4IPNET EAP706 User manual
EAP706
Enterprise Access Point
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
i
Copyright Notice
This document is protected by USA copyright laws and other laws. Besides, the
document is the property of 4IPNET, INC. You may not copy, reproduce, distribute,
publish, display, perform, or modify any part of this publication in any form or by any
means without prior written permission from 4IPNET, INC. You may not alter or remove any
copyright or other notice from copies of the content. All other brand and product names
are claimed or registered marks of their respective companies or organizations.
All rights reserved.
To download up-to-date version, please visit www.4ipnet.com.
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
ii
FCC CAUTION
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
※FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the
potential for harmful interference to co-channel Mobile Satellite systems.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
iii
CE CAUTION
Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for
European Community, Switzerland, Norway, Iceland, and Liechtenstein
Model: EAP706
For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and
hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement.
• Radio: EN 300.328:
•EMC: EN 301.489-1, EN 301.489-17,
• EMC: EN 55022Class B, EN 55024:+ A1 + A2including the followings:
EN 61000-3-2, EN 61000-3-3.
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
• Safety: EN 60950-1 + A11,
Caution:
This declaration is only valid for configurations (combinations of software, firmware, and hardware)
provided and supported by 4ipnet Inc. The use of software or firmware not provided and supported by
4ipnet Inc. may result in the equipment no longer being compliant with the regulatory requirements.
European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range
2.400-2.4835 GHz. This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be
restricted to certain frequencies and/or may require a license for operation. Contact your local regulatory
authority for compliance.
Taiwan NCC Statement
根據 NCC 低功率電波輻射性電機管理辦法 規定:
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或
變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善
至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受
合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
在5.25 ~ 5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
減少電磁波影響，請妥適使用
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
1
Preface
Package Contents
The 4ipnet EAP706 Wall Mount Access Point is
an on-the-wall as well as a desktop dual radio Wi-Fi
IEEE 802.11b/g/n + a/n/ac 2 X 2 MIMO access
point, designed to blend into a working or a living
environment practically and elegantly with its
simplistic yet sleek design.
The compact EAP706 in a small form factor lays
snug in a standard wall outlet box. Its side panel
features LED status indicators and two RJ45 ports.
It has the interfaces to serve both wireless and
wired LAN access. The RJ45 pass-through port
allows phone or IP-based devices to pass through
EAP706 without the need for additional outlets.
When coupled with the 4ipnet WHG series
Controller, the EAP706 supports Tunnel-based AP
Management, and comes with all standards
demanded by enterprise applications, including
business-grade security (802.1X, WPA and WPA2),
and multiple ESSIDs with VLAN tags to separate
the traffics of different departments. A centralized
WLAN management allows enterprises and
organizations to support a wide array of value
added applications, such as load balancing,
bandwidth control, and access control. The
patent-pending 4ipWES (Press-n-Connect)
technology bridges multiple EAP706s at the touch
of a button, which enables a quick and automatic
WDS Easy Setup by pressing the WES button on
EAP706. Extending wireless network coverage is a
breeze, be it across conference rooms or along
hallways.
EAP706’s high performance, security and optimal
invisibility make it a perfect choice of wireless
connectivity for your business.
1. 4ipnet EAP706 x 1
2. Quick Installation Guide (QIG) x 1
3. Power Adapter (DC 12V) x 1 (Optional)
4. Mounting Screws x 2
5. Universal Mounting Panel x 1
6. Mounting Plate Lock Tool x 1
7. Detachable Antenna x 4
It is recommended to keep the original
packing material for possible future shipment
when repair or maintenance is required. Any
returned product should be packed in its
original packaging to prevent damage during
delivery.
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
2
System Overview
Lower Panel
11 32
EAP706 Lower Panel
Upper Panel
1 2 3
EAP706 Upper Panel
1
LAN 1 –2 Ports
Attach Ethernet cables here to connect to the wired local network.
2
Bypass
RJ-45 pass-through port
3
DC Jack 12V 1 A
Attach the power adaptor here.
1
Restart / Reset Button
Press once to restart the system; Press and hold for more than 5 seconds
to reset to factory default.
2
LED Indicators
4 LED lights. Representation is listed at the top of the panel.
3
WES Button
WDS Easy Setup. Press the button to build up a WDS link with another
peer.
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
3
Back Panel
1
2 3
4a (2)
4b (2)
4a (1)
4b (1)
EAP706 Back Panel
1
Uplink (PoE) Port
For Uplink connection. This port can be used to connect to a controller,
gateway, or directly to the internet. PoE is supported.
2
110 Punchdown Block
(Pass-through)
Copper wire punch down for wiring bypass.
3
110 Punchdown Block
(Uplink PoE)
Copper wire punch down for Uplink connection. This can be used to
connect to a controller, gateway, or directly to the internet. PoE is
supported.
4a
SMA Connectors (2.4GHz)
Connect external antennas for RF Card A here. (1) is the primary
antenna connector while (2) is the secondary connector.
4b
SMA Connectors (5GHz)
Connect external antennas for RF Card B here. (1) is the primary
antenna connector while (2) is the secondary connector.
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
4
Hardware Installation
Please follow the steps mentioned below to install the hardware of EAP706:
Step 1. Place the EAP706 at the best location. The best location is usually at the center of your intended
wireless network. The EAP706 can be mounted on any wall outlets or on any flat surface;
Universal Mounting Panel
Secure the mounting plate on the mounting surface by tightening the screws (included) at the
highlighted area below:
a) Standard US Outlet box b) Standard EU Outlet box
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
5
Step 2. Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a switch,
a router, or a hub; or use the 110 punchdown block as your uplink connection. The 110 punchdown
block may be connected with the following pin assignment:
Orange
Blue
White Orange
White Blue
Brown
Green
White Brown
White Green
The EAP706 is now connected to your existing wired LAN network.
Step 3. There are three ways to supply power to EAP706
a) Connect the DC power adaptor to the power jack socket.
b) The Uplink port is capable of receiving PoE. Connect an IEEE 802.3af-compliant PSE device
(e.g. a PoE-switch) to the Uplink port of EAP706 with the Ethernet cable.
c) Use a standard 110 punchdown tool to punch copper wires onto the punchdown block (uplink)
Step 4. Fasten the Access Point to the mounting plate
a) Align theAccess Point to the mounting plate using the arrow printed on the back of theAccess
Point.
Quick Installation Guide
EAP706 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
6
b) Align theAccess Point to the 4 hooks, slide and snap Access Point to the mounting plate
c) To lock Access Point to the mounting plate, insert the tool provided and turn clockwise.
Now, the Hardware Installation is complete.
Punch down tools may vary by country. Please contact the 4ipnet Support Team for
recommendations if needed.
Please use only the power adapter supplied with the package. Using a different power adapter
may damage this system.
To verify the wired connection between the AP and your switch / router / hub, please also check
the LED status indicator of the respective network devices.
Table of contents
Other 4IPNET Wireless Access Point manuals
4IPNET
4IPNET OWL300 User manual
4IPNET
4IPNET EAP727 User manual
4IPNET
4IPNET EAP750 V1.00 User manual
4IPNET
4IPNET OWL550 User manual
4IPNET
4IPNET EAP760 User manual
4IPNET
4IPNET EAP200 User manual
4IPNET
4IPNET EAP747 User manual
4IPNET
4IPNET EAP210 User manual
4IPNET
4IPNET OWL630 User manual
4IPNET
4IPNET OWL400 User manual
4IPNET
4IPNET EAP701 User manual
4IPNET
4IPNET EAP220 User manual
4IPNET
4IPNET EAP200 User manual
4IPNET
4IPNET OWL500 User manual
4IPNET
4IPNET EAP740 User manual
4IPNET
4IPNET OWL800 User manual
4IPNET
4IPNET EAP700 User manual
4IPNET
4IPNET EAP757 V1.00 User manual
4IPNET
4IPNET EAP737 User manual
4IPNET
4IPNET EAP260 User manual
