Xplova NOZA User manual
Xplova NOZA ONE
NOZA ONE
BIKE POWER TRAINER
Quick Start Guide
NOZA ONE 單車功率訓練台
快速入門手冊
NOZA ONE バイク パワー トレーナー
クイック スタート ガイド
NOZA ONE 바이크 파워 트레이너
빠른 시작 안내서
NOZA ONE FAHRRADTRAINER
Kurzanleitung
NOZA ONE VÉLO STATIONNAIRE
Guide de Démarrage Rapide
NOZA ONE FIETSTRAINER
Beknopte Handleiding
RODILLO DE ENTRENAMIENTO PARA BICICLETA
NOZA ONE
Guía de Inicio Rápido
ROLO DE TREINO DE POTÊNCIA DE BICICLETA
NOZA ONE
Guia de Início Rápido
TABLE OF CONTENTS
Knowing your NOZA ONE ........................................................................................1
Package contents ...................................................................................................1
Product Appearance ...............................................................................................2
Assembly Instructions ..............................................................................................3
Assembly Instructions Notice ..................................................................................3
Assembling the Xplova NOZA ONE .......................................................................4
Mounting your bicycle .............................................................................................7
Indicator descriptions ..............................................................................................8
Cycling game QSG ..................................................... 9
Training program and uploading riding data ...........................................................9
More of the amazing functions ................................................................................9
Specifications ........................................................................................................10
Safety precautions and regulations ......................................................................11
Safety precautions before use ..............................................................................11
Notices ..................................................................................................................11
Disclaimer .............................................................................................................11
Maintenance and care ..........................................................................................12
Federal Communications Commission (FCC) Statement .....................................12
Xplova Limited Product Warranty Policy ...............................................................12
Knowing your NOZA ONE
EN-1
EN
KNOWING YOUR NOZA ONE
Q
Package contents
Rear bottom tube
Xplova NOZA ONE
bike trainer main unit
Front bottom tube
(Bolt and nut are
Included within it)
Rear bottom tube
bolt x2
Rear bottom tube
nut x2
Front bottom
wrench
Flywheel/cassette
cover bolt wrench
(2mm Hexagon)
Flywheel/cassette
washer
Decorative bolt
cover x2
Rear bottom
wrench
Flywheel/cassette
cover
Flywheel/cassette
cover bolt x2
Knowing your NOZA ONE
EN-2
EN
Notice: Accessories may vary by country or region.
Q
Product Appearance
Quick release kit Adapters for
QR&Thru-axle
Control module Control module
screw x2
Assembly Instructions
EN-3
EN
ASSEMBLY INSTRUCTIONS
Q
Assembly Instructions Notice
Front bottom tube installation
Install according to the direction shown in the figure, press the spring button during
installation, and rotate the front bottom tube slightly to make the spring buckle go
through any hole in the front bottom tube. Then tighten the bolts and the front bottom
tube can be installed.
Flywheel/cassette cover installation
After taking out the filler from the flywheel/cassette cover, first tighten the flywheel/
cassette cover onto the flywheel, and then lock the two screws, as shown in the figure.
* Note: 1. The flywheel cover plays a role
in protecting the machine, personnel
safety and aesthetics purpose, please be
sure to install it in place!
* Note: 2. For detailed installation
methods, please refer to the specific
chapters.
* Note: 1. The part marked in red is a
plastic pipe sleeve, which is installed to
prevent the metal pipes from rotating each
other, please do not discard it.
* Note: 2. The height of the trainer can be
adjusted through the spring button and the
installation of the two holes on the front
bottom tube to adapt to different training
models. The adaptation category is shown
in the figure.
Assembly Instructions
EN-4
EN
Q
Assembling the Xplova NOZA ONE
1. Open the packing box, remove the styrofoam top cover and take out the
installation tools and accessories from the accessory bag.
