ABB FBIP-21 BACnet/IP Installation manual
Options for ABB drives, converters and inverters
Quick installation and start-up guide
FBIP-21 BACnet/IP adapter module
Safety instructions
WARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to the
equipment can occur. See the user’s manual.
Mechanical installation
Electrical installation
Layout of the module
1. Pull out the lock.
2. Install the module carefully to an option
module slot of the drive. See the drive
hardware manual.
3. Push in the lock.
4. Tighten the screw to torque 0.8 N·m using
a Torx TX10 screwdriver.
WARNING! Do not use excessive force,
or leave the screw too loose. Over-
tightening can damage the screw or
module. A loose screw decreases the EMC
performance, and can even cause an operation
failure.
13
4
No. Description
1Lock
2 Mounting and grounding screw
3 RJ-45 connector [X1] to Ethernet
4 RJ-45 connector [X2] for chaining another module
5 Diagnostic LEDs
6 MAC ID
5
3
2
4
1
6
Start-up
When the module is connected to the drive, the drive control program sets the applicable parameters.
See the appropriate drive manual.
Basic parameter settings
To take the settings into use, validate and refresh the parameters with parameter 51.27 FBA par refresh.
Further information
Index Name Value
20.01 Ext1 commands Fieldbus A
22.11 Speed ref1 source FBA A ref 1
28.11 Frequency ref1 source FBA A ref 1
50.01 FBA A enable Enable (or select the option slot in which the module is installed).
This activates the communication module. The HOST LED becomes green.
50.02 FBA A comm loss func Fault
51.04 IP configuration Set the IP address according your network configuration.
51.05...08 IP address
51.09 Subnet CIDR
51.14 Device obj ID lo Set a unique device object instance value for BACnet devices.
51.15 Device obj ID hi
See the latest version of FBIP-21 BACnet/IP adapter
module user's manual (3AXD50000028468 [English]) in
ABB library (www.abb.com/drives/documents).
For more information on fieldbus options and protocols
provided by ABB Drives, see the fieldbus
communications web page
(new.abb.com/drives/connectivity/fieldbus-connectivity).
3AXD50000158171 Rev A (EN) 2017-11-23
FBIP-21 manual
Fieldbus communications web page
Other manuals for FBIP-21 BACnet/IP
3
Table of contents
Other ABB Adapter manuals
ABB
ABB FENA-01 User manual
ABB
ABB SWISSLINE TP User guide
ABB
ABB FMBT-21 User manual
ABB
ABB WBCA Series User manual
ABB
ABB Busch-AudioWorld Busch-iDock 8218 U-500 User manual
ABB
ABB FENA-01 User manual
ABB
ABB MTQ22-FBP User manual
ABB
ABB SPA-ZC 402 User manual
ABB
ABB RETA-01 User manual
ABB
ABB FENA-21 Installation manual
ABB
ABB Tina 3A/Aps User manual
ABB
ABB RDNA-01 User manual
ABB
ABB SPA-ZC 400 Guide
ABB
ABB Tina 10B User manual
ABB
ABB RS485 Modbus adapter User manual
ABB
ABB SREA-01 User manual
ABB
ABB RECA-01 User manual
ABB
ABB NIBA-01 Installation manual
ABB
ABB FEIP-21 Installation manual
ABB
ABB FBIP-21 BACnet/IP User manual
