Zxch ZX-V8 User manual
Owner’s Manual Of
The Motorized Treadmill
- 1 -
CONTENTS
SAFETY PRECAUTIONS----------------------------------------------------------------2
WARRANTY DESCRIPTION-----------------------------------------------------------3
SAFETY USE ATTENTION-------------------------------------------------------------4
ASSEMBLY INSTRUCTION-----------------------------------------------------------5-9
TECHNICAL PARAMETERS-----------------------------------------------------------10
GETTING START GUIDE--------------------------------------------------------------11-12
WARM-UP EXERCISE-----------------------------------------------------------------13-14
OPERATION INSTRUCTION---------------------------------------------------------15-22
SAFETY EXERCISE --------------------------------------------------------------------23
MAINTENANCE INSTRUCTION-----------------------------------------------------24
MAINTENANCE GUIDELINE-------------------------------------------------------25-26
EXPLODED DRAWING---------------------------------------------------------------27
PART LIST-------------------------------------------------------------------------------27-30
HRC BELT INSTRUCTION-----------------------------------------------------------30
- 2 -
Warning:
In order to avoid the accident, you have to pay attention to the following operation :
1.When using the treadmill ,keep attaching the safety key clip to your clothes or belt;
2.When you are exercising, PLS swing your arms naturally, straight ahead. Don’t look at your feet;
3.Pls accelerate the speed gradually, adapt to the current speed before the acceleration ;
4.When run into emergency , press the emergency stop button or pull away the safety key;
3.When the treadmill was completely stopped leave is allowed.
Notice:Strictly according to the assembly instruction to install this product.
Attention:
Please read the following instructions carefully before you use the treadmill
1、Before starting any exercise plan, we suggest you to consult your doctor.
2、Please make sure all the bolts are locked tightly.
3、Do not put the treadmill at damp place, it may cause damage.
(We take no responsibility for any damage or injury caused by the above reasons)
4、Please wear sports suits and sports shoes before you start to exercise.
5、Only do serious exercise 40 minutes later after meal.
6、Do warm-up exercise to avoid injury.
7、People who suffer from hypertension should consult the doctor before exercise.
8、Children should stay away from the this machine, to avoid injury.
9.This fitness equipment is only for adults.
10.Do not plug anything into any parts of this fitness equipment, or it may cause damage.
- 3 -
Warranty range
Damage in correct maintenance and normal operations (not factitious factors). Warranty card to the
original purchaser, shall not be transferred.
Warranty Time
Commercial USE
·Steel frame lifetime warranty
·Motorwarrantyfor5years
·12months warranty for other parts
·Free manual repair within one year
The following conditions are not under warranty range：
（1） As a result of abuse, neglect, accident, or unauthorized modification;
（2） The damage due to incorrect adjustment of the running belt and motor belt;
（3） As a result of abnormal maintenance；
（4） Other illegal operations and resulting damage.
Repair and Maintenance Service
All the accessories are available in the local distributor; you can get kinds of services from our
distributors.
- 4 -
Only the treadmill had finished the installation and the motor protect cover is put on, you can
connect power line. Plug in the power line into the power socket which is with the 16Asafety
grounding, we suggest you to use over current protector to ensure the safety of the user and the
treadmill.
1．PLS place the treadmill on a clear, level ground. Do not place the treadmill on thick carpet ,as
not to effect with ventilation under the treadmill. Also do not use the treadmill placing it by water
or outdoor,notice to avoid moisture.The treadmill power line is specific, if the power line is
damaged, please purchase from the dealer, or contact to the company directly.
2．When you place the treadmill, do not let the treadmill cover the socket on the wall, which is
convenient to plug in the power line.
3．Never start the treadmill while you are standing on the running belt. After connecting the power,,
there maybe a pause after the running belt begins to move, you should always stand on the
treadmill side plastic non-slip rails until the belt is moving.
4．Do not wear long, loose fitting clothing when you exercise, in case it may get caught in the
treadmill. Usually you need to wear running shoes or sports shoes with rubber soles.
5．Never remove the protective cover casually, if need to open for maintenance, PLS make sure to
unplug the power line firstly.
6．Keep the kids away from the treadmill during using.
7．When you use the treadmill the first time, hold the handrails until you adapt.
8. The treadmill is made for special use, Please do not remodel or refit for other use.
If the treadmill suddenly increase in speed or speed up continually, due to an electronic system
problem, please pull out the safety switch, the treadmill will immediately stop.
- 5 -
The followings are the parts pictures of a whole treadmill. When you open the carton, you
will find the below spare parts.
Installation tools:
3L/R. Upright 35L/R.Upright cover 66.Silicone oil 67.wrench 19-22
68.wrench 17-19 69.Wrench 70.10#wrench 71.6#wrench
72.5#wrench 73.4#wrench 120.screw M12*70 90. spring line
93.Frame assembly 112. meter assembly 141.screw M5*15 124.screw M8*15
152.washer∮9*∮
16*t1.6
- 6 -
Install：
First Step:
Connect the bottom wire of
meter (17) with the middle wire
of meter(16). Then put the L/R
upright on the frame
assembly(93), lock them with
screw M12*70(120)，do not lock
them tightly.
Second Step:
Put the meter assembly (112) on
the upright(3L/R). Connect the
middle wire of the meter（16）
with the up wire of computer
（15）. Use the Screw M8*15
(124) and the Washer(152)
lock tight
- 7 -
V8 wire connecting method
1. Use wrench to uninstall meter wire-cover board (right)(as picture 1.2). Then take out the
upper wire from meter(as picture 3)
（picture1）（picture2）
（picture3）（picture4）
2. Put the middle wire in the right side hole of the meter(as picture 4.5). then connect
them(as picture 6)
（picture5）（picture6）
- 8 -
3. Fix the meter on the frame.use screw bag tools bag M6 wrench.Lock tight four each bolts
M8*15 and flat washers∮9*∮16*t1.6.(as picture 7.8)
（picture7）（picture8）
4. Then put the tidy wire in the meter,use wrench to assemble the uninstalled meter
wire-cover board(right) (as picture 9).At last assemble the storage box (in the accessory
box )to the meter(as picture 10)
（picture9）（picture10）
- 9 -
Forth Step：
As the picture show. If the treadmill
is uneven in height. You Can use
the toolkit 17-19,19-22 wrench , do
fine-tuning. Anticlockwise to raise
height , clockwise to lower the
height.
Third Step：
Lock the Screw M12*70(120)
Tightly ,Lock the Upright cover
(35L/R) on the Frame
assembly(93) with the Screw
M5*10(141).
Table of contents
Other Zxch Treadmill manuals
Popular Treadmill manuals by other brands
Smooth Fitness
Smooth Fitness EVO 3i user manual
NordicTrack
NordicTrack NETL81810.0 user manual
Schwinn
Schwinn 830/Journey 8.0 Assembly manual / owner's manual
Keys Fitness
Keys Fitness HealthTrainer HT-740T owner's manual
Spirit
Spirit XT8 Service manual
NordicTrack
NordicTrack T 14.0 Treadmill Manuel de l'utilisateur