Worx WX152 User manual
WX152 WX152.1 WX152.2
WX152.3 WX152.4
P06
P14
P22
P30
P38
P46
P54
P62
P70
P78
P86
EN
D
F
I
ES
NL
PL
HU
RO
CZ
SK
Lithium-Ion Cordless Drill/Driver
Schnurloser Lithium-Ionen-Bohrer/Schraubendreher
Perceuse/Visseuse sans fil Lithium-Ion
Trapano/avvitatore con btteria agli ioni di litio
Taladro/atornillador con batería de iones de litio
Draadloze boor/schroevendraaier
Wiertarka bezprzewodowa
Lítium-Ion akkumulátoros fúró-csavarozó
Maşină de găurit/înşurubat cu acumulator litiu-Ion
Bezdrátová vrtačka/šroubovák s lithium-ionovou baterií
Akumulátorový vrták/skrutkovač s lítium-iónovým akumulátorom
1
2
3
4
5
7
6
8
9
A1 A2
19
F
E
B1
C1
A3
C2
D
B2
C3
1
2
1
2
2
1
A1 A2
19
F
E
B1
C1
A3
C2
D
B2
C3
1
2
1
2
2
1
6
Lithium-Ion Cordless Drill/Driver EN
1. KEYLESS CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK RELEASE BUTTON
7. BATTERY PACK *
8. SIGHT LIGHT
9. ON/OFF SWITCH
* Not all the accessories illustrated or described are included in standard delivery.
7
Lithium-Ion Cordless Drill/Driver EN
TECHNICAL DATA
Type WX152.2 WX152.3 WX152.1 WX152 WX152.4 (1-designation of machinery,
representative of Cordless Drill)
Voltage 16V Max*
No load speed 0-350/0-1350/min
Number of clutch positions 15+1
Max torque 30N.m
Chuck capacity 10mm
Max. drilling capacity Steel 10mm
Wood 25mm
Machine weight 1.24kg
* Voltage measured without workload. Initial battery voltage reaches Maximum of 16 volts.
Nominal voltage is 14.4 volts.
NOISE INFORMATION
A weighted sound pressure LpA: 75dB(A)
A weighted sound power LwA: 86dB(A)
KpA&KwA 3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Drilling into metal Vibration emission value ah,D< 2.5m/s2
Uncertainty K = 1.5m/s²
Screw driving without impact Vibration emission value ah< 2.5m/s2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
8
Lithium-Ion Cordless Drill/Driver EN
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually doing the job.This may
significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 100C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
WX152.2 WX152.3 WX152.1 WX152 WX152.4
Li-Ion battery pack(1.3 Ah) 2 2 / / 1
Li-Ion battery pack(2.0 Ah) / / 2 1 /
60min Charger 1 1 1 1 1
Double ended bits / 1 1 1 1
158pc Accessories 1 / / / /
We recommend that you purchase your accessories from the same store that sold you the
tool. Use good quality accessories marked with a well-known brand name. Choose the type
according to the work you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
9
Lithium-Ion Cordless Drill/Driver EN
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury.
2. Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden
wiring. Cutting accessory contacting a
“live” wire may make exposed metal
parts of the power tool “live” and could
give the operator an electric shock.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells or
battery pack.
b) Do not short-circuit a battery pack. Do
not store battery packs haphazardly in
a box or drawer where they may short-
circuit each other or be short-circuited by
conductive materials. When battery pack
is not in use, keep it away from other
metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects,
that can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a
fire.
c) Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has
been made, wash the affected area with
copious amounts of water and seek
medical advice.
f) Seek medical advice immediately if a cell
or battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a
clean dry cloth if they become dirty.
i) Battery pack needs to be charged before
use. Always refer to this instruction and
use the correct charging procedure.
j) Do not maintain battery pack on charge
when not in use.
k) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
l) Battery pack gives its best performance
when it is operated at normal room
temperature (20°C ± 5°C).
m) When disposing of battery packs, keep
battery packs of different electrochemical
systems separate from each other.
n) Recharge only with the charger specified
by WORX. Do not use any charger other
than that specifically provided for use
with the equipment. A charger that is
suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
o) Do not use any battery pack which is not
designed for use with the equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
10
Lithium-Ion Cordless Drill/Driver EN
SYMBOLS
Wood
Metal
Brick
Wear protective gloves
High speed
Low speed
WARNING–To reduce the risk of
injury, user must read instruction
manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water.
