4xem W35 User manual
1
Before You Use
It is important to carefully examine the contents with the Chapter Package Contents
after opening the package. If there is anything missing, contact your reseller. Read the
Chapter Physical Description before assembling and operating the device and
peripherals. Understanding the physical description can prevent damage caused by
abnormal usage and reduce most problems during installation.
Basically Network Camera is a network device and should be easy to use for those who
already have basic network knowledge. If there is a system error and it does not recover
easily due to erroneous configuration, read the System recovery section in Appendix
Troubleshooting to restore factory default settings and perform installation again.
Network Camera has been designed for various environments and can be used to build
various applications for general security or demonstration purposes. For standard
applications, find the appropriate section in the Chapter How to Use for your application
and follow the steps to setup the system. To make best use of Network Camera, read
Chapter Advanced Functions to get creative ideas and review Chapter System
Configuration for detailed explanations of system configurations. To those professional
developers, the Appendix URL Commands of Network Camera will be a very helpful
reference to develop a Web-based application.
Surveillance devices may be prohibited by law in your country. Though Network Camera
is not only a high performance surveillance system but also a networked video server,
ensure that the operations of such devices are legal before installing this unit for
surveillance.
Those paragraphs preceding with must be fully understood and cautioned.
Ignoring the warnings may result in serious hazards.
2
Table of Contents
Before You Use.......................................................1
Table of Contents ...................................................2
Package Contents...................................................4
Features and Benefits.............................................5
Physical Description ...............................................7
Front Panel ......................................................................7
Rear Panel .......................................................................8
How to Install ......................................................10
Ethernet Environment......................................................11
How to Use...........................................................16
Authentication................................................................16
Installing Plug-in.............................................................17
Main Page......................................................................18
System Configuration...........................................21
Introduction...................................................................21
Setup Wizard..............................................................22
Application Wizard.......................................................22
Definitions of Configuration ..............................................23
Advanced Functions .............................................32
Capture Up-to-date Still Images........................................32
Uploading Snapshots Periodically ......................................35
Customize Graphics in Homepage .....................................36
Command Script for Complex Applications..........................37
URL for External Device Control ........................................40
URL of System Maintenance .............................................41
3
Configure System via FTP ................................................42
Telnet Commands ...........................................................47
Appendix ..............................................................49
A. Troubleshooting ..........................................................49
B. Frequently Asked Questions..........................................49
B. Frequently Asked Questions..........................................50
C. Upgrade System Firmware ...........................................54
D. URL Commands of Network Camera ..............................55
E. Time Zone Table..........................................................64
G. Technical Specifications ...............................................67
4
Package Contents
If any of the following items are missing, please contact your reseller.
Network Camera IPCAMW35
Power adapter
Camera Stand
CS Ring and wrench
I/O Connector
Software CD
5
Features and Benefits
Network Camera is a high-performance networking video transmitter. With powerful
VLIW DSP core and fully optimized algorithm, it can compress and transmit the high
quality real-time video through standard TCP/IP inter-network. In addition to meet the
basic needs of video feed, many advanced features are added to help building
applications of surveillance or web attraction. The state-of-art design well compromises
among stable, robust, simple-to-use and flexibility.
☆Real-time motion-JPEG compression
Video input can be efficiently compressed into packets of JPEG images without delay.
Optimal compression engine makes the equivalently excellent image with much smaller
size. There is no more sacrifice in remote monitoring and storage. Five levels of
compression ratio and three sizes of image resolutions are easy to meet your
requirement.
☆Robust system operation
Industrial real-time operating system prevents from malicious hackers and virus that
threat Windows or Linux systems. The on-board watchdog eternally monitors the system
operations for dead-proof.
☆Easy Web access via standard browser
You don’t have to install any software to access Network Camera. The embedded Web
server makes users can access Network Camera anywhere over Internet with any
popular Web browser. As long as you are connected to network, you can cast your eyes
on your precious property.
☆Password protection of system access
Password level protection is provided by the system to prevent from malicious intruders
from network. Once the password of administrator is entered, any user will need
password authentication to access Network Camera. Each user can have individual
access right to view video or control external devices.
☆Built-in motion detection
No more external sensors are required. The video channel can be setup to detect any
motion with customized settings. By tuning the object size and sensitivity, it is more
reliable to fit into your environment. With this built-in facility, you can easily setup a
6
security system in your home or office.
☆Weekly schedule for automatic surveillance
The user-defined time period will repeat weekly to check any security settings and
accordingly sending notification or drive external devices. It is easy to install in SOHO,
retail shop and home as a security system.
☆Flexible I/O control for external devices
There is one opto-isolated sensor input and one relay output to control external devices.
System integrators can easily replace the current analog systems to build an advanced
security system.
☆Remote system upgrade
To achieve the promise we made to support our valuable customers in life-time, the most
up-to-date firmware is always put on our web site to add new functions or solve known
bugs. A free upgrade wizard is included to facilitate the job.
☆Developer’s technical support
The high-performance Network Camera can be integrated into many applications under
perfect control of budget. The complete programming interface and standard JPEG
format can ease and speed developers’ task. More creative ideas can be found on our
Web site.
7
Physical Description
Front Panel
Status LED
The dual color LED indicates system and network status including power-on-self-test and
system activity. Refer to the Appendix for details.
Manual focus ring
The ring of the lens can be rotated to fine tune the focus. The video output at the rear
panel can be used to monitor.
Internal ring screw
If another special lens is needed to replace the bundled one, the image may be out of
focus for new lens and not able to fine tune by the manual focus ring. Use the included
wrench to loose the screw to adjust the internal ring to get the best focus. Then tighten
the internal ring to fix the focus.
Status LED
Internal ring screw
Manual focus ring
8
Rear Panel
BNC video output connector
A 75Ohms-resistance video connector can be connected to a TV for monitoring the video
from the front CCD sensor.
Ethernet 10/100 socket
Connect to an Ethernet network with a UTP category 5 cable of length shorter than 100
meters according to the standard.
Reset and restore button
There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset the
system or restore the factory default settings.
General I/O terminal block
1 ÅDI+ INPUT (Max. 50mA, 12VDC)
2 ÅDI- INPUT
3 ÅSW_COMMON OUTPUT (short with NC at initial state)
4 ÅSW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC)
9
Network Camera provides a general I/O terminal block with one digital input and one
relay switch for device control. Pin 1 and pin 2 can be connected to an external sensor
and the state of voltage will be monitored from the initial state 'LOW'. The relay switch
of pin 3 and pin 4 can be used to turn on or off the external device.
Power cord socket
Connect the power jack of the included power adapter. Connecting the power adapter
should be the last operation while physically installing Network Camera.
This manual suits for next models
1
Table of contents
Other 4xem Security Camera manuals