• For front bottom tube
installation use:
- Front bottom wrench
• For the installation of the rear
bottom tube:
- Rear bottom tube bolt x2
- Rear bottom tube nut x2
- Decorative bolt cover x2
- Rear bottom wrench
• For the installation of Flywheel/
cassette cover:
- Flywheel/cassette cover
- Flywheel/cassette cover
bolt x2
- Flywheel/cassette cover bolt wrench
• For the installation of control module:
- Control module
- Control module screw x2
2. Take out the NOZA ONE bike trainer main unit and front bottom tube from the
styrofoam cover and install according to the illustrations.
Xplova NOZA ONE
Bike trainer main unit
Front bottom tube
Diagram of completed front
bottom tube installation
TIP: Press down the spring button when
installing. When installation is done, make
sure the button goes through the locating
hole on the front leg.
Assembly Instructions
EN-5
EN
3. Put the front leg on the ground as a
support to lift the trainer, put rear bottom
tube bolt through the holes on the rear
bottom tube and secure it tightly to the
trainer main unit. Then use the rear bottom
wrench to screw the rear bottom tube nut
tight, and then install the decorative bolt
cover.
4. Tighten the bolts in the direction according
to illustration, screw tight the front bottom
tube. (Bolt and nut are included in the front
bottom tube)
5. After removing the filler from the flywheel/cassette cover, place the flywheel/
cassette cover in the direction shown in the figure below and tighten it, use the
flywheel/cassette cover wrench to tighten the two flywheel/cassette cover bolts.
6. Install the battery according to the
following diagram:
6.1. Take out the control module from the
accessory bag and put in two AAA batteries.
6.2. Put the control module into the main
beam according to the direction shown in the
figure.
6.3. Use a screwdriver to tighten the control
module screws to complete the battery
installation.
Assembly Instructions
EN-6
EN
Attention:
Discarded dry batteries should be disposed in time, please do not try to
disassemble them. Please remove the battery if the battery is not used
for a long period of time to avoid damage to the equipment due to battery
leakage.
7. Install the flywheel/cassette (sold separately) into the cassette body manually
and use the cassette nut to secure it on the cassette body, and lock the cassette
to prevent it from loosening.
Attention:
The cassette body of NOZA ONE bike trainer is compatible with
Shimano and SRAM cassette, an 11-speed cassette can be installed
directly. If you use a non-11-speed cassette, please install the cassette
washer into the bottom of the cassette body before installing the
cassette.
Assembly Instructions
EN-7
EN
Q
Mounting your bicycle
Shift the chain on your bicycle to the smallest sprocket of the cassette and then
remove the rear wheel. Align the bicycle chain with the smallest sprocket of the
cassette of NOZA ONE, and then put on the chain as well as mount the bicycle on
NOZA ONE's axle to have the bicycle in a suitable position for riding.
Please use the bicycle quick release kit properly with care. When the arc of the
rotating arm of the quick release kit is toward outside, it means the kit is in a released
state. Rotate the rotating arm of the kit clockwise to tighten the quick release kit. The
rotating arm of the quick release kit should be placed on the other side of the NOZA
ONE's cassette body.
Please refer to the following illustration for the installation of the thru axle bicycle.
Insert the thru axle from the other side of the cassette and tighten the axle.
Attention:
1. Please firmly tighten the quick release lever and the thru axle to
prevent damage to property or human body. If you cannot tighten the
quick release lever and the thru axle, please contact your dealer or
Xplova customer service. Please DO NOT attempt to use the NOZA
ONE under this situation.
2. When mounting the bicycle, please lift its front wheel and press the
frame down to make the bicycle firmly mounted on the NOZA ONE.
Assembly Instructions
EN-8
EN
Q
Indicator descriptions
NOZA ONE has two indicator lights, one indicates system status, the other indicates
communication status. See illustration for locations of the two indicator lights:
Categories Type of indicator light
Battery exhausted
System LED indicator light
off.
Bike trainer at sleep
mode
Low power
consumption mode
Working status
Not Connected ---
Communication indicator
light flashing slowly.
Connected ---
Communication indicator
light always on
Low battery
System indicator light
flashes in every 10
seconds.
Spindown
Alternate flashing of red
light and blue light. Blue
light will always on after
spindown completed.
Other manuals for NOZA
1
Table of contents
Languages:
Other Xplova Exercise Bike manuals