Do not burn
Li-I on
Li-Ion
Do not dispose of batteries, Re-
turn exhausted batteries to your
local collection or recycling point.
Drilling
Screwdriving
Hammer drilling
11
Lithium-Ion Cordless Drill/Driver EN
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for driving in and
loosening screws as well as for drilling in
wood, metal and plastic.
ASSEMBLY AND OPERATION
Action Figure
BEFORE OPERATION
Removing the battery pack See Fig. A1
Charging the battery See Fig. A2
Installing the battery pack See Fig. A3
ASSEMBLY
CHUCK ADJUSTMENT
WARNING: Always lock off trigger
switch and disconnect tool from power
source when changing accessories. Always
ensure the bit is secure before starting the tool.
Damage to the Chuck or a loose bit may cause
possible personal injury.
--Removing the bits See Fig. B2
--Inserting the bits See Fig. B1
OPERATION
Forward/reverse rotation
control
WARNING: Never
change the direction
of rotation when the
chuck is rotating, wait
until it has stopped!
See Fig. C1,
C2, C3
TWO-SPEED GEAR
CONTROL See Fig. D
TORQUE ADJUSTMENT
DRILLING,SCREWDRIVING,
HAMMER DRILLING
See Fig. E
Operating the on/off switch
WARNING: Do not
operate for long
periods at low speed
because excess heat will
be produced internally.
See Fig. F
LED Light Indicator
Before operation, the LED light will be
activated when the On/Off switch is slightly
depressed, and will automatically turn off 20
seconds after the On/Off switch is released.
The tool and battery are equipped with a
protection system. When the LED Light is
quickly flashing 3 seconds and turn off, the
system will automatically cut off power to
the tool to extend battery life.The tool will
automatically stop during operation if the tool
and/or battery are placed under one of the
following conditions:
• Overloaded:The tool is operated in a
manner that causes it to draw an abnormally
high current. In this situation, release the
Trigger Switch on the tool and stop the
application that caused the tool to become
overloaded.Then pull theTrigger Switch again
to restart.
• Overheated: Under the condition above, if
the tool does not start, theTool and Battery are
overheated. In this situation, let theTool and
Battery cool before pulling theTrigger Switch
again.
• Low battery voltage:The remaining
Battery capacity is too low and the tool will not
operate. In this situation, remove and recharge
the Battery.
WARNING: To turn on the light, press
the On/Off switch and make sure the
Forward/Reverse Rotation Control is on
right/left position.
Other manuals for WX152
2
This manual suits for next models
4
Table of contents
Other Worx Power Tools manuals
Worx
Worx MAKERX WX743 User manual
Worx
Worx D-LITE WX128 User manual
Worx
Worx WU460 User manual
Worx
Worx MARKERX WX739 User manual
Worx
Worx WX682L User manual
Worx
Worx WX548 User manual
Worx
Worx MARKERX WX739.X User manual
Worx
Worx WX255 User manual
Worx
Worx WX177 Series Operation instructions
Worx
Worx WX473 User manual
Worx
Worx WX15RT.2 User manual
Worx
Worx WX696L X Series User manual
Worx
Worx WX255 User manual
Worx
Worx WX543L User manual
Worx
Worx WX477 User manual
Worx
Worx WU527 User manual
Worx
Worx WX477 User manual
Worx
Worx WG500E Installation manual
Worx
Worx WT542 User manual
Worx
Worx Sonicrafter WX676 Installation manual
