Wize WR-17GT User manual
WR-17GT
Motorized
retractable monitor
User manual
Screen size: 17.3 inch
Signal input: HDMI, VGA
Tilt angle: 0-30 degree, adjustable
Touch function: optional
1. Listing.Shape and Panel Key Description
1.1 Packing list
No.
Name
QTY
1
LIFT SYSTEM
1PCS
2
POWER CABLE
1PCS
3
RS485 CABLE
1PCS
4
USER MANUAL
1PCS
1.2 Panel key Functions
No.
English
Button show
1
STOP
2
UP
3
DOWN
4
FORCF(adjust angle)
5
BACK(adjust angle)
1.3 Interface board features(from left to right)
FIG1 surface
1.3.1HDMI Video signal input.
1.3.2VGA Video signal input.
1.3.3USB input, up for USB put, down for the touch screen control card
interface
1.3.4RS485 control input(1,2,5)
1.3.5RS485 control input(When cluster control)
1.3.6ANT, Remote control receiver antenna（315MHz）。
1.3.7Standby button interface: PC SW computer open button. SASW signal
switching key.
1.3.8 AC220-240V Power input socket
1.4 Control Introduction：
1.4.1RS485 Software Control:9 holes interface with the computer serial port.
232/485 intermediate bridge converter.
FIG2 connector(female）
1.4.2Control Button：（Please see Panel Key function, Red means light
power indicator)
FIG 4 Panel control button
1.4.3Screen button function：（Pls see the 7 point, screen menu to adjust
the guide）
Auto ▲
▲
Menu Led
FIG5 Screen Button
“Menu” menu button，
“Auto”Automatic adjustment key，
“
▲
”Variable increment key，
“
▲
”Variable reduced key，
“ ”Screen Power Switch button。
“LED”Power indicator（Red means no have signal, Green means have signal)
1.4.4 Sub Button function:
FIG6 Sub panel button and USB
PC SW，SA SW Spare custom button for customer, and spare USB
port for customer to use, it match as the connector board USB.
2. Features and Major Technical Indicator
2.1 Structure Features
The part of screen Lift is adopt bilateral synchronous belt wheel with linear
optical axis transmission and low noise and stable structure. Angle tilt of part
is drive independently, can adjust from 0 to 30 degrees. Screen
frame is adopt pure aluminum with tempered glass front and rear, high-
end atmosphere. And product is adopt desktop embedded design, can
achieve seamless hidden with desktop.
2.2 ：Major Technical Indicator
2.2.1. LIFT Technical Data（Sheet 1）
No.
Name
Date
1
Working Voltage frequency
AC220-240V 50/60Hz
2
Consumed power
＜60W
3
single-working time
18S
4
Elevation angle
≤30°
5
Product weight
22Kg
2.2.2 Screen Technical Data（Sheet 2）
No.
Name
Date
1
Signal Type
eDp
2
Display Size
17.3
3
Resolution
1920*1080
4
Aspect Ratio
16:9
5
Contrast
1000:1
6
Brightness
250
7
Viewing angle
80/80/80/80
8
Video signal mode
VGA/HDMI
（Automatic Identification）
3. Structural dimensions and installation instructions：
3.1 Size of structure figure.
FIG 7 Size of structure figure.
3.2 User installed out-cut size figure.
FIG8 OUT-CUT SIZE
3.3 Installation Notes：
3.3.1Before operation, please remove two "transport fixing screws" on the
cover and clean the inside of the clamshell door foam filler.
3.3.2The lifter embedded inside the opening, panel flush with the desktop.
3.3.3Video Signal connector Cable（VGA or HDMI or DVI）
3.3.4Connect the touch USB Cable(not need to connect the touch USB
cable if without touch function)
3.3.5If need Central-controlled system, please connect the control line
RS485.
3.3.6Connected the antenna with antenna base together
3.3.7Turn on AC220V power supply, panel indicator is light, press UP key to
complete the automatic elevation, the screen lights up, and then you
can adjust he angle within 30 degrees.
4. Technical date:
4.1 HEX system controlling code（Sheet 4）
All up
FF AC E1 FF 00 00 DD 01 DC
All stop
FF AC E1 FF 00 00 CD 01 CC
All down
FF AC E1 FF 00 00 ED 01 EC
All forward tilt
FF AC E1 FF 00 00 1D 01 1C
All back tilt
FF AC E1 FF 00 00 2D 01 2C
4.1.1Computer software control
4.1.2Download "Multifunctional lifting equipment Control Center" control
software from the company's official website.
4.1.3Prepare a RS232-485 or USB-RS485 protocol converter.
4.1.4 Uses Windows XP systems to install the software.
4.1.5Connect the LIFT equipment.
4.1.6According to the software that comes with help files, you can use to
operate.
5. Solutions of screen common problems：
Common failure analysis（Sheet 5）
No.
Fault phenomenon
Analysis reason
5.1
Display is blank
·Power switch is turned off?
·Signal source is interrupted?
5.2
Blurred characters
·Is match with the resolution of the
computer?
Contrast and brightness adjustments
are correct？
5.3
Black Screen
·No signal may be turned off
automatically Brightness？
Brightness adjustment if adjust to the
minimum？
·Long press "Auto" key may cause
shutdown, the LED turns red.
6. Solutions of Lift common problems：
6.1 All machine no power, light does not shine:
Pry the Insurance cover of power to check the fuse if damage? If so,
please change specifications 3.15A fuse.
FIG 10 Location of fuse socket GB
6.2 The control circuit board Common trouble diagnosis method：
6.2.1 Pls check the power supply socket "L" and "N" (between the circuit
board of the LT3 terminal) resistance is about 1.1K or so, which is
normal, if deviate from this range ,it has the problem.
6.2.2 Indicator light does not shine, the key is invalid, but computer control
normal: may be key board cable transport from strong vibration caused
by poor contact.
6.2.3 Circuit boards 12V abnormal, check L7812 if it's damage.
6.2.4 Circuit boards 5V abnormal, check L7805 if it's damage.
6.2.5 Up limit switch belong pulse level control, after the pulse remains
stopped. But the display power required to maintain the state of shading
for photoelectric control.
6.2.6 Down limit switch belong to low pause control, continued to decline at a
high level. Therefore, photoelectric control gobo stop during descent
should remain light shielding state.
Table of contents
Other Wize Monitor manuals
