Worx WT463 User manual
P07
P12
P20
P25
P32
P38
P45
P51
P58
P64
P70
P76
P83
P88
Jigsaw
Stichsäge
Scie sauteuse
Seghetto alternativo
Sierra de calar
Decoupeerzaag
Pilarka szablasta
Rezgőfűrész
Fierăstrău pendular
Přímočará pila
Priamočiara píla
Serra tico-tico
Pendelsticksåg
Vbodna žaga
WT463
EN
D
F
I
ES
NL
PL
HU
RO
CZ
SK
PT
SV
SL
Original instructions EN
Originalbetriebsanleitung D
Notice originale F
Istruzioni originali I
Manual original ES
Oorspronkelijke gebruiksaanwijzing NL
Instrukcja oryginalna PL
Eredeti használati utasítás HU
Instrucţiuni originale RO
Původní návod k používání CZ
Pôvodný návod na použitie SK
Manual original PT
Bruksanvisning i original SV
Izvirna navodila SL
14
35
6
78
9
2
10
12
11
A1 A2
C
E1
B
E2
G
D
F
1
2
1
2
1
2
1
2
H
I1
3
I2 J
19
K
A1 A2
C
E1
B
E2
G
D
F
1
2
1
2
WX478 WX479
1
2
1
2
H
I1
3
I2 J
19
K
A1 A2
C
E1
B
E2
G
D
F
1
2
1
2
WX478 WX479
1
2
1
2
H
I1
3
I2 J
19
K
Jigsaw EN
7
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power
tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected
supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair
and clothing away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of dust
collection can reduce dust-related hazards.
Jigsaw EN
8
h) Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second.
4) Power tool use and care
a) Do not force the power tool. Use
the correct power tool for your
application.The correct power tool will do
the job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power tool
or these instructions to operate the
power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding
of moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
5) Service
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts.This will
ensure that the safety of the power tool is
maintained.
JIG SAW SAFETY WARNINGS
1. Hold jig saw by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord. Cutting accessory contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
2. Use clamps or another practical way
to secure and support the workpiece
to a stable platform. Holding the
workpiece by hand or against your body
leaves it unstable and may lead to loss of
control.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Wear ear protection
Jigsaw EN
9
Wear eye protection
Wear dust mask
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
Before any work on the machine
itself, pull the mains plug from the
socket outlet.
Wear protective gloves
Wood
Aluminium
Metal
Plastic
Lock
Unlock
COMPONENT LIST
1. VARIABLE SPEED CONTROL
2. ON/OFF SWITCH
3. LOCK-ON BUTTON
4. SOFT GRIP HANDLE
5. ALLEN KEY
6. ANGLE PLATE
7. BASE PLATE
8. ROLLER GUIDE
9. PARALLEL GUIDE FIXING
10. FINGER PROTECTION GUIDE
11.
PENDULUM FUNCTION CONTROL
12. PARALLEL GUIDE *
*Not all the accessories illustrated or
described are included in standard
delivery.
TECHNICAL DATA
Type WT463 (460-479-designation of
machinery, representative of Jig Saw)
Rated Voltage 220-240 V~50 Hz
Rated power 650 W
Rated No-load speed 1000-3100 /min
Stroke length 20 mm
Bevel capacity ±45°
Protection Class /II
Cutting depth
Wood 90 mm
Aluminum 20 mm
Steel 8 mm
Weight 2.3 kg
NOISE INFORMATION
A weighted sound pressure LpA:87.4 dB(A)
Jigsaw EN
10
A weighted sound power LwA: 98.4 dB(A)
KpA & KwA 3.0 dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Cutting wood
Vibration emission value
ah= 5,074 m/s2
Uncertainty K = 1.5 m/s²
Cutting steel
metal
Vibration emission value
ah= 9,548 m/s2
Uncertainty K = 1.5 m/s²
The declared vibration total value and the
declared noise emission value have been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value and the
declared noise emission value may also be
used in a preliminary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the
power tool can differ from the declared value
depending on the ways in which the tool is used
especially what kind of workpiece is processed
dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being
cut or drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool
and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and
if any anti vibration and noise accessories are
used.
And the tool is being used as intended by its
design and these instructions. .
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING: To be accurate, an
estimation of exposure level in the
actual conditions of use should also take
account of all parts of the operating cycle such
as the times when the tool is switched off and
when it is running idle but not actually doing
the job.This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in
anti vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
Hex key 1
Metal cutting blade 1
Wood cutting blade 1
Aluminum cutting blade 1
Parallel guide 1
Vacuum adaptor 1
We recommend that you purchase your
accessories from the same store that sold you
the tool. Refer to the accessory packaging for
further details. Store personnel can assist you
and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for sawing wood,
plastic, metal and building materials while
resting firmly on the workpiece. It is suitable
for straight and curved cuts with mitre angles
to 45°.The saw blade recommendations are to
Table of contents
Languages:
Other Worx Power Tools manuals
Worx
Worx WX15RT.2 User manual
Worx
Worx WX152 User manual
Worx
Worx contour WX461 User manual
Worx
Worx WX543L User manual
Worx
Worx Sonicrafter WX693 User manual
Worx
Worx WX843 Series Installation manual
Worx
Worx WX473 User manual
Worx
Worx WX686L.1 User manual
Worx
Worx MakerX Installation manual
Worx
Worx WX106L User manual
Worx
Worx WX477 User manual
Worx
Worx Makerx WA7150 User manual
Worx
Worx Maker X WX743 User manual
Worx
Worx MAKER X WX743L Series User manual
Worx
Worx WX473 Installation manual
Worx
Worx LithiumDrive WU252 User manual
Worx
Worx WX680 User manual
Worx
Worx WX472 User manual
Worx
Worx WX843 Series Operation instructions
Worx
Worx WU465 User manual
