ABB ACH550 series User manual

ACH550

Installation Manual

BACnet/IP Router Module

RBIP-01

RBIP-01 Router and ACH550 Drive manuals

BACnet® is a registered trademark of ASHRAE.

RBIP-01 BACnet/IP ROUTER

MANUALS PROTOCOL MANUALS

RBIP-01 BACnet/IP Router Module

Installation Manual

3AUA0000040168 (English)

BACnet® Protocol

ACH550 AC Drives

3AUA0000004591 (English)

RBIP-01 BACnet/IP Router Module

User’s Manual

3AUA0000040159 (English)

–Safety

– Introduction to BACnet routing

– User interface

Embedded Fieldbus (EFB) Control

3AFE68320658 (English)

ACH550 MANUALS HVAC Info Guide CD

ACH550-01 User's Manual

3AFE68258537 (English)

ACH550-02 User's Manual

3AFE68262674 (English)

ACH550-UH User's Manual

3AUA0000004092 (English)

–Safety

– Installation

– Start-up

– Diagnostics

– Maintenance

– Technical data

E-Clipse Bypass Configurations

(BCR, BDR, VCR, or VDR) for

ACH550 Drives (1...400 HP)

User’s Manual

3AUA00000016461 (English)

3AFE68338743 (English)

Detailed product description

– Technical product description

including dimensional drawings

– Cabinet mounting information

including power losses

– Software and control

– User interfaces and control

connections

– Complete options descriptions

– Spare parts

Practical engineering guides

– PID & PFA engineering guides

– Dimensioning and sizing guidelines

– Diagnostics and maintenance

information

–Etc.

BACnet/IP Router Module

RBIP-01

Installation Manual

3AUA0000040168 Rev B

EFFECTIVE: 2010-02-25

Safety instructions

Overview This chapter states the general safety instructions that must be

followed when installing and operating the RBIP-01 BACnet/IP

Router Module.

The material in this chapter must be studied before attempting any

work on, or with, the unit.

In addition to the safety instructions given below, read the

complete safety instructions of the specific drive you are working

on.

General safety instructions

WARNING! All electrical installation and maintenance work on the

drive should be carried out by qualified electricians. The drive and

adjoining equipment must be properly earthed.

Do not attempt any work on a powered drive. After switching off

the mains, always allow the intermediate circuit capacitors to

discharge for 5 minutes before working on the frequency

converter, the motor or the motor cable. It is good practice to

check (with a voltage indicating instrument) that the drive is in fact

discharged before beginning work.

The motor cable terminals of the drive are at a dangerously high

voltage when mains power is applied, regardless of motor

operation.

There can be dangerous voltages inside the drive from external

control circuits even when the drive mains power is shut off.

Exercise appropriate care when working on the unit. Neglecting

these instructions can cause physical injury or death.

Safety instructions

Table of contents

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Introduction to this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

What this manual contains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Router placement in the MS/TP network . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Router module configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Delivery check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation of the module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

RBIP-01 BACnet/IP Router Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

MS/TP cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Crossover network cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Accessory parts bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Installing the router module to the ACH550 drive . . . . . . . . . . . . . . . . . . . . . 16

Installing the router module to the ACH550 drive with the E-Clipse

Bypass option (US only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Operation and reset of the module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Table of contents

Resetting the module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

LED indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Commissioning and configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the internal DHCP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using a manually assigned IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Checking the connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Logging into the web server of the router module . . . . . . . . . . . . . . . . . . . . . 32

User right levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Supported browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

RBIP-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Connection examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Product and service inquiries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Product training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Providing feedback on ABB Drives manuals . . . . . . . . . . . . . . . . . . . . . . . . 41

Document library on the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Introduction to this manual

Intended audience

The manual is intended for the people who are responsible for

installing an RBIP-01 BACnet/IP Router Module. The reader is

expected to have basic knowledge of electrical fundamentals,

Building Automation and Control networks (BACnet), electrical

wiring practices and operating the drive.

Before you start

It is assumed that the drive is installed and ready to operate before

starting the installation of the module.

In addition to conventional installation tools, have the drive

manuals available during the installation as they contain important

information not included in this manual. The drive manuals are

referred to at various points of this document.

What this manual contains

This manual contains information on the wiring and installation of

the router module.

Overview The RBIP-01 BACnet/IP Router Module is a BACnet router. It is a

snap-on module, fitted inside the drive and fully compatible with all

ABB ACH550 standard drives for HVAC including older ACH550

product generations.

For more information, see RBIP-01 Router and ACH550 Drive

manuals. By default, the documents are stored in electronic format

in the router module. Note that the admin user has the right to

upload or remove the documents stored in the web server.

Introduction to this manual

Router placement in the MS/TP network

In this manual, it is assumed and recommended that you place the

router module in an ACH550 device located at one end of the MS/

TP network.

The wiring starts with the ACH550 drive (the first end of the

segment), continues in the drive to the router module and then to

the next stations on the MS/TP segment.

Note: Tconnections are not allowed in MS/TP.

For more information, see RBIP-01 Router and ACH550 Drive

manuals. By default, the documents are stored in electronic format

in the router module’s web server. The cover page of ACH550

BACnet Protocol Manual (3AUA0000004591 [English]) shows a

connection example of ACH550 drives in BACnet. See also

Connection examples on page 37.

Router module configuration

The RBIP-01 BACnet/IP Router Module provides an integrated

web server for easy configuration. This installation manual

describes all necessary steps to access the web server.

ACH550

RBIP-01 ACH550 ACH550 ACH550 ACH550

Other manuals for ACH550 series

Table of contents

Other ABB Control Unit manuals

ABB

ABB REF 542plus User manual

ABB

ABB FAIO-01 User manual

ABB

ABB FCAN-01 Installation manual

ABB

ABB SmissLine TP ZLS 260 User guide

ABB

ABB NCSA-01 CS 31 Installation manual

ABB

ABB Ability 800xA Series User manual

ABB

ABB FEPL-02 Ethernet POWERLINK Installation manual

ABB

ABB ControlNet FCNA-01 Installation manual

ABB

ABB Relion 630 Series User manual

ABB

ABB ACH580-34 Installation manual

ABB

ABB Relion 670 series Quick start guide

ABB

ABB REC 523 Product manual

ABB

ABB ACH550 series User manual

ABB

ABB Arc Guard System TVOC-2 Product manual

ABB

ABB Relion 615 series User manual

ABB

ABB ACS880-204 User manual

ABB

ABB A3 Series User manual

ABB

ABB 88TK50-E/R1210 User guide

ABB

ABB RDCO-01 User manual

ABB

ABB ACQ810 Use and care manual

ABB

ABB MotiFlex e100 OPT-MF-005 User manual

ABB

ABB UCU-22 User manual

ABB

ABB HD5-B-901 User manual

ABB

ABB ACL30-04 Series Troubleshooting guide

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual