3D Systems ProJet SLA 6000 User manual
3D SYSTEMS, INC. P/N 40-D119 REV_A
ProJet® SLA 6000/7000
Long Term Shutdown Procedure
Original Instuctions
3D SYSTEMS, INC. P/N 40-D119 REV_A
If you will be shutting down your ProJet 6000/7000 system for an extended period, we recommend to do the following:
HOME THE ELEVATOR
1. At the bottom of the touch screen, tap the Advanced button.
2. Tap the Elevator/Leveler button to open the Elevator/Leveler screen
3. Tap the Home button to home the elevator.
4. Wait for the elevator to complete the homing process.
DISCONNECT THE MATERIAL LINE TO THE PRINT TRAY
We recommend that you disconnect the material line from the print tray to prevent back ow of material into the cart. This
could lead to the reservoir of the cart becoming over lled and causing a material leak from the top of the reservoir lid.
1. Open the Build Chamber and Cart doors.
2. While wearing Nitrile gloves, remove the cart hose from the print tray by depressing the quick-release button and
disengaging the connector from the print tray. Resin may drip out of this connector, be sure to have a towel handy.
3. Connect the hose to the free connector on the material cart. Eliminate slack by wrapping it around the grooved
component on the umbilical connector.
BACKUP CRITICAL FILES
Log Into Windows
1. Please connect a keyboard and mouse to the USB ports on the machine.
2. Press Ctrl + Alt+ Del on the keyboard and tap on Log O on the touchscreen.
3. Conrm that you wish to Log O. Log into Widows Desktop with the follow credentials:
a. User Name: administrator
b. Password: 3dsys
Backing Up Files
1. Create a new folder on the ProJet 6000 Desktop named PJ6KBackup.
2. Using Windows Explorer, navigate to
a. Copy the le and paste it into the PJ6KBackup folder.
3. Using Windows Explorer, navigate to C:/Program Files/3D Systems/ProJet 6000/current_version/
a. Copy the le and paste it into the PJ6KBackup folder.
b. Copy the le and paste it into the PJ6KBackup folder.
1LONG TERM SHUTDOWN PROCEDURE
3D SYSTEMS, INC. P/N 40-D119 REV_A
4. Navigate to C:/Program Files/3D Systems/ProJet 6000/current_version/Data/
a. Copy the le and paste it into the PJ6KBackup folder.
b. Copy the le and paste it into the PJ6KBackup folder
c. Copy the PowerCal folder and paste it into the PJ6KBackup folder.
5. Navigate to C:/Program Files/3D Systems/ProJet 6000/license/
a. If there is no le present, disregard this step.
b. If there is a le present, copy and paste it into the PJ6KBackup folder.
6. Copy and paste the entire PJ6KBackup folder onto a ash drive or alternate storage device. Keep this folder in a secure
location in the event the les inside are needed.
POWERING OFF THE SYSTEM
Below are two options for powering o the system. Choose an option that best suits your situation.
1. While still in Windows
1. Click on the Start button.
2. Click on and wait for Windows to complete the shutdown process.
3. Go to the rear of the machine and toggle the power switch to the right to turn o the power to the system.
4. If you wish you can disconnect the electrical power cable from the machine or the wall.
2. While In The User Interface
1. At the bottom of the touch screen, tap the button.
2. Tap on the Printer button
3. Tap on the button.
4. Conrm that you want to Shutdown the Printer.
5. Wait for the system to complete shutdown.
6. Go to the rear of the machine and toggle the power switch to the right to turn o the power to the system.
7. If you wish you can disconnect the electrical power cable from the machine or the wall.
3D SYSTEMS, INC. P/N 40-D119 REV_A
3D Systems, Inc.
333 Three D Systems Circle | Rock Hill, SC 29730 | USA
www .3dsystems .com
©2020 3D Systems, Inc.
All rights reserved.
PN: 40-D118 Rev. A
This manual suits for next models
1
Table of contents
Other 3D Systems 3D Printer manuals
3D Systems
3D Systems Cubify CUBEX Duo Parts list manual
3D Systems
3D Systems wematter Gravity User manual
3D Systems
3D Systems CUBE User manual
3D Systems
3D Systems ProJet MJP 5600 User manual
3D Systems
3D Systems ProJet 6000 User manual
3D Systems
3D Systems CUBE User manual
3D Systems
3D Systems ProJet 4500 User manual
3D Systems
3D Systems ProX 800 User manual
3D Systems
3D Systems ProJet 2500 User manual
3D Systems
3D Systems NextDent 5100 User manual
3D Systems
3D Systems Cubify CUBEX Duo Operating and safety instructions
3D Systems
3D Systems ProJet 1200 User manual
3D Systems
3D Systems CUBE User manual
3D Systems
3D Systems ProJet 5000 User manual
3D Systems
3D Systems SLA 750 Series User manual
3D Systems
3D Systems CubePro User manual
3D Systems
3D Systems PostCure 1050 User manual
3D Systems
3D Systems CubePro Manual
3D Systems
3D Systems ProJet 1200 User manual
3D Systems
3D Systems ProJet 5500X User manual
