4IPNET EAP700 User manual

EAP

V1.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

The contents of this publication may not be reproduced in any part or as a whole,

stored, transcribed in an information retrieval system, translated into any language,

or transmitted in any form or by any means, mechanical, magnetic, electronic,

optical, photocopying, manual, or otherwise, without the prior written permission

of 4IPNET, INC.

Disclaimer

4IPNET, INC. does not assume any liability arising out the application or use of any

products, or software described herein. Neither does it convey any license under its

parent rights not the parent rights of others. 4IPNET further reserves the right to ma e

changes in any products described herein without notice. The publication is subject to

change without notice.

Trademarks

4IPNET (4ipnet) is a registered trademar of 4IPNET, INC. Other trademar s mentioned in

this publication are used for identification purposes only and may be properties of their

respective owners.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 1 -

Preface Package Contents

The 4ipnet EAP700 Wall Jack Access Point is

an in-the-wall Wi-Fi IEEE 802.11b/g AP,

designed to blend with any office, home

interior architecture or furnishings effortlessly.

EAP700 is an easy-to-install and

cost-effective solution for most of indoor

wireless deployments, including hotel rooms,

apartments, offices, classrooms, libraries,

private homes, public kiosks, etc. When

working under one of 4ipnet Controllers, the

combined network turns into an intelligent

building solution, a managed internet service,

or a Wi-Fi hotspot network of various scales.

This Quick Installation Guide provides

instructions for getting started with EAP700.

EAP700 x 1

Quick Installation Guide (QIG) x 1

CD-ROM x 1

LED Sticker x 2

It is recommended to keep the

original packing material for possible

future shipment when repair or

maintenance is required. Any returned

product should be packed in its

original packaging to prevent damage

during delivery.

Optional accessories to be purchased

separately:

AC-DC Adaptor

U-shaped Wall & Ceiling Mounting

kit

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 2 -

System Overview

Front Panel

①

①①

①. WES Button



Press for 3 seconds to initiate Master AP’s WDS connection.



Press and release immediately to initiate Slave AP’s WDS connection.

②

②②

②. RESET Button



Pressing the button more than 3 seconds will reset the system to default settings.

③

③③

③. LAN Port



The LAN port is for connection with wired network.

LED status indication:

④

④④

④. LAN LED



OFF indicates no connection; ON indicates connection; BLINKING indicates

transmitting data.

⑤

⑤⑤

⑤. WLAN LED



Green LED ON indicates system ready.

⑥

⑥⑥

⑥. Power LED



Green LED On indicates power on; OFF indicates power off.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 3 -

In-Wall Panel

①

①①

①. POWER SOCKET



Attach the power adapter here.

②

②②

②. PoE (LAN) Port



The LAN port is for connection with wired networks or PoE Switch.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 4 -

Hardware Installation

Please follow the steps mentioned below to install the hardware of EAP700:

Before the installation, assemble the following parts accordingly for later in-wall placement.

①

①①

①. Unpack the package and remove the cover and the frame.

②

②②

②. Lock the screw correctly to the frame.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 5 -

③

③③

③. Slide the frame from the two sides to the front until locked to the fixed point.

④

④④

④. Cover it with faceplate and push the frame to the end.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 6 -

⑤

⑤⑤

⑤. Optional U-shaped mounting kit: Slide the frame from the two sides to the front until

locked to the fixed point, and adjust the angel of set to the wall.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 7 -

Installation Steps:

1. Place the EAP700 at proper location.

The best location for EAP700 is usually at the center of your wireless network.

2. Connect EAP700 to your network device.

Connect one end of the Ethernet cable to the LAN port of EAP700 and the other end of the

cable to a switch, a router or a hub. EAP700 is then connected to your existing wired LAN

network.

3. There are two ways to supply power over to EAP700.

(1) Connect the power adapter to the EAP700 power socket.

(2) EAP700 PoE (LAN) port is capable of transmitting DC currents via its PoE (LAN) port.

Connect an IEEE 802.3af-compliant PSE device, e.g. a PoE-switch, to the PoE (LAN)

port of EAP700 with the Ethernet cable.

Now, the Hardware Installation is completed.

Quick Installation Guide

Quick Installation GuideQuick Installation Guide

Quick Installation Guide

EAP700 Enterprise Access Point ENGLISH

- 8 -

Getting Started

4ipnet EAP700 supports web-based configuration. Upon the completion of hardware installation,

EAP700 can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or

Internet Explorer version 6.0 and the above.

The default values of LAN IP address and subnet mask of EAP700 are:

IP Address:192.168.1.1

Subnet Mask: 255.255.255.0

•To access the web management interface, connect the administrator PC to the LAN port of

EAP700 via an Ethernet cable. Then, set a static IP address on the same subnet mask as

EAP700 in TCP/IP of your PC, such as the following example (Please note that the IP

address used shall not be duplicated with the IP address of other devices within the same

network.). In the Local Area Connection Properties, selecting the Internet Protocol (TCP/IP)

Properties, use the following IP address as the default setting:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

•Launch the web browser on your PC by entering the IP address of EAP700

(http://192.168.1.1) at the address field, and then press Enter. The following Administrator

and then click Login to log in.

Username:“admin”

Password:“admin”

Table of contents

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide