Winmate M101B Series Instruction Manual

Please read these instructions carefully before using this product, and save this manual for future use.

M101B Series Rugged Tablet PC

Frequency Asked Questions (FAQ)

M101B Series Tablet FAQ 1

About This Guide

This guide lists some of the frequently asked question (FAQ) about M101B tablet. For the latest

documentation, please visit Winmate official site to download the latest documentation:

http://www.winmate.com.tw/

Vehicle and Desk Dock

1. How come the external display has no signal input from the docking station VGA

port when I insert the M101B into the dock with VGA equipped?

The M101B is shipped without VGA driver pre-installed, and therefore the VGA driver has

to be installed first before using the dock’s VGA output. For driver installation, please refer

to the docking driver installation guide for detailed installation and setup information.

2. What is the default external display mode of the VGA output after the VGA driver is

installed?

The M101B’s default external display setting for the VGA output is mirror mode, and only

under mirror mode would the touchscreen on the M101B operate normally.

3. Can I change the M101B’s external display setting to extend mode?

Yes, the M101B’s external display setting can be changed and saved to use extend mode.

However, under this mode, it is recommended that the user operate M101B with keyboard

and mouse as any touch operation on the touchscreen would correspond to the external

display.

4. Why the Tablet's screen turns black for a second when I insert the tablet into the

docking station?

This is normal when the docking supports VGA output and the VGA driver (USB to VGA)

is installed. When the tablet detects the VGA function on docking, tablet built-in graphic

driver will adjust the graphic settings to display image over the VGA output, and cause the

screen turning black for a second.

This symptom also happens when the VGA output is well installed with docking but no

physical external display connected.

5. The tablet's resolution is changed and the display is not filling the whole screen

when working with the dock. The touch screen does not seem to be accurate. Is it

normal? Why this happens?

This is normal when docking VGA driver is installed on M101B without proper setup.

Under the default mirror mode setting, display resolutions for both tablet built-in screen

and external monitor will be the same. If the external monitor's resolution is lower than the

M101B Series Tablet FAQ 2

built-in native one, the tablet built-in display will sync with the lower resolution and thus not

filling whole screen. The side effect for this issue is that, when the built-in display is not

fitting the touch active area, the touch controller will not be able to calculate correctly and

leads to incorrect positioning.

This symptom also happens on M101B when VGA output is well installed with docking but

no physical external display connected. Under this situation, the tablet built-in display

resolution will sync to docking VGA default setting, 1920x1080, which is with different ratio

from M101B's built-in display.

To resolve this problem, user should change M101B’s built-in display setting to fill screen

instead of keeping aspect ratio. For detail information, please refer to the docking driver

installation guide for installation and setup scenarios. The settings will be saved

automatically for next use.

Operating System Installation

1. When installing Windows 7 onto a Windows 8 pre-installed M101B tablet, upon

installation completion and rebooting, the tablet cannot get past the Windows boot-

up logo. What is the cause of the issue, and how can I fix it?

For tablet computer that is shipped with Windows 8 Embedded pre-installed, if the user

wishes to install Windows 7, it is necessary to change BIOS setting from the default UEFI

mode for Windows 8 support to Legacy mode for Windows 7 support.

Please follow the procedure below to perform the BIOS setting change.

I. Plug-in the AC adapter to the tablet computer. Make sure the tablet computer stays

plugged in to power source during the BIOS setting change process.

II. Plug-in the USB hub to the tablet computer. Then connect the recovery USB drive,

the USB keyboard, and the USB mouse to the USB Hub.

III. Turn on the tablet computer, and when the boot screen shows up do the either of

the following option to go into BIOS menu:

a. Press “DEL” key

b. Press “F7” key to bring up boot device select menu, and choose “Enter

Setup”

M101B Series Tablet FAQ 3

IV. From BIOS setup menu, go the “Advanced” tab and then choose “Miscellaneous

Configuration” from the menu as shown below.

V. Go to the “OS Selection” item, and change the setting to Windows 7

M101B Series Tablet FAQ 4

VI. Go back out to the “Advanced” tab, and choose “CSM Configuration” from the

menu.

VII. Within the “CSM Configuration” menu, go to the items “Storage” and “Video” and

change the settings to “Legacy only”.

M101B Series Tablet FAQ 5

VIII. Next go to the “Boot” tab, and go to the item “Boot mode select” and change the

setting to “LEGACY”.

IX. Save and Exit the BIOS menu.

2. After successful Operating System Installation (either Windows 7 or 8), the tablet

boots into Recovery Mode, and cannot boot into Windows. What is the cause of the

issue, and how can I fix it?

The M101B is shipped with the hard drive containing two partitions: the main system

installation, and the recovery partition. The described issue is most likely to be caused by

installing the new operating system directly over the original system installation without

removing the recovery partition. Please reformat/repartition the system drive before

proceeding with operating system installation.

3. When installing Windows 7 SP1 onto a Windows 7 pre-installed M101B tablet, the

installation process cannot be completed. What is the cause of the issue, and how

can I fix it?

If the described issue occurs, please reformat/repartition the system drive before

proceeding with operating system installation.

Other manuals for M101B Series

Table of contents

Other Winmate Tablet manuals

Winmate

Winmate M101P-ME User manual

Winmate

Winmate M101RK Series User manual

Winmate

Winmate M101H User manual

Winmate

Winmate R10IH8M-RTT2GP User manual

Winmate

Winmate I881 User manual

Winmate

Winmate M133K User manual

Winmate

Winmate M900EK Series User manual

Winmate

Winmate M116K User manual

Winmate

Winmate 10.1'' S-SERIES HMI User manual

Winmate

Winmate M101M8-4E User manual

Winmate

Winmate M700DM4 User manual

Winmate

Winmate M101BK User manual

Winmate

Winmate IA83 User manual

Winmate

Winmate M101B Series User manual

Winmate

Winmate M700DM4 User manual

Winmate

Winmate M101P-L User manual

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series User manual

Winmate

Winmate M133KML(HB) Series User manual

Winmate

Winmate M900P User manual

Winmate

Winmate NXBoard User manual

Winmate

Winmate M101S User manual

Winmate

Winmate M101EKB User manual

Winmate

Winmate IA80 Series User manual

Winmate

Winmate M133 Series User manual

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

DT Research

DT Research DT365CT Basic operation guide