Winmate W07IB3S-EHT1 User manual

Please read these instructions carefully before using this product, and save this manual for future use.

E-Series HMI

Intel® Celeron® Bay Trail-M N2930 1.83 GHz

W07IB3S-EHT1

W10IB3S-EHH2

W15IB3S-EHA2

Quick Start Guide

V1.1

For more information on this and

other Winmate products, please

visit our website at:

www.winmate.com

Document Part Number: 9152101I1003

- 2 -

Contents

1 INTRODUCTION - 8 -

1.1 Features - 8 -

1.2 Package Contents - 9 -

1.3 Product Overview - 10 -

1.3.1 E-Series HMI 7” - 10 -

1.3.2 E-Series HMI 10.1” - 11 -

1.3.3 E-Series HMI 15.6” - 12 -

2 GETTING STARTED - 13 -

2.1 Turning on Your Device - 13 -

2.2 Connecting to Other Devices - 14 -

2.2.1 Power Connector - 14 -

2.2.2 Serial Port Connector - 14 -

2.2.3 Ethernet Connector - 15 -

2.2.4 USB Connector - 15 -

2.2.5 HDMI Connector - 16 -

2.3 Changing Serial Port Settings - 17 -

2.4 How to Enable Watchdog - 18 -

2.5 Turning off Your Device - 19 -

3 INSTALLATION - 20 -

3.1 Wiring Requirements - 20 -

3.2 Mounting Solution - 21 -

3.2.1 Panel Mounting - 21 -

3.2.2 VESA Mounting - 22 -

5 SPECIFICATIONS - 23 -

5.1 Hardware Specifications - 23 -

APPENDIX - 25 -

Appendix A: Cleaning the Monitor - 25 -

Appendix B: Winmate Software Development Kit - 26 -

- 3 -

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two

conditions:

This device may not cause harmful

interference.

This device must accept any interference

received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the

limits for a class "B" digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at him

own expense.

- 4 -

European Union

Electromagnetic Compatibility Directive

(2014/30/EU)

EN55024: 2010/ A1: 2015

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2014

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55032: 2012/AC:2013

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/

A2:2013

This equipment is in conformity with the requirement of the

following EU legislations and harmonized standards. Product also

complies with the Council directions.

- 5 -

No part of this document may be reproduced, copied, translated, or

transmitted in any form or by any means, electronic or mechanical, for

any purpose, without the prior written permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of

their respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to

any product, including circuits and/or software described or contained

in this manual in order to improve design and/or performance. We

assume no responsibility or liability for the use of the described

product(s) conveys no license or title under any patent, copyright, or

masks work rights to these products, and make no representations or

warranties that these products are free from patent, copyright, or

mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We

make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be

free from material and workmanship defects for a period of one year

from the invoice date. If the customer discovers a defect, we will, at

his/her option, repair or replace the defective product at no charge to

the customer, provide it is returned during the warranty period of one

year, with transportation charges prepaid. The returned product must

be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by

over 30 days, the in-warranty service will be made according to the

shipping date. In the serial numbers the third and fourth two digits

give the year of manufacture, and the fifth digit means the month (e.

g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of

year 2014.

- 6 -

Customer Service

We provide a service guide for any problem by the following steps:

First, visit the website of our distributor to find the update information

about the product. Second, contact with your distributor, sales

representative, or our customer service center for technical support if

you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers

every business day. We are always ready to give advice on

application requirements or specific information on the installation and

operation of any of our products.

- 7 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden

power surges. Only experienced electronics personnel

should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis

lorsque vous travaillez sur celui-ci. Ne pas brancher de

connections lorsque l’alimentation est présente. Des

composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement

du personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge

before touching the CPU card. Modern electronic devices

are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place

all electronic components in a static-dissipative surface

or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute

charge statique avant de toucher la carte CPU. Les

équipements électroniques moderns sont très sensibles

aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer

toutes les composantes électroniques sur une surface

conçue pour dissiper les charge, ou dans un sac anti-

statique lorsqu’elles ne sont pas dans le chassis.

- 8 -

1 INTRODUCTION

Congratulations on purchasing Winmate® E-Series HMI. Winmate®

continues developing new generation of Human Machine Interfaces

for Industry 4.0 and Internet of Things (IoT). You can choose the

most suitable operating system for you application. Thereby wide

customization possibilities are available to satisfy the needs of

industrial automation.

With mounting clips for panel mounting there is no need to drill

holes in a fixture. This saves you the time for mounting and

guarantee aesthetic look of the wall after the unit gets removed.

1.1 Features

Winmate® E-Series HMI features:

Intel® Celeron® Bay Trail-M N2930 1.83 GHz

Resistant to scratches Projected Capacitive Multi-Touch (P-

CAP)

Fanless cooling system and Ultra-low power consumption

Front IP65 water and dust proof, rear IP22

Power over Ethernet (Data and Power connections in a single

cable)

Mounting clips for Quick installation

Elegant design for room booking, access control and room

information applications

- 9 -

1.2 Package Contents

Carefully remove the box and unpack your device. Please check if

all the items listed below are inside your package. If any of these

items are missing or damaged contact us immediately.

Standard factory shipment list:

HMI Device

Quick Start Guide

(Hardcopy)

Driver CD & SBC

User Manual

Varies by product

specifications

9152101I1003

IB32: 9171111I101Y

Power Cord

AC Adapter

(12V/ 50W)

Mounting Clips and

Screws

Varies by country

922D050W12VA

82111E240400

- 10 -

1.3 Product Overview

1.3.1 E-Series HMI 7” Unit: mm

№

Description

№

Description

󰪦

12V DC Power Jack

󰪩

HDMI 1.4a

󰪧

RS-232/422/485

󰪪

RJ-45 Gbe LAN x 2

󰪨

USB 3.0 x 1, USB 2.0 x 1

This manual suits for next models

Table of contents

Other Winmate Touch Panel manuals

Winmate

Winmate W22IK3S-SPA369 User manual

Winmate

Winmate W10IB3S-MRH2 User manual

Winmate

Winmate W07IB3S-PCO1AC-POE User manual

Winmate

Winmate IP69K Stainless P-Cap User manual

Winmate

Winmate W15IB3S-PTA3 User manual

Winmate

Winmate G-WIN W07RK3S-GCT1 User manual

Winmate

Winmate W05TA3S-PCT3AC User manual

Winmate

Winmate R17IB3S-RKA1ML User manual

Winmate

Winmate R15IB3S-SPC369 User manual

Winmate

Winmate W24IB3S-SPA269 User manual

Winmate

Winmate GC Series User manual

Winmate

Winmate ATEX R19IHAT-66EX-T User manual

Winmate

Winmate W10IH3S-GCH1(HB) User manual

Winmate

Winmate R15ID3S-65A1FTE User manual

Winmate

Winmate R10IB3S-SPT2 User manual

Winmate

Winmate 7'' S-Series User manual

Winmate

Winmate W07IB3S-GCM1(HB) User manual

Winmate

Winmate W07RK3S-PCO1-POE User manual

Winmate

Winmate R15IB3S-65EX User manual

Winmate

Winmate 7'' S-Series User manual

Winmate

Winmate W07FA3S-GSO1 User manual

Winmate

Winmate R15IK3S-65C3 User manual

Winmate

Winmate GC Series User manual

Winmate

Winmate G-WIN User manual

Popular Touch Panel manuals by other brands

FlowLine

FlowLine Data loop quick start

ALPEX

ALPEX AEx-8 P Series user manual

Ltech

Ltech E5S manual

Harman

Harman AMX MODERO S MSD-701-L2 quick start guide

Acnodes

Acnodes PC 1150 installation guide

AIS

AIS IP10IA99 series user guide

IBASE Technology

IBASE Technology ASTUT-152-RE1S user manual

YASKAWA

YASKAWA TP 610C manual

B&R

B&R Power Panel C Series user manual

Beijer Electronics

Beijer Electronics X2 control Hardware and installation manual

AXIOMTEK

AXIOMTEK GOT321W-521 user manual

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Operation manual

Qomo

Qomo QIT1386 user manual

DFI

DFI KS104-CD user manual

AMX

AMX AXP-PPC Dimensional drawing

Sartorius

Sartorius X3 PR 5410 operating manual

AMX

AMX Modero X Series quick start guide

Advantech

Advantech TPC-30 Series user manual