Z-Wave CT100 User manual

Product Name: CT101

Document Title: CT101 Operation Guide

Document Type Code: IBOE

Part Number: 1111-002-002

28dec11 edits mtf

22nov11 initial rel mtf

5Jan12 DG Edits add FCC/IC page

Blank page remove

before binding

NOTE: Append this Operation

IB to the Install IB to make one

IB-booklet. Need a divider tab

between the 2 sections.

PG 1

Operation Guide CT100

The CT100communicatingZ-Wave3thermostatoperatesviaahigh-

quality,easy-to-usetouchscreen.TosetoradjustyourCT100,simply

touch your nger rmly to the screen. The screen will automatically

light up and you will hear a “beep.” Do not use a sharp or metallic

device; it will scratch the screen.

ENGLISH

Statement of use: 100% Compatible with all popular

residential HVAC systems; 24VAC single, two stage

conventional heating systems (gas/oil/electric), heat pumps,

single stage or with auxilliary heat (electric or fossil), zoned

forced air and zoned hot water (2 or 3 wire), millivolt systems

(with a 12-24 AC or DC source), one or two stage cooling, and

hybrid systems.

1105-002-003

Save

Energy

button

Power Grid

status

indicator

top cover

Touch screen

Wire

terminals

Mode

button

butto

PROG

butto

Reset

button

HVAC

selections

switches

bottom

cover

PG 2

Control Screens HOME Screen

Before you operate the CT100 please get familiar with these basic control screens. All the CT100

functions are accessed through these screens: HOME, MENU, PROGRAM and MANUAL. The

CT100 touch screen technology allows you to select (by touching) an item and change it using the +/-

arrows or the time arrows.

The HOME screen is displayed when

the unit is operating. Touching the

HOME icon on another screen

will always return you to this screen.

To set a Mode:

Press the mode button on the side.

The CT100 will step through the

modes HEAT, OFF, and COOL in

order. The LCD shows what mode

you are in.

DAY

LINK

RADIO

TARGET TEMP

COOL

AUTO

Thermostat

Mode

Time

of day

Current Room

Temperature

Radio

indicator

Lock

status

Fan

status

Time

Slot

Target

Temperature

Day

PG 2

PG 3

MENU Screen The MENU screen is the gateway to many functions or settings of the

CT100. It is displayed when you press the MENU button. [See page 10 for details]

Set Day

Touch this area to set

the day of the week.

Set Time

Touch this area to set

the time of day.

Left arrow goes back,

right arrow goes forward.

Calibration control

Use this to calibrate your

LCD display match to

another thermometer.

Set

C -

Touch this

to set temp

display units.

Lock Program

Touch for 5 sec

to lock or unlock.

Filter Timer

set

Touch and hold

5 sec to change.

Chirp set

Touch this to turn the

audible chirp on or off.

Temperature

Swing set

Differential to set

for 2nd Stage start.

Return

HOME

screen.

HVAC SETUP

Touch this in OFF mode to

�

configure the unit to work with

your HVAC system.

DIFF

SWING

FILTER

HVAC

SETUP

CALIBRATE

PG 4

MANUAL Screen The Manual Screen control screen is where you can make

temporary changes to your CT100’s operation. From the Full HOME screen, touch the main

temperature display to use this screen. [See page 13 for details]

yyg

HOLD

EMER

HOLIDAY

HEAT

Target

Temperature

Room

Temperature

Return HOME

Temp Up / Temp Down arrows

Touch these to raise and lower

the manual override Target Temp.

HOLIDAY

Touch this to invoke a

single program that repeats day

after day until you turn it off.

Manual Override Indicator

Shows TEMPORARY when

you have modified the Target Temperature

EMER heat for

HEAT PUMP systems.

TEMPORARY

HOLD Touch this area to operate the thermostat as

a manual thermostat. It will keep the temperature

ou set until ou chan e it or cancel HOLD.

PG 4

PG 5

Initial Settings

Press MENU to to access the following commands (from HOME screen).

Set day of the week

Touch the Day of the week area to cycle through the days of the week to select the current day.

Set time of day

Touch the Time of Day arrows to move the time selection forward or backward until it

displays the current time. Touch and hold for faster setting.

Set oF-oC display

Touch the oF and it will toggle to oC.

Set audible chirp

Touch the musical note icon to select the chirp

or no chirp.

Return HOME by touching the home icon.

ForwardBackward

emp.

ouch this to invoke a

PG 6

MENU Screen Functions

Press MENU to bring up MENU screen.

TIME of DAY

Touch the left (down) or right (up) arrows next to the time display to set the current time (1 minute per

touch). Touch and hold the arrow for fast time set (15 minute jumps).

DAY of Week Touch DAY area to select present day.

SWING (HVAC cycling rate) This feature allows you to set the desired variance in temperature

between the CT100 setting and the room temperature required before the heating or cooling system

will turn on—from 0.5° to 2.0° F (.25° to 1° C). For example, if SWING is set to 2.0° F and the CT100

is set to 70°F Target Temperature, the heat cycle will start when room temperature drops to 68°F.

Similarly, the cooling system will start when the room temperature increases to 72°F. The HVAC then

runs and will shut off at the Target Temperature.

To set SWING:

Touch SWING.

Touch the left/right arrows to set the SWING from 0.5° to 2.0°F.

The HVAC will run more frequently at .5°F and less at 2°F. Default is 1°F.

Touch to return to the MENU screen.

PG 6

PG 7

Chirp set - Touch this to turn the audible chirp sound on or off.

Set - Touch this to switch the temperature display scale from oF to oC .

FILTER - AIR FILTER ALERT - The CT100 can be programmed to remind you when the HVAC

sytem’s air lter needs changing.

Touch FILTER. The display will show the usage to date.

Touch FILTER for over 3 seconds and the display will change to LIMIT.

Touch arrows to set desired usage limit before lter alert comes on home screen.

When this limit is reached, FILTER will be on home screen and the CHECK FILTER indicator lights.

Limit may be set from 0 to 999 days/99 weeks; default is 90 days/12 weeks. Touch to reset.

To reset the usage back to 0, touch usage number; touching it again restores the displayed usage.

Touch to return to the MENU screen.

LOCK (The CT100 has 2 lock modes)

Touch icon for 5 seconds; the unit will go into the PARTIAL lock mode. The user can temporarily

override the CT100 target with the +/- buttons only. (1 bar)

PG 8

For FULL lock : Touch the (1 bar) icon again for 5 seconds to go to full lock. No changes can be

made in full lock (2 bars). Once locked, the CT100 will respond just to MENU.

To UNLOCK , Press MENU.

Touch and hold icon for 5 seconds for 2 bars (if not there already).

Then touch and hold the icon for another 5 seconds.

Each 5 second touch and hold must be separate.

Touch to return to the Home screen.

CALIBRATE

Your thermostat was accurately calibrated at the factory to ±1° F of actual ambient

temperature. You do have the option, however, to change the display temperature to match that of a

previous thermostat, or to match another thermostat already in your home. The range of change is

from -6°F to +6°F or -3°C to +3°C.

To change your Thermostat Calibration, touch MENU and then touch CALIBRATE.

Use the + / - to adjust the displayed temperature up or down, as desired.

The DELTA FACTOR that appears on the screen will also automatically increase or decrease

for each 0.5° (F or C) adjustment so you can see your change. The large display will show the

modied temerature reading that will be displayed on the HOME screen and used as the new room

temperature.

PG 8

PG 9

Touch to return to the Home screen.

DIFF (Used for 2 stage normal or heat pump with auxiliary only, not on screen for single stage)

The differential is the number of degrees between the room temperature and the Target Temperature

at which the 2nd stage will be used. Default is 2°F.

Touch MENU and then DIFF. Use the arrows to set the DIFF.

Recommend 2°F for very cold climates and the 4°F for warm climates.

MANUAL Screen Functions

The CT100 has 4 manual override commands. The manual screen is accessed by touching the large

current temperature display in the middle of the HOME screen.

IMPORTANT: The Mode must be in HEAT or COOL to access the manual screen.

TEMPORARY override Touch the + / - arrows to select your desired temporary Target Temperature.

Touch HOME to return to operation. The TEMPORARY icon will display indicating you have modied

the Target Temperature for the current Time Slot only. It goes back to the program target at the next

period. Also, when in TEMPORARY, if the target is set the same as the programmed target for that

period, the word TEMPORARY will go out.

Other manuals for CT100

This manual suits for next models

Table of contents

Other Z-Wave Thermostat manuals

Z-Wave

Z-Wave T100R User manual

Z-Wave

Z-Wave SR-ZV9092A User manual

Z-Wave

Z-Wave LinkedGo ST1000EZ0 User manual

Z-Wave

Z-Wave ZTS-110 Z-Thermostat User manual

Z-Wave

Z-Wave CT100 User manual

Z-Wave

Z-Wave ZTS-110 Z-Thermostat User manual

Z-Wave

Z-Wave 5430499 User manual

Z-Wave

Z-Wave ZTS-100 User manual

Z-Wave

Z-Wave ZTS-500 User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide