Zte EPON SFU Series User manual
ZTE EPON SFU Products
1GE/1GE+CATV
User Manual
Version：V1.1
Contents
1Note .......................................................................................................................................1
1.1 Installation Precautions.....................................................................................................1
1.2 Precautions for Use ...........................................................................................................1
2Introduce................................................................................................................................3
2.1 Product Feature .................................................................................................................3
2.2 Environmental Requirements............................................................................................4
2.3 Product Interface Definitions............................................................................................5
2.4 Product LED Definitions ..................................................................................................5
2.5 Device Connection............................................................................................................6
2.6 Network Application.........................................................................................................6
3ONU Local WEB login..........................................................................................................6
3.1 ONU and PC physical Connection....................................................................................7
3.2 Computer Access ONU Local WEB .................................................................................7
4ONU Registration Information Configuration.......................................................................8
4.1 ONU Registration Status View .........................................................................................8
4.2 ONU Optical Power Information View.............................................................................9
4.3 ONU Registration LOID Configuration............................................................................9
5Internet Basic Configuration................................................................................................10
5.1 Routing mode broadband Internet settings .....................................................................11
5.2 Broadband Internet Access In Bridge Mode ...................................................................16
5.3 View Broadband WAN Status.........................................................................................16
5.4 Delete Internet WAN Connection ...................................................................................17
6ONU LAN configuration.....................................................................................................18
6.1 LAN IP Address Configuration.......................................................................................18
7Multicast / IPTV Service Basic Settings..............................................................................19
8CATV Management .............................................................................................................20
8.1 CATV Parameter Configuration......................................................................................20
8.2 CATV Information View.................................................................................................20
9ONU Device Management...................................................................................................21
9.1 ONU Device Remote Access Settings ............................................................................21
9.2 Restore Default ...............................................................................................................22
9.3 Software Upgrade ...........................................................................................................22
9.4 Reboot Device.................................................................................................................23
Concluding Remarks.................................................................... Error! Bookmark not defined.
1Note
1.1 Installation Precautions
Do not near flammable or conductive items, high temperature, direct sunlight or moist
environment, or on PC chassis, and check whether other home equipment placed around
stability
Check the cable line. Test and confirm the ac or dc input voltage in the range of allowable,
and direct current (dc) correct polarity.
Unless the manufacturer has given permission, please use the volume and the types of the
power supply with Ming products attached adapter
To prevent lightning damage to the product, make sure that the power outlet and the power
adapter ground are securely grounded. In the thunderstorm, be sure to unplug the power and
all the connections.
Equipment shall be less than 10% of the input voltage fluctuations, power plug with a
refrigerator, hair dryer, electric iron not use the same socket.
To avoid any damage to body by power socket overload, or damage to cause electric shock or
fire plug, please check the power cord, if found damaged, please change immediately.
Please place the equipment on the smooth plane and equipment cannot be placed on other
items.
Equipment is easy heat when working, should maintain the appropriate cooling space to
avoid damage caused by overheating products. The elongated holes on the housing are
designed for heat dissipation. Keep the ventilation clean and prevent the items from falling
into the inside of the equipment. Doing so may cause damage or fire to the equipment. Do
not spill liquid onto the surface of the equipment.
1.2 Precautions for Use
Please read the user manual carefully before using the equipment and follow all the
precautions on the user manual.
Do not look straight at fiber which may damage the eyes. Please wear safety
glasses to effectively protect your eyes from damage. Wear the fiber cap when
fiber no in use.
Power off the device when it not in use.
Please make sure the power switch is closed before plug the power supply, to avoid
surge. Please be careful when remove the power supply, transformer temperature
may be higher.
For safety, please do not open the shell of equipment, especially equipment power
on.
Unplug the power supply before cleaning equipment. Use a soft dry cloth cleaning
equipment, do not use the liquid or spray.
Do not use this product connected to any electronic products unless got our
engineer allow. because any wrong connection may cause electricity or fire danger.
2Introduce
ZTE EPON SFU series of terminal equipment is based on EPON technology based on
the broadband access market, to meet the broadcaster operators broadband access and FTTH,
and design passive optical network terminal products that integrate CATV optical receiver
and achieve broadband, CATV dual network integration. It is based on mature and stable,
cost-effective Gigabit EPON technology and integrate Gigabit Ethernet switching
technology, WDM technology and HFC light reception technology, with high reliability, easy
management and good quality of service (QoS) and so on. Technical performance of
equipment meet the IEEE802.3ah, China Telecom EPON equipment technical requirements
(V2.1 / V3.0) and other requirements.
EPON technology is a combination of PON technology and Ethernet technology
advantages of emerging technologies, is a point to multi-point networking technology，with
high bandwidth, high efficiency, large coverage, rich user interface and many other
advantages, is the operator to achieve access network business broadband, integrated
transformation of the ideal technology.
ZTE chipset EPON SFU series also integrates powerful routing and forwarding
functions by default in the case of SFU (pure data). It is easy to manage and can be flexibly
upgraded, expanded, and networked. The equipment has been implemented with EPON
central office equipment (Huawei / ZTE / FiberHome / Alcatel-Lucent) OLT) interoperability,
composed of Gigabit systems, to meet access needs of the two-in-one video, data services,
FTTH / FTTO.
2.1 Product Feature
⚫Internet, CATV, IPTV service access
⚫Equipment technical performance meets IEEE802.3ah, China Telecom CTC 2.1 &
CTC3.0 standard
⚫Support bidirectional FEC, supports the RS (255, 239) FEC decoding
⚫Supports default SFU (pure bridged data) access
⚫Support PPPoE, DHCP, static IP broadband service access
⚫Support NAT, static routing, port forwarding
⚫Support data encryption, VLAN transparent, vlan tag, vlan trunk
⚫Support up and down traffic limit function
⚫Supports port loop detection / port link status detection / power dying gasp alarm
⚫Support OLT remote upgrade / WEB local upgrade function
⚫Supports broadcast storm suppression
⚫Support port isolate between different port.
⚫Support port flow control
⚫Support managed by different manufacturers OLT work as SNMP-agent. Easy to
install and maintain
⚫Provide a variety of fault alarm function, easy to fault diagnosis
⚫Support AES-128 decryption, support key generation and switching
⚫Support DBA technology and priority Dual management model to ensure minimum
bandwidth requirements for users
⚫Support CATV service remote shutdown function
⚫Working wavelength: 1100 - 1650nm
⚫Optical reflection loss:> 45dB
⚫Input optical power: -18dBm ~ 0dBm
2.2 Environmental Requirements
Operation temperature：-0°C～50°C
Operation humidity：10%—90%(Non-condensing)
Power adapter input: 12V / 0.5A
Transmitted optical power: 0~4dBm
Input optical power: -3 ~ -27dBm
2.3 Product Interface Definitions
2.4 Product LED Definitions
Indicator
Description
1
PWR
Power status
On: The ONU is power on
Off: The ONU is Power off
2
LANn
LAN port status
On: Ethernet connection is normal
Blinking: Data is being transmitted through
theEthernet port
Off: Ethernet connection is not set up
3
PON
ONU Register
On: Success to register to OLT
Blinking: In process of registering to OLT
Off: Failed to register to OLT;
4
LOS
GPON optical
signals
On: Optical power lower than receiver
sensitivity ;
Off: Optical in normal
5
CATV
CATV status
On：CATV optical normal
Off：The CATV signals are not received
2.5 Device Connection
⚫Connecting the fiber: Insert the SC fiber connector into the PON connector on the
rear panel of the ONU.
⚫Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port
of the ONU and the home device, ie, the computer, IPTV set-top box.
⚫Connecting the coaxial cable: Connect the coaxial cable to the RF connector of
the ONU.
⚫Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the
ONU 12V DC power jack.
2.6 Network Application
【1GE + CATV ONU networking applications】
3ONU Local WEB login
3.1 ONU and PC physical Connection
a) Connect your computer's local network card to the LAN port or ETH port of the ONU via a
network cable.
b) Set the IP address of the computer's local network card to 192.168.101.X (X: 2-254).
c) The computer opens the cmd window. To ensure that the computer can ping ONU
management ip address 192.168.101.1
3.2 Computer Access ONU Local WEB
In the case # 3.1 computer can communicate with the ONU, open the
computer's Web browser (IE, Firefox, google), copy and paste the ONU access
URL: http: //192.168.101.1, pop-up as follows ONU prompt landing page:
Table of contents
Other Zte Network Hardware manuals
Zte
Zte ZXA10 C300 User manual
Zte
Zte ZXHN F668 User manual
Zte
Zte ZXA10 C320 User manual
Zte
Zte FSAP 9800 User manual
Zte
Zte Unitrans ZXMP M600 Owner's manual
Zte
Zte MF993C User manual
Zte
Zte ZXA10 C320 Guide
Zte
Zte ZXSDR R8860 User manual
Zte
Zte ZXSDR R8860E GU858 User manual
Zte
Zte ZXSDR R8882 L708 User manual
Popular Network Hardware manuals by other brands
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL product manual
B&B Electronics
B&B Electronics ZXT9-IO-222R2 product manual
Yudor
Yudor YDS-16 user manual
D-Link
D-Link ShareCenter DNS-320L datasheet
Samsung
Samsung ES1642dc Hardware user manual
Honeywell Home
Honeywell Home LTEM-PV Installation and setup guide
