Zippity ZP19022 User manual

701 Lawton Rd. , Charlotte NC USA 28216

Toll Free Phone: 1 877 234 6196 Fax: 704 631 4685

www.zippity-outdoor.com

Zippity Pet or Garden Enclosure Kit

(8’ x 8’ x 30”H)

ASSEMBLY INSTRUCTIONS

Ver 1.1/070116

NO DIG GARDEN FENCE & SCREENS

Zippity

91 1/8 in

94 1/8 in

36 7/8 in

Gate Opening

Ground

2 1/2 in

2 in

30 in

21 1/2 in

40 in

24 in

Top View Front View

Assembly Time ... 3 to 4 Hours Installation Time ... 2 to 3 Hours

2Zippity Pet or Garden Enclosure Kit Instructions

Check Box for These Contents

In the event of missing or defective parts please call our customer service department at

1 877 234 6196

(Mon. to Fri.8:00 AM to 4:00 PM EST).

Tools You Will Need

• Cordless Drill

• Level

• Hammer

• 1/16” Drill Bit

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e.shipping box) to avoid scratching.

• We recommend an area approx 5’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling components.

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

IMPORTANT: CHECK THE INSIDE OF THE LARGER PIECES IN YOUR BOX FOR OTHER MATERIALS

PACKED INSIDE.

NO DIG GARDEN FENCE & SCREENS

Zippity

Post Caps

(12)

2. Posts

(

9) - 1 1/2” x 7/8“ x 36 1/2”

Gate - Top Rail

(1) - 1 1/2“ x 1½” x 36 1/4“

4. Gate - Posts (2) - 7/8” x 1 1/2“ x 26 1/2”

5. Gate - Bottom Rail

(1) - 1 1/2” x 1 1/2“ x 36 1/4”

Gate Wing - Top Rails

(2) - 1 1/2” x 1 1/2“ x 27”

7. Gate Wing - Bottom Rails

(

2) - 1 1/2” x 1 1/2“ x 27”

Gate Wing Post with Wood Insert

(1) - 7/8” x 1 1/2” x 43 1/2”

9. Gate Hardware Kit (1)

10.

Fence - Top Rails

(3) - 1 1/2” x 1 1/2“ x 91”

11.

Fence - Bottom Rails

(3) - 1 1/2” x 1 1/2“ x 91”

12.

Pickets

- 1 - (52) 1 1/2” x 1/4“ x 26 3/8“

13.

Pickets

- 2 - (8) 1 1/2” x 1/4“ x 24 1/8”

14.

Pickets

- 3 - (8) 1 1/2” x 1/4“ x 22 7/8”

15.

Pickets

- 4 - (8) 1 1/2” x 1/4“ x 22 1/8”

16.

Pickets

- 5 - (4) 1 1/2” x 1/4“ x 21 7/8”

17. Corner Brackets (4)

18.

3/4” Self-Auguring Stainless Steel Screw

(63)

19.

2” Self-Auguring Stainless Steel Screw

(8)

15141312 16

151413 16

Not to Scale

18 19

Not to Scale

STEP ONE

Zippity Pet or Garden Enclosure Kit Instructions

Unboxing

When unboxing, please refer to page 2 to identify and separate

all your parts and pieces into three different groups.

Note: The pickets will have numbered

stickers at the bottom.

x 3

x 2

NO DIG GARDEN FENCE & SCREENS

Zippity

Picket Count:

14 @ #1

2 @ #2

2 @ #3

2 @ #4

1 @ #5

Picket Count:

5 @ #1

Picket Count:

2 @ #2

2 @ #3

2 @ #4

1 @ #5

Gate Gate Wings

Back & Side Panels

Note: One of the Gate Wing

Post is longer and

includes wood.

See Page 9 for more

Details.

Zippity Pet or Garden Enclosure Kit Instructions

Gate Assembly

Identify the gate top and bottom rail.

Insert the gate posts into the routered holes as shown.

Note that the tab is at the top.

Align the pre-drilled holes on the rails with the pre-drilled

holes on the post and fasten each intersection with two

short screws (one from the front and one from the back)

except for the front right on the top rail - this is where the

latch will eventually go.

STEP TWO

Gate Top Rail

Gate Bottom Rail

Top

Bottom

Top

Bottom

Note: Post Tabs

Align Holes

NO DIG GARDEN FENCE & SCREENS

Zippity

Tip!

Shine an LED light from your smart phone or flashlight

down the end of the posts to help identify alignment of

pre-drilled holes if necessary.

Small holes routed through the top and bottom of the rail.

Small holes only routed through the top of the rail.

Note: No Pre-drilled Hole

Latch will eventually be

installed here.

Zippity Pet or Garden Enclosure Kit Instructions 5

Gate Assembly

Square the gate frame together as shown.

Lock the corner together using one of the corner brackets

followed by four short screws as shown.

Repeat for all 4 inside corners of gate frame as illustrated.

STEP TWO

Square

NO DIG GARDEN FENCE & SCREENS

Zippity

Zippity Pet or Garden Enclosure Kit Instructions

Gate Assembly

One by one, slide the pickets through the routered holes

as shown.

Note the different lengths of pickets.

Install top post caps.

Push down on caps to lock it to vinyl post.

STEP TWO

Picket #5

Picket #4

Picket #3

Picket #2

NO DIG GARDEN FENCE & SCREENS

Zippity

Note: Once inserted, the

pickets will lock into place.

To remove the picket(s),

gently insert a butter knife

along the picket direction

as shown and slowly pull up

the picket(s).

Zippity Pet or Garden Enclosure Kit Instructions 7

Gate Hardware Installation

Center and align a hinge around the top rail as shown.

To ensure a proper fit and function, firmly wrap the hinge

around the front face and end of the rail as shown.

Fasten the hinge to the gate rail using two of the screws

Repeat for second hinge on gate bottom rail.

To install finger latch, center and align the finger latch as

shown.

Fasten finger latch into the top rail using four of the screws

from the hardware kit.

STEP THREE

ALL HOLES FOR GATE HARDWARE MUST

BE PRE-DRILLED USING A 1/16” DRILL BIT

Zippity Pet or Garden Enclosure Kit Instructions

Gate Wing Bottom Rail

Top

Bottom

Gate Wings Assembly

Identify the gate wing top and bottom rails.

Insert the gate wing posts into the routered holes as shown.

Note that the tab is at the top.

Align the pre-drilled holes on the rails with the pre-drilled

holes on the post and fasten each intersection with two

short screws (one from the front and one from the back)

STEP FOUR

Gate Wing Top Rail

Top

Bottom

Note: Post Tabs

Align Holes

NO DIG GARDEN FENCE & SCREENS

Zippity

Small holes routed through the top and bottom of the rail.

Small holes only routed through the top of the rail.

Zippity Pet or Garden Enclosure Kit Instructions 9

Gate Wings Assembly

One by one, slide the pickets through the routered holes

as shown. Note: Use pickets labeled “1”

Repeat for second gate wing.

STEP FOUR

Picket #1

NO DIG GARDEN FENCE & SCREENS

Zippity

One of the longer gate wing post will have a wood insert.

This post will be used to support the gate hinge as shown.

Zippity Pet or Garden Enclosure Kit Instructions

Fence Panels Assembly

Identify the fence panel top and bottom rails.

Insert the fence panel posts into the routered holes as shown.

Note that the tab is at the top.

STEP FIVE

Fence Panel Top Rail

Top

Bottom

Note: Post Tabs

NO DIG GARDEN FENCE & SCREENS

Zippity

Fence Panel Bottom Rail

Top

Bottom

Small holes routed through the top and bottom of the rail.

Small holes only routed through the top of the rail.

Table of contents

Other Zippity Fencing & Gate manuals

Zippity

Zippity WF29006 User manual

Zippity

Zippity Hampton ZP19012 User manual

Zippity

Zippity ZP19052 User manual

Zippity

Zippity WASHINGTON ZP19049 User manual

Zippity

Zippity ZP19063 User manual

Zippity

Zippity ALL AMERICAN VINLY PICKET GATE ZP19043 User manual

Zippity

Zippity Manchester ZP19018 User manual

Zippity

Zippity MANCHESTER VINYL PICKET FENCE KIT Quick start guide

Zippity

Zippity Manchester Vinyl Picket Gate with Posts Operation instructions

Zippity

Zippity ZP19056 User manual

Zippity

Zippity ZP19017 User manual

Zippity

Zippity Madison Gate Kit w/ Fence Wings User manual

Zippity

Zippity Baskenridge Vinyl Gate Kit w/ Fence Wings User manual

Zippity

Zippity ZP19019 User manual

Zippity

Zippity NEWPORT User manual

Zippity

Zippity Baskenridge Quick start guide

Zippity

Zippity BELLA User manual

Zippity

Zippity ZP19055 User manual

Zippity

Zippity Highland User manual

Zippity

Zippity ZP19056 User manual

Zippity

Zippity WILMINGTON User manual

Zippity

Zippity ROGER RABBIT User manual

Zippity

Zippity WILMINGTON ZP19008 User manual

Zippity

Zippity ALL AMERICAN PRIVACY SCREEN User manual

Popular Fencing & Gate manuals by other brands

Casanoov

Casanoov KIT-000045 instruction manual

Heras

Heras SHB21 installation manual

Casanoov

Casanoov VOGEL 350C140 manual

DITEC

DITEC Silver 1B/40B Installation and maintenance manual

Casanoov

Casanoov EIGER 350C140 manual

Olli

Olli Lister WZG 180B operating instructions

WamBam

WamBam BL19042 Assembly instructions

Wisniowski

Wisniowski MakroPro 100 Assembly and operating instructions

Roger Technology

Roger Technology LT338 Assembly instructions

CAI

CAI SG-60-PCY installation instructions

Hahn

Hahn hanit Installation Recommendations

Oxgard

Oxgard K-14 Operation manual

patura

patura P4500 Installation and mounting instructions

Betafence

Betafence HoriZen Prime installation manual

VIEWRAIL

VIEWRAIL Vedera installation guide

Alvarado

Alvarado CSG Installation and maintenance instructions

RTL

RTL INSTABOOM LITE manual

IKC

IKC HW00571 installation manual