Zte MF920U User manual
1
MF920U
Quick Start Guide
2
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057
Getting to Know Your Device
Appearance
The following figure is for your reference only.
3
1. Charging/micro-USB jack
2. Indicator light
3. Power key
Press and hold for about 2 seconds to power on/off
your device.
Press and hold for about 10 seconds to power off your
device, if it is in abnormal status. And then press and
hold for about 2 seconds to power on your device
again.
4. WPS key
Press and hold for about 2 seconds to activate the WPS
function.
5. micro-SIM card slot and reset hole
Reset hole: Press and hold for about 2 seconds to restore your
device to the factory settings.
4
Getting to Know Your Device
Indicator lights
Indicator Status
Description
Battery
Red solid /
blinking
The battery is low. Please
charge the battery.
Green
blinking
The battery is being
charged.
Green
solid
The battery level is middle
or high.
Light off Your device is powered off
and not being charged.
Wi-Fi
Blue solid Wi-Fi is active.
Blue
blinking
WPS is active.
Light off Wi-Fi is off.
SMS
Blue solid You have unread
messages.
5
Blue
blinking
You have new messages or
the message storage is
full.
Light off There is neither an unread
message nor a new
message.
Network
Red The device is in error
status.
The device is not
registered to the
mobile network.
There is no micro-SIM
card inserted.
There is no network
service available.
Green
solid
The device is registered to
the 2G/3G mobile
network.
Green
blinking
The device is connected to
the 2G/3G mobile network
and data is being
transferred.
Blue solid The device is registered to
the 4G LTE network.
6
Blue
blinking
The device is connected to
the 4G LTE network and
data is being transferred.
Getting to Know Your Device
Connection Scenarios
The device uses your micro-SIM card to access the Internet. It
allows multiple clients to surf on the Internet at the same time.
The following figure is for your reference only.
7
Installing Your Device
1. Open the micro-SIM card slot cover.
NOTE:
Do not remove the cover rudely, because it is connected with
the device.
2. Install a micro-SIM card to the micro-SIM card slot.
WARNING!
Your device does not sup port SIM cards, nan o-SIM cards or any
other non-standard micro-SIM cards. To avoid damage to the
device, do not use those cards or any card holders.
3. Close the micro-SIM card slot cover.
8
9
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Ensure that your computer or other client devices have
enabled Wi-Fi, and search for available wireless networks.
NOTE:
Refer to your Wi-Fi-enabled client device manual for further
details on how to search for wireless networks. If you use a
computer, you need to set your computer to obtain an IP
address automatically.
3. Select the Wi-Fi name (SSID) of your device, and click
Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
NOTE:
Refer to the chapter
Getting to Know the Wi-Fi SSID and
Password
to get the default Wi-Fi SSID and password.
5. Wait until the client device is connected to your device
successfully.
10
Using a USB Cable
1. Connect a computer to your device with a USB cable.
2. Power on your device. The operating system detects and
identifies new hardware, and automatically installs the
software.
NOTE:
If the system does not automatically launch installation, you
can double-click the device installation icon in My Computer >
ZTEMODEM to install the software.
3. Wait until the computer is connected to your device
successfully.
Other manuals for MF920U
2
Table of contents
Other Zte Network Router manuals
Zte
Zte ZXR10 3800-8 Installation instructions
Zte
Zte MF279T User manual
Zte
Zte MF253L User manual
Zte
Zte AT&T MF279 User manual
Zte
Zte ZXR10 1800-2S Guide
Zte
Zte MF286D User manual
Zte
Zte ZXR10 ZSR User manual
Zte
Zte ZXR10 3800-8 Installation instructions
Zte
Zte MF30 User manual
Zte
Zte ZXR10 2600 Technical specifications
