Xplova NOZA User manual
Xplova NOZA
NOZA BIKE POWER TRAINER
Quick Start Guide
NOZA 單車功率訓練台
快速入門手冊
NOZA バイク パワー トレーナー
クイック スタート ガイド
NOZA 자전거 트레이너
빠른 시작 안내서
TABLE OF CONTENTS
Knowing your NOZA .................................................................................................1
Package contents ...................................................................................................1
Introduction of product appearance ........................................................................2
Assembly descriptions .............................................................................................3
Assembling the Xplova NOZA ................................................................................3
Attaching the cassette (sold separately) .................................................................4
Mounting your bicycle .............................................................................................5
Specifications ..........................................................................................................6
Safety precautions and regulations ........................................................................7
Safety precautions before use ................................................................................7
Notices ....................................................................................................................7
Disclaimer ...............................................................................................................8
Maintenance and care ............................................................................................8
Federal Communications Commission (FCC) Statement .......................................8
CE Complaince Statement ......................................................................................9
Xplova Limited Product Warranty Policy .................................................................9
Knowing your NOZA
EN-1
EN
KNOWING YOUR NOZA
Package contents
Note: Accessories may vary by country or region.
Front bottom tube Rear bottom tube
Xplova NOZA bike trainer main unit Bolt x2 / Nut x2 1.8mm cassette
washer
Tuning knob – for
front/rear bottom
tubes adjustment
and tightness
Quick release kit Open-end wrench Power adapter
Adapter A –
for quick release
cassette nut
Adapter B –
for quick release
130mm/135mm
Adapter C –
for thru axle
cassette nut
Adapter D –
for thru axle
12x142/
12x148mm
Knowing your NOZA
EN-2
EN
Introduction of product appearance
Tuning knob
Flywheel
LED indicator
Front bottom tube Power cord connector
Assembly descriptions
EN-3
EN
ASSEMBLY DESCRIPTIONS
Assembling the Xplova NOZA
1. Flip the box and open the bottom of the box.
Take the Xplova NOZA main unit and
Styrofoam packaging out of the box at the
same time.
2. Remove the front and rear bottom tubes from
the sides of the Styrofoam packaging.
(DO NOT open the Styrofoam packaging at
both sides.)
3. Take out the bolts and insert them into the bolt
holes on the main frame.
4. Put the front and rear bottom tubes on the main
frame, then push the bolts into bolt holes.
5. Use the wrench to tighten the nuts.
6. Flip the entire Styrofoam packaging
to make the Xplova NOZA bike
trainer stand upright on the floor
where it will be used. Remove the
Styrofoam packaging on both sides
to complete assembly of the bike
trainer.
7. Install the cassette (sold separately)
into the cassette body and lock the
cassette nut to prevent loosening.
Attention:
The Xplova NOZA bike trainer cassette body is compatible with Shimano
and SRAM cassette which can be directly installed with an 11-speed
cassette. If you are using a non-11-speed cassette, please fit the
cassette washer on the bottom of the cassette body first before installing
the cassette.
Assembly descriptions
EN-4
EN
Attaching the cassette (sold separately)
•Attaching a compatible 11-speed
cassette
Attach the cassette onto the cassette
body manually and use the cassette nut
to secure it on the cassette body. Use the
cassette removal socket to secure it
tightly on the NOZA cassette body (the
tool is not included).
•Attaching a 9-speed or 10-speed
cassette
Before attaching a 9-speed or 10-speed
cassette, you need to put the 1.8mm
cassette washer onto the cassette body
first and then secure the cassette tightly
on the NOZA cassette body as
mentioned above.
•130mm or 135mm quick release
installation
When installing on a quick release
bicycle frame, you need to use adapter A,
adapter B and the quick release kit (these
three accessories are included in the
package). Please refer to the figure on
the right for the installation.
•142mm or 148mm thru axle
installation
When installing on a thru axle bicycle
frame, you need to use adapters C and D
(the two accessories are included in the
package). Please refer to the figure on
the right for the installation.
Please use the supplied power adapter
and plug one end into a wall outlet.
Connect the other end to the power jack
on the bike trainer as shown in the figure
on the right.
Assembly descriptions
EN-5
EN
Mounting your bicycle
Shift the chain on your bicycle to the smallest sprocket of the cassette and then
remove the rear wheel. Align the bicycle chain with the smallest sprocket of the
cassette and then put on the chain as well as mount the bicycle on NOZA's axle to
have the bicycle in a suitable position for riding.
Please use the bicycle quick release lever properly with care. When the arc of the
rotating arm of the quick release lever is toward outside, it means the lever is in a
released state. Rotate the rotating arm of the lever clockwise to tighten the quick
release lever. The rotating arm of the quick release lever should be placed on the
other side of the NOZA's cassette.
Please refer to the following figure for the installation of the thru axle bicycle. Insert
the thru axle from the other side of the cassette and tighten the axle.
