Yealink T29G User manual
Yealink T29G Quick Reference Guide : 1
Layout and Features
LCD Screen
Power Indicator
Line Keys
Soft Keys
Navigation Keys
• Scrolling info
• Confirm/Answer Calls
• Cancel/Reject Calls
Message Key
Headset Key
Hold Key
Transfer Key
Redial Key
Mute Key
Conference Key
Speakerphone Key
Volume KeyKeypad
Speaker
Hookswitch Tab
Hookswitch
Yealink T29G Quick Reference Guide : 2
PLACING A CALL
ANSWERING A CALL
Using the Handset
• Pick up the Handset
• Enter the number, then press Send soft key
Using the Speakerphone
• With the handset on-hook, press
• Enter the number, then press the Send soft key
Using the Headset
• With the headset connected, press to activate the headset mode
• Enter the number, then press the Send soft key
Using the Handset
• Pick up the Handset
Using the Speakerphone
• Press the Speakerphone key.
Using the Headset
• Press the Headset key.
Note: During a call, you can alternate between the headset, hands-free speakerphone and
handset modes by pressing the HEADSET key, the Speakerphone key or by picking up the
handset. Headset mode requires a headset connected.
Note: You can reject an incoming call by pressing the Reject soft key.
Yealink T29G Quick Reference Guide : 3
ENDING A CALL
Using the Handset
• Hang up the Handset, or press the EndCall soft key
Using the Speakerphone
• Press the ; or the EndCall soft key
OR Using the Headset
• Press the EndCall soft key
REDIAL
•
Press Redial key to enter the Placed Calls list, press or to select the desired
entry, and then press Redial key or the Send soft key.
CALL MUTE AND UNMUTE
•
Press the Mute key to mute the microphone during a call.
•
Press the Mute key again to un-mute the call.
Yealink T29G Quick Reference Guide : 4
CALL HOLD AND RESUME
To place a call on hold
• Press the Hold key or the Hold soft key during an active call.
To resume the call, do one of the following:
• If there is only one call on hold, press the Hold key or the Resume soft key.
If there is more than one call on hold
• Press or to select the desired call, then press the Hold key or the Resume
soft key.
Yealink T29G Quick Reference Guide : 5
CALL TRANSFER
You can transfer a call in the following ways:
Blind Transfer
• Press the Transfer key or the Transfer soft key during a call. The call is placed on hold.
• Enter the number you want to transfer to.
• Press the Transfer key or the B Transfer soft key.
Semi-Attended Transfer
• Press the Transfer key or the Transfer soft key during a call. The call is placed on hold.
• Enter the number you want to transfer to, and then press the Send soft key.
• Press the Transfer key or the Transfer soft key when you hear the ring-back tone.
Attended Transfer
• Press the Transfer key or the Transfer soft key during a call. The call is placed on hold.
• Enter the number you want to transfer to, and then press the Send soft key.
• Press the Transfer key or the Transfer soft key when the second party answers.
Yealink T29G Quick Reference Guide : 6
CALL CONFERENCE
Call Conference
• Press the Conference key or the Conference soft key during an active call.
The call is placed on hold.
•
Enter the number of the second party, and then press the Send soft key.
•
Press the Conference key or the Conference soft key again when the second party
answers. All parties are now joined in the conference.
•
Press the EndCall soft key to disconnect all parties.
CALL FORWARD
To enable call forward
• Press the
• Enter the number you want to forward to. For No Answer Forward, press or to
select the desired ring time to wait before forwarding from the After Ring Time field.
• Press the Save soft key to accept the change.
• Select the desired forward type:
Always Forward - Incoming calls are forwarded unconditionally.
Busy Forward - Incoming calls are forwarded when the phone is busy.
No Answer Forward - Incoming calls are forwarded if not answered after a period of time.
Menu soft key when the phone is idle and then Features > Call Forward
Note: You can split the conference call into two individual calls by pressing the Split soft key.
Yealink T29G Quick Reference Guide : 7
SPEED DIAL
To configure a speed dial key:
• Press the Menu soft key when the phone is idle, and then select Features->DSS Keys.
•Select the desired DSS key, and then press the Enter soft key.
•Select SpeedDial from the Type field, select the desired line from the Account ID field,
enter a label in the Label field and then enter the number in the Value field.
• Press the Save soft key to accept the change.
To use the speed dial key:
• Press the speed dial key to dial out the preset number.
VOICE MESSAGE
• Message waiting indicator on the idle screen indicates that one or more voice
messages are waiting at the message center. The power indicator LED slowly flashes
red and the MESSAGE key LED lights up.
To listen to voice messages:
• Press the Message key or the Connect soft key.
• Follow the voice prompts to listen to your voice messages.
CUSTOMIZING YOUR PHONE
Call History
• Press the
Contact Directory - Adding a contact
• To add a contact, press the Dir soft key when the phone is idle, then select All Contacts.
• Press the Add soft key to add a contact.
• Enter a unique contact name in the Name field, and enter the phone number in the proper field.
• Press the Add soft key to accept the change.
History soft key when the phone is idle
• Press or to scroll through the list.
• Select an entry from the list, you can do the following:
• Press the Send soft key to call the entry
• Press the Delete
• If you press the Option soft key, you can also do the following:
• Select Detail to view detailed information about the entry.
• Select Add to Contact to add the entry to the local directory.
• Select Add to Blacklist to add the entry to the blacklist.
• Select Delete All to delete all entries from the list.
soft key to delete the entry from the list
Yealink T29G Quick Reference Guide : 8
CUSTOMIZING YOUR PHONE
Contact Directory - Editing a contact
• Press the
• Press or keys to select the desired entry, press the Option soft key and then select Detail.
• Edit the contact information.
• Press the Save soft key to accept the change.
Directory soft key when the phone is idle, and then select All Contacts.
Directory soft key when the phone is idle, and then select All Contacts.
Yealink T29G Quick Reference Guide : 9
Contact Directory - Deleting a contact
• Press the
Volume Adjustment
• Press during a call to adjust the receiver volume of the handset/speakerphone/headset.
when the phone is idle or ringing to adjust the ringer volume.
• Press or keys to select the desired entry, press the Option soft key and then select Delete.
• Press the OK soft key when the LCD screen prompts “Delete selected item?”.
Press or to select Common or the desired account and then press the Enter soft key.
Note: You can add contacts from call history easily. For more information, refer to Call History above.
• Press
to adjust the media volume in the corresponding screen.• Press
Ring Tones
• Press the Menu soft key when the phone is idle, and then select Settings->Basic Settings->
Sound->Ring Tones.
• Press the Save soft key to accept the change.
•
Press or to select the desired ring tone.•
Other manuals for T29G
2
Table of contents
Other Yealink IP Phone manuals
Yealink
Yealink T4s User manual
Yealink
Yealink Yealink SIP-T22P User manual
Yealink
Yealink T58W Pro User manual
Yealink
Yealink T41P Skype User manual
Yealink
Yealink T41S User manual
Yealink
Yealink T48G-SKYPE FOR BUSINESS EDITION User manual
Yealink
Yealink T42G User manual
Yealink
Yealink VP59 Teams Service manual
Yealink
Yealink SIP-T48S User manual
Yealink
Yealink Yealink SIP-T20P User manual
Yealink
Yealink T46S Skype for Business Product information sheet
Yealink
Yealink Yealink SIP-T46G User manual
Yealink
Yealink SIP-T22 User manual
Yealink
Yealink SIP-T19 E2 T4 Series User manual
Yealink
Yealink W56P Telesystem User manual
Yealink
Yealink T42S User manual
Yealink
Yealink Yealink SIP-T48G User manual
Yealink
Yealink SIP-T4X User manual
Yealink
Yealink T48 User manual
Yealink
Yealink SIP-T3xG Programming manual
