3D Systems CUBE Operator's manual
Help Documentation
Print monitoring app for iOS and Android
Cube Print
3D Systems, Inc. 2
1 INTRODUCTION
Thank you for purchasing a 3D Printer from 3D Systems.
The Cube Print mobile app is designed to help you in your 3D-printing process, and enables you to monitor and control your Cube or
EKOCYCLE printer while its printing. Use the Windows or Mac version, available at 3dsystems.com, to setup and send prints to the
printer.
This document will guide you how to use the Cube Print mobile app.
For more information on using your printer, please see the printer’s User Guide avaliable at 3dsystems.com
COPYRIGHT
©2016 by 3D Systems, Inc. All rights reserved. This document is subject to change without notice. This document is copyrighted and
contains proprietary information that is the property of 3D Systems, Inc. The 3D Systems logo, 3D Systems, and Cube are registered
trademarks of 3D Systems, Inc.
©2015 The Coca-Cola Company. “EKOCYCLE,” the EKOCYCLE Glyph, the EKOCYCLE Flag, and the Contour Bottle Design are
trademarks of The Coca-Cola Company.
The EKOCYCLE lament contains 25% recycled materials, using an average of 3 assorted recycled 20oz PET bottles.
GETTING HELP
Select Help in the menu to open this help document. Or check the printers User Guide available at 3dsystems.com.
SUPPORT
Please go to www.3dsystems.com/store/support to get support.
3D Systems, Inc. 3
2 SETTING UP YOUR CUBE PRINT SOFTWARE
For information on how to unpack and start using your printer, see the User Guide available at 3dsystems.com.
SYSTEM REQUIREMENTS
Android:
Phones/tablets running Android 4.0 (Ice Cream Sandwich) and above.
iOS:
iPhone running iOS 8 or above.
Works on iPad in 2X Mode running iOS 8 or above.
UPDATING THE APP
Andoid:
Update the app in the Play Store, tap on My Apps and nd Cube Print, if there are updates available the app will be labled Update.
iOS:
Update the app in the Appstore, updates can be found in the Updates tab.
3D Systems, Inc. 4
3 APP OVERVIEW
AMenu CLeft Cartridge EPrint Status
BConnected Printer and
status DRight Cartridge FPrint Control Buttons. Pause or
Cancel the current print.
CONNECTING PRINTER
When the app is opened, printers will be searched for on the network. If the printer is not found, click Find a Cube Manually, and enter
the IP-Address of the printer. The printer IP-Address can be found under Settings > Wi on the printer.
A
D
B
C
F
E
3D Systems, Inc. 5
MENU
Menu
Cube Info - Connect to or see information about the connected
printer.
Cartridge Status - See current status of cartridges.
Recycle Statistics (EKOCYCLE) - See amount of recycled bottles.
Help - Download and open help documentation.
About - Information about the app.
Cube Info
Manage and see information about the connected printer.
Firmware - Shows rmware version of the connected printer.
Printer name - Name of the connected printer.
Printer MAC address - Unique MAC address of the printer.
Serial Number - Serial number of the connected printer.
Part fan - Status of part fan.
Printjet fan - Status of printjet fan.
Left print jet temp - Temperature of left print jet.
Right print jet temp - Temperature of right print jet.
Wi - Wi-Fi network connection.
Printer IP address - Shows the printers IP-address.
Find Cubes on the network - Find Cube printers connected to
the network.
Find a Cube manually - Enter the IP-address of the Cube to
connect manually.
3D Systems, Inc. 6
Recycle Statistics (EKOCYCLE)
See the total number of bottles that has been recycled with the connected
EKOCYCLE printer.
Cartridge Status
See the status of the connected printer’s cartridges.
Help
Open up the help documentation, it is available as a PDF le. To get more help, you can contact 3D Systems Support.
About
See information about the app, such as version number and copyright information.
3D Systems, Inc.
333 Three D Systems Circle | Rock Hill, SC | 29730
www.3dsystems.com
©2016 3D Systems, Inc. All rights reserved.
Other manuals for CUBE
9
Table of contents
Other 3D Systems 3D Printer manuals
3D Systems
3D Systems ProJet 1200 User manual
3D Systems
3D Systems Cubify CUBEX Duo Parts list manual
3D Systems
3D Systems ProX DMP 100 User manual
3D Systems
3D Systems BFB-3000 User manual
3D Systems
3D Systems ZPRINTER 150 User manual
3D Systems
3D Systems ProJet SLA 6000 User manual
3D Systems
3D Systems CubeX User manual
3D Systems
3D Systems 3D Sprint User manual
3D Systems
3D Systems ProX User manual
3D Systems
3D Systems CubePro User manual
3D Systems
3D Systems Cube 2nd Generation User manual
3D Systems
3D Systems ProJet 3500 Max Series User manual
3D Systems
3D Systems Cube 3rd Generation User manual
3D Systems
3D Systems CubePro User manual
3D Systems
3D Systems CubePro User manual
3D Systems
3D Systems ProJet 6000 User manual
3D Systems
3D Systems ProJet 4500 User manual
3D Systems
3D Systems ProJet 4500 User manual
3D Systems
3D Systems ProJet 7000 User manual
3D Systems
3D Systems CUBE User manual