Attention:
1. Please firmly tighten the quick release lever and the thru axle to
prevent damage to property or human body. If you cannot tighten the
quick release lever and the thru axle, please contact your dealer or
Xplova customer service. Please DO NOT attempt to use the NOZA
in this situation.
2. When mounting the bicycle, please lift its front wheel and press the
frame down to make the bicycle firmly mounted on the NOZA.
Assembly descriptions
EN-6
EN
Indicator descriptions
When the bike trainer is powered on, the indicator will light red first to indicate that the
control panel is conducting self diagnostics and auto zeroing. When the indicator is
blinking green, it means the control panel has finished self diagnostics and auto
zeroing and is entering standby mode to get ready for riding.
Specifications
No. Indicator status Status description Notice and remark
1 Red Control panel self
diagnostics and auto
zeroing in progress
•Normally, the process will
complete in 2-4 seconds after
it is powered on.
•Please DO NOT use the bike
trainer before auto zeroing
and self diagnostics are
completed to avoid power
measurement deviations.
2Blinking green Self diagnostics and
auto zeroing completed
Can connect to software.
3 Solid green Bluetooth is connected Connected to a Bluetooth device
and paired successfully.
4Blue The bike trainer is
active and providing
power normally
When connecting to Bluetooth or
ANT+ devices, it will light blue
during riding.
Dimensions (installed) 620 x 518 x 453 mm
Total Weight (unboxed) 16.5 KG
Flywheel Weight 5.7 KG
Sound Level 58 dB (@30KPH)
Max Power Output 2500 W (@58KPH)
Max Simulated Incline 18% (@70KG)
Accuracy ±2.5%
Drivetrain
Cassette not included.
Requires purchase/installation of new cassette: 8/9/
10/11 Speed SRAM/Shimano
Connectivity ANT+, ANT+ FE-C, and Bluetooth Smart
Firmware Upgradable Yes
Electrical Requirements 100 - 240 Volt, 1.5 A, 50 Hz - 60 Hz
Box Dimensions 598 x 275 x 565 mm
Safety precautions and regulations
EN-7
EN
SAFETY PRECAUTIONS AND REGULATIONS
Safety precautions before use
1. Specs of the Xplova NOZA power adapter are as follows:
•Input: 100 ~ 240 VAC / 1.5 A
•Output: 19 VDC / 4.7 A
•Power plug: External diameter 5.5 m/m; internal diameter 2.5 m/m; length 10~12
m/m
2. Only use the power adapter certified by the Xplova NOZA. Non-compliant power
adapters will cause irreparable damage to the bike trainer.
3. When the bike trainer is active, please do not touch it and you should keep non
users, animals or objects away from it to avoid danger.
4. Consult your coach before you start any training plans.
5. Please DO NOT put your hands or any object near the spinning parts of the
Xplova NOZA.
6. The flywheel/cassette of the Xplova NOZA might get hot after you use it for a
while. Please DO NOT touch the flywheel/cassette within a short time.
7. Please DO NOT attempt to disassemble the bicycle when the cassette is running.
8. When you are using the Xplova NOZA, keep your children and pets away from it to
prevent injury.
9. The Xplova NOZA can only be installed and used on a firm, level ground.
10. When training is in progress, please ride safely.
11. Keep away from water.
12. Before training, you should check if the bicycle is firmly secured to the Xplova
NOZA.
13. The Xplova NOZA can only be used after it is completely assembled.
14. When using the Xplova NOZA, you can only use accessories and power adapters
certified by Xplova.
Notices
1. Xplova shall not be held responsible for users using software, applications and
devices from other companies that result in malfunctioning of the Xplova NOZA.
2. As ANT+™ and Bluetooth are mutually exclusive, it is impossible for the Xplova
NOZA to send data simultaneously through ANT+™ or Bluetooth, i.e., when one
of the protocols is in use, the Xplova NOZA will automatically stop the other
protocol to avoid the possibility of causing NOZA programs to misbehave.
3. Radio devices may cause interference and may change or completely prevent the
Xplova NOZA from functioning normally. Therefore, when training using the
NOZA, it is advised to stay away from high voltage power lines, traffic signals,
railway power lines, buses or trams.
Safety precautions and regulations
EN-8
EN
4. When the Xplova NOZA is not in use, make sure not to expose it to direct sunlight
for long periods of time.
Disclaimer
Attention! Xplova shall not be held responsible for temporary or permanent injury to
the user out of using the Xplova NOZA (either directly or indirectly).
Maintenance and care
1. When cleaning the bike trainer, please use neutral lubrication oil. DO NOT use
corrosive detergents.
2. DO NOT burnish the surface of the bike trainer or drill holes. Scratches or drilled
holes will lead to occurrence of cracks.
3. Please place the bike trainer indoors and keep it dry to avoid damage from
humidity.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with radio frequency (RF) exposure limits adopted by the
Federal Communications Commission for an uncontrolled environment. This
equipment should be installed and operated to ensure a minimum of 20 cm spacing to
any person at all times.
Other manuals for NOZA
1
Table of contents
Other Xplova Exercise Bike manuals
