to a third party, nor

used for any unauthorized purpose.

The software or hardware described in this document is furnished under a license and may

be used, copied, or disclosed only in accordance with the terms of such license.

Trademarks

ABB and Relion are registered trademarks of the ABB Group. All other brand or product

names mentioned in this document may be trademarks or registered trademarks of their

respective holders.

Warranty

Please inquire about the terms of warranty from your nearest ABB representative.

www.abb.com/mediumvoltage

www.abb.com/substationautomation

Disclaimer

The data, examples and diagrams in this manual are included solely for the concept or

product description and are not to be deemed as a statement of guaranteed properties. All

persons responsible for applying the equipment addressed in this manual must satisfy

themselves that each intended application is suitable and acceptable, including that any

applicable safety or other operational requirements are complied with. In particular, any

risks in applications where a system failure and/or product failure would create a risk for

harm to property or persons (including but not limited to personal injuries or death) shall

be the sole responsibility of the person or entity applying the equipment, and those so

responsible are hereby requested to ensure that all measures are taken to exclude or

mitigate such risks.

This product has been designed to be connected and communicate data and information

via a network interface which should be connected to a secure network. It is the sole

responsibility of the person or entity responsible for network administration to ensure a

secure connection to the network and to take the necessary measures (such as, but not

limited to, installation of firewalls, application of authentication measures, encryption of

data, installation of anti virus programs, etc.) to protect the product and the network, its

system and interface included, against any kind of security breaches, unauthorized access,

interference, intrusion, leakage and/or theft of data or information. ABB is not liable for

any such damages and/or losses.

This document has been carefully checked by ABB but deviations cannot be completely

ruled out. In case any errors are detected, the reader is kindly requested to notify the

manufacturer. Other than under explicit contractual commitments, in no event shall ABB

be responsible or liable for any loss or damage resulting from the use of this manual or the

application of the equipment.

Conformity

This product complies with the directive of the Council of the European Communities on

the approximation of the laws of the Member States relating to electromagnetic

compatibility (EMC Directive 2014/30/EU) and concerning electrical equipment for use

within specified voltage limits (Low-voltage directive 2014/35/EU). This conformity is

the result of tests conducted by ABB in accordance with the product standards EN 50263

and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and

EN 60255-27 for the low voltage directive. The product is designed in accordance with the

international standards of the IEC 60255 series and ANSI C37.90. This product complies

with the UL 508 certification.

Table of contents

Section 1 Introduction............................................................................9

This manual.............................................................................................. 9

Intended audience.................................................................................... 9

Product documentation...........................................................................10

Product documentation set................................................................10

Document revision history................................................................. 10

Related documentation......................................................................11

Symbols and conventions.......................................................................11

Symbols.............................................................................................11

Document conventions...................................................................... 11

Functions, codes and symbols.......................................................... 12

Section 2 Modbus data mappings....................................................... 17

Overview.................................................................................................17

Supported functions................................................................................17

Supported functions in REM615........................................................17

Indications...............................................................................................20

Premapped indications...................................................................... 21

Common data 1............................................................................ 21

CTRL.CBCILO1 Circuit breaker enable signals (1)...................... 21

CTRL.CBCSWI1 Circuit breaker (1) mom. position......................21

CTRL.CBCSWI1 Circuit breaker (1) mom+mcd position..............22

CTRL.CBXCBR1 Circuit-breaker control (1) – 52-1..................... 22

CTRL.DCSXSWI1 Disconnector position indication (1) – 52-

TOC.............................................................................................. 22

CTRL.DCSXSWI2 Disconnector position indication (2) –

29DS-1......................................................................................... 23

CTRL.DCSXSWI3 Disconnector position indication (3) –

29DS-2......................................................................................... 23

CTRL.DCXSWI1 Disconnector control (1) – 29DS-1....................23

CTRL.DCXSWI2 Disconnector control (2) – 29DS-2....................24

CTRL.ESSXSWI1 Grounding switch indication (1) – 29GS-1...... 24

CTRL.ESSXSWI2 Grounding switch indication (2) – 29GS-2...... 24

CTRL.ESXSWI1 Grounding switch control (1) – 29GS-1............. 25

LD0.ARCSARC1 Arc protection (1) – AFD-1................................25

LD0.ARCSARC2 Arc protection (2) – AFD-2................................26

Table of contents

REM615 ANSI 1

Point List Manual

LD0.ARCSARC3 Arc protection (3) – AFD-3................................26

LD0.CCBRBRF1 Circuit breaker failure protection (1) – 50BF-1..26

LD0.CCSPVC1 Current circuit supervision (1) – CCM-1..............27

LD0.CMMXU1 Three-phase current measurement (1) – IA,

IB, IC.............................................................................................27

LD0.DEFLPDEF1 Directional ground-fault protection, low

stage (1) – 67/51N-1.....................................................................27

LD0.DOPPDPR1 Reverse power/directional overpower

protection (1) – 32O-1...................................................................28

LD0.DOPPDPR2 Reverse power/directional overpower

protection (2) – 32O-2...................................................................28

LD0.DOPPDPR3 Reverse power/directional overpower

protection (3)................................................................................ 28

LD0.DUPPDPR1 Underpower protection (1) – 32U-1.................. 29

LD0.DUPPDPR2 Underpower protection (2) – 32U-2.................. 29

LD0.EFHPTOC1 Non-directional ground-fault protection,

high stage (1) – 50G-1..................................................................29

LD0.EFHPTOC2 Non-directional ground-fault protection,

high stage (2) – 50G-2..................................................................30

LD0.EFLPTOC1 Non-directional ground-fault protection low

stage (1) – 51G-1..........................................................................30

LD0.ESMGAPC1 Emergency start-up (1) – 62EST-1.................. 30

LD0.FRPFRQ1 Frequency protection (1) – 81-1.......................... 30

LD0.FRPFRQ2 Frequency protection (2) – 81-2.......................... 31

LD0.HIAPDIF1 High-impedance differential protection for

phase A (1)................................................................................... 31

LD0.HIBPDIF1 High-impedance differential protection for

phase B (1) – 87B-1......................................................................32

LD0.HICPDIF1 High-impedance differential protection for

phase C (1) – 87C-1..................................................................... 32

LD0.JAMPTOC1 Motor load jam protection (1) – 51LR-1............ 32

LD0.JAMPTOC2 Motor load jam protection (2) – 51LR-2............ 32

LD0.LEDGGIO1 Indication LED states Color1/Color2 – LED.......33

LD0.LEDGGIO1 Indication LED states OFF/ColorX – LED..........34

LD0.LEDPTRC1 Global conditioning (1)...................................... 35

LD0.LEDPTRC1 Global conditioning - phase information (1)...... 35

LD0.LOFLPTUC1 Loss of load supervision (1) – 37M-1.............. 36

LD0.LOFLPTUC2 Loss of load supervision (2) – 37M-2.............. 36

LD0.MAPGAPC1 Multipurpose protection (1) – MAP-1............... 36

LD0.MAPGAPC2 Multipurpose protection (2) – MAP-2............... 37

LD0.MAPGAPC3 Multipurpose protection (3) – MAP-3............... 37

Table of contents

2REM615 ANSI

Point List Manual

LD0.MAPGAPC4 Multipurpose protection (4) – MAP-4............... 37

LD0.MAPGAPC5 Multipurpose protection (5) – MAP-5............... 38

LD0.MAPGAPC6 Multipurpose protection (6) – MAP-6............... 38

LD0.MDSOPT1 Runtime counter for machines and devices

(1) – OPTM-1................................................................................38

LD0.MNSPTOC1 Negative-sequence overcurrent protection

for machines (1) – 46M-1..............................................................39

LD0.MNSPTOC2 Negative-sequence overcurrent protection

for machines (2) – 46M-2..............................................................39

LD0.MPTTR1 Thermal overload protection for motors (1) –

49M-1........................................................................................... 39

LD0.MVGAPC1 Move (8 pcs) (1) – MV-1.....................................40

LD0.MVGAPC2 Move (8 pcs) (2) – MV-2.....................................40

LD0.NSPTOV1 Negative-sequence overvoltage protection

(1) – 47-1...................................................................................... 41

LD0.NSPTOV2 Negative-sequence overvoltage protection

(2) – 47-2...................................................................................... 41

LD0.OEPVPH1 Overexcitation protection (1) – 24-1....................42

LD0.OEPVPH2 Overexcitation protection (2) – 24-2....................42

LD0.PHHPTOC1 Three-phase non-directional overcurrent

protection, high stage (1) – 50P-1................................................ 42

LD0.PHHPTOC2 Three-phase non-directional overcurrent

protection, high stage (2) – 50P-2................................................ 43

LD0.PHIPTOC1 Three-phase non-directional overcurrent

protection, instantaneous stage (1) – 50P-3.................................43

LD0.PHLPTOC1 Three-phase non-directional overcurrent

protection, low stage (1) – 51P-1..................................................44

LD0.PHPTOV1 Three-phase overvoltage protection (1) – 59-1... 44

LD0.PHPTOV2 Three-phase overvoltage protection (2) – 59-2... 45

LD0.PHPTUV1 Three-phase undervoltage protection (1) – 27-1. 45

LD0.PHPTUV2 Three-phase undervoltage protection (2) – 27-2. 46

LD0.PREVPTOC1 Phase reversal protection (1) – 46R-1........... 46

LD0.PSPTUV1 Positive-sequence undervoltage protection

(1) – 27PS.....................................................................................46

LD0.RESCMMXU1 Residual current measurement (1) – IG-1.....47

LD0.RESVMMXU1 Residual voltage measurement (1) – VG-1... 47

LD0.ROVPTOV1 Residual overvoltage protection (1) – 59G-1....47

LD0.ROVPTOV2 Residual overvoltage protection (2) – 59N-1.... 48

LD0.SEQSPVC1 Fuse failure protection (1) – 60-1......................48

LD0.SPCGAPC2 Generic control point (16 pcs) (2) – SPC-2...... 48

Table of contents

REM615 ANSI 3

Point List Manual

LD0.SSCBR1 Circuit-breaker condition monitoring (1) –

52CM-1.........................................................................................49

LD0.STTPMSU1 Motor start-up supervision (1) – 66/51LRS-1....50

LD0.TCSSCBR1 Trip circuit supervision (1) – TCM-1..................50

LD0.TCSSCBR2 Trip circuit supervision (2) – TCM-2..................50

LD0.TRPPTRC1 Master trip (1) – 86/94-1....................................51

LD0.TRPPTRC2 Master trip (2) – 86/94-2....................................51

LD0.VMMXU1 Three-phase voltage measurement (1) – VA,

VB, VC..........................................................................................51

LD0.XAGGIO130 Physical I/O states (AIM card XA130)............. 52

LD0.XBGGIO110 Physical I/O states (BIO card XB110)..............52

LD0.XGGIO100 Physical I/O states (PSM card X100).................53

LD0.XGGIO110 Physical I/O states (BIO card X110).................. 54

LD0.XGGIO120 Physical I/O states (AIM card X120).................. 55

LD0.XGGIO130 Physical I/O states (BIO card X130) ................. 56

LD0.XRGGIO130 Alarm/warning..................................................57

Unmapped indications....................................................................... 57

All premapped three-phase protection function stages, trip/

phase-dependent objects added.................................................. 57

Common data 2............................................................................ 57

LD0.DIAGLCCH1 Ethernet supervision (1).................................. 58

LD0.IL1TCTR1 Three-phase CT supervision (1)..........................58

LD0.LDPRLRC1 Load profile record (1) – LoadProf.................... 59

LD0.MAPGAPC7 Multipurpose protection (7) – MAP-7............... 59

LD0.MAPGAPC8 Multipurpose protection (8) – MAP-8............... 59

LD0.MAPGAPC9 Multipurpose protection (9) – MAP-9............... 60

LD0.MAPGAPC10 Multipurpose protection (10) – MAP-10......... 60

LD0.MAPGAPC11 Multipurpose protection (11) – MAP-11......... 60

LD0.MAPGAPC12 Multipurpose protection (12) – MAP-12......... 61

LD0.MAPGAPC13 Multipurpose protection (13) – MAP-13......... 61

LD0.MAPGAPC14 Multipurpose protection (14) – MAP-14......... 61

LD0.MAPGAPC15 Multipurpose protection (15) – MAP-15......... 62

LD0.MAPGAPC16 Multipurpose protection (16) – MAP-16......... 62

LD0.MAPGAPC17 Multipurpose protection (17) – MAP-17......... 62

LD0.MAPGAPC18 Multipurpose protection (18) – MAP-18......... 63

LD0.MSVPR1 Three-phase remnant undervoltage protection

(1) – 27R-1....................................................................................63

LD0.MSVPR2 Three-phase remnant undervoltage protection

(2) – 27R-2....................................................................................63

LD0.RESTCTR1 IG CT supervision (1)........................................63

LD0.RESTVTR1 VG VT supervision (1).......................................64

Table of contents

4REM615 ANSI

Point List Manual

Other manuals for Relion 615 series

This manual suits for next models

Table of contents

Other ABB Control Unit manuals

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual