YAT LCS31010 User manual
1
R
CUS
244026
LITHIUM-ION BATTERY PACK
LCS31010
(TEL)
0573-83225888-521
(Http)
www.yattool.com ,
K
!"
CorelDRAW 14.0
Us005
A4,210x290mm
2012/11/13
#$
8458-4301008-051
80
%&
18 A4'
2
2
Call our customer service help
line at 1-800-313-5111 for assistance.
WARNING: The batteries in this product may contain one
or more of the following chemicals known to the State of
California to cause cancer and birth defects or other reprod-
uctive harm: lead, nickel, cadmium, lithium, cobalt.
Wash hands after handling.
WARNING: Some dust and debris created by the use of this
tool could contain chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm.
Some examples of these chemicals are:
* chemicals in fertilizers
* compounds in insecticides, herbicides and pesticides
* arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending
on how often you do this type of work. To reduce your expo-
sure, work in a well-ventilated area and with approved safety
equipment, such as dust masks that are specially designed to
filter out microscopic particles.
WARNING: The electrical cords on this product may contain
chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. Wash hands
after handling.
3
3
Combination Hex Key/Screwdriver
Loosen the guide bar screw counterclockwise with the hex key end of
the tool. (2)
Tighten the chain tensioner clockwise with the screwdriver end
of the tool. (8)
Tighten the guide bar screw clockwise with the hex key end of the
tool, but leave the bar free to move for tension adjustment. 9()
Remove all slack from the chain by turning the chain tensioner
clockwise with the screwdriver end of the tool until the chain seats
snugly against the bar with the drive links in the bar groove. 10()
Tighten the guide bar screw clockwise with the hex key end of the
tool.(11)
Remove the combination hex key/screwdriver from the saw. (1)
Replace
INSTALLING/REPLACING THE GUIDE BAR AND CHAIN
4
4
INSTALLING/REPLACING THE GUIDE BAR AND CHAIN
5
5
Remove the battery pack
. Call our custo-
mer service help line at
1-800-313-5111 for assi-
stance.
6
6
7
7
8
8
9
9
30 60 minutes- 9
four
9
1
TO CHARGE – SEE CHARGER MANUAL FOR COMPLETE INSTRUCTIONS
lithium-ion
li-ion
li-ion
li-ion
60 minutes
Call customer service
helpline at 1-800-313-5111 for assistance.
50 100
10
10
call our custo-
mer service help line at 1-800-313-5111 for assistance.
a qualified individual
bar and
Unused SAE30 weight motor oil may be substituted.
our customer service help line at 1-800-313-5111
for assistance.
and chain oil,
Other YAT Chainsaw manuals
