ZKTeco D1s User manual
1
1. Overview
2. Power on the Device
Place a finger on the fingerprint sensor or press the /◄key to turn on the device. If
there is no any further operation within three seconds, the device will automatically enter
the stand-by mode.
Notes of Battery Charging:
1. We recommend using the official power adaptor. If you use a different power adaptor,
please ensure that it is a 5V 2A adaptor.
2. Shorter cable will help reduce charging time. Generally, it takes about 8 to 10 hours to
fully charge the power bank.
3. Do not charge the device near fumes and humid environment or cover the device
when it is charging.
D1s & D2s Quick Start Guide
Version: 1.1Date: Apr. 2018
D1s
D2s
2
3. Date/Time Setting
Press M/OK > Date Time to enter the Date Time interface.
4. Adding User
Press M/OK > User Mgt. > Add User to enter the Add User interface, enter User ID, Name,
modify User Role (Administrator/ User), enroll fingerprint/ password. Press M/OK on the
initial interface.
5. T9 Input
T9 input (intelligent input) is a quick and highly-efficient input method. The device
supports T9 English and symbol input. By using T9 input, names and some symbols can be
input.
Press the M/OK key to enable
the T9 input method.
Press▲/▼to switch
between the English or
character mode. Press key
2 once to input A.
Input Angel by selecting
each character by the
same way.
3
6. Quick Query of Attendance Records
Users may take a look at their attendance records on the current day and check to see if
there is any missing or incorrect record. Users may therefore be able to timely notify the
administrator of certain wrong records.
Type 1: Save attendance records and allow quick inquiries
Each employee may review his/her attendance record on the current day by selecting
M/OK after successful identity verification with his/her fingerprint.
Verified!
Press M/OK within 10 s.
View all attendance records
on the current day.
Press M/OK to view the details of the attendance records.
Type 2: View the attendance records directly and quickly without saving the records
Press
0
on the initial
interface to display the
Record interface.
Press finger/input ID, enter
the start and end time using
keypad, then press OK.
R
ecords are shown as above.
Press M/OK to view the details of the attendance records.
4
7. Download/Upload
Insert an USB device into the USB host of the device.
Select Download Attlog
then press M/OK.
Downloading…
Data is downloaded.
Download Attlog (Download attendance data): Download all the attendance data from
the device to the USB device.
Download User (Download user data): Download all user information and fingerprint
templates from the device to a USB drive or an SD card.
Upload User (Upload user data):Upload user information and fingerprint templates from
a USB drive or an SD card to the device.
8. Reset
Reset settings such as device communication and system settings to factory settings.
Press
M/OK
on the initial
interface. Select System
and press M/OK.
Press
▲
/
▼
to select
Reset
Opts.Press
M/OK
to reset;
press ESC to exit.
This manual suits for next models
1
Table of contents
Other ZKTeco Touch Terminal manuals
ZKTeco
ZKTeco VT07-C22L User manual
ZKTeco
ZKTeco G2 User manual
ZKTeco
ZKTeco IN710 User manual
ZKTeco
ZKTeco SpeedFace - V5L User manual
ZKTeco
ZKTeco LPRS2000 User manual
ZKTeco
ZKTeco D3 Series User manual
ZKTeco
ZKTeco uFace Plus Series User manual
ZKTeco
ZKTeco SpeedFace V4LTI User manual
ZKTeco
ZKTeco ZK75 Series User manual
ZKTeco
ZKTeco iClock 885 User manual
ZKTeco
ZKTeco LockerPad-7B User manual
ZKTeco
ZKTeco ZPAD+ User manual
ZKTeco
ZKTeco IM20 User manual
ZKTeco
ZKTeco ZKBio930 User manual
ZKTeco
ZKTeco iFace Series User manual
ZKTeco
ZKTeco Green Label ProCapture-T User manual
ZKTeco
ZKTeco G5 User manual
ZKTeco
ZKTeco F305 User manual
ZKTeco
ZKTeco G4 User manual
ZKTeco
ZKTeco MB10-VL User manual
