Winix HR900 User manual

User Manual

Model

Use & Care

Guide

• Please read and follow all safety rules and

instructions in this manual before operating.

• The product warranty is printed on the back of this

guide, so please keep it in a safe place for future use.

• This product is manufactured for use only in USA/CA.

WINIX AIR CLEANER

HR900

English HR900

CONTENTS

5-STAGE AIR PURIFICATION············································································ 3

CONTROLS······································································································ 4

WHERE TO USE ······························································································· 5

INSTALLING THE FILTERS················································································ 6

SAFETY AND CAUTIONS················································································· 8

INITIAL OPERATION························································································ 9

AUTO AND SLEEP ························································································· 10

MANUAL MODE, TIMER AND PLASMAWAVE

·············································· 11

CHILD LOCK, AIR QUALITY LED ···································································· 12

FILTER CARE·································································································· 13

CLEANING THE DUST SENSOR······································································ 17

CLEANING CARE ··························································································· 18

FREQUENTLY ASKED QUESTIONS································································· 19

UNIT SPECIFICATIONS ·················································································· 21

SAFETY INSTRUCTIONS················································································ 22

PRODUCT WARRANTY·················································································· 23

•This product is suitable for 120 V only.

French ·········································································································· 24

Spanish········································································································· 49

English HR900

5-STAGE AIR PURIFICATION

PlasmaWave



Advanced OdorControl

(AOCTM) Carbon Filter

replaceable

washable

replaceable

Product User ManualPre-filter / AOCTM Carbon filter

/ True HEPA filter

12 Pet Filter

UserManual

Model

Use&Care

Guide

•

Pleaseread and follow all safety rules and instructions

inthis manual before operating.

The product warranty is printed on the back of this

guide,so please keep it in a safe place for future use.

This product is manufactured for use only in USA/CA.

WINIXAIR CLEANER

HR900

English HR900

CONTROLS

Air Outlet Vent

Light Sensor

Detects the amount

of ambient light within

the environment,

to adjust the brightness

of the LED indicators.

Mode / Fan Speed Button

Every time the Mode button

is pressed, the Mode LED light

will cycle through the settings.

(Auto, Sleep, Low, Medium,

High, Turbo)

Child Lock Button

Press and hold for 3 seconds

to enable or disable

the Child Lock mode.

Timer Indicator

If timer has been set,

the LED light indicates

the set time of operation.

Timer / Air Quality Light Button

Press to cycle through and set

desired length of operation

(1hr, 4hr, 8hr, [NO TIMER]).

Press and hold for 3 seconds

to enable or disable the

Air Quality light.

Smart Sensor

Automatically

detects indoor

air quality.

Reset Button

After replacing a lter,

press the RESET button

for at least 5 seconds.

Power Button

Turns the unit on

or o.

Child Lock Indicator

LED light indicates whether

Child Lock mode is

enabled or disabled.

Check Filter Indicator

LED light indicates when it is

time to change the lter.

PlasmaWave

Indicator

Indicates whether

PlasmaWave

enabled or disabled.

PlasmaWave Button

Enables or disables

PlasmaWave

English HR900

WHERE TO USE

Allow 12 ~ 18 in. of space between TVs, radios, and other electronic products

electromagnetic interference from certain electronics may cause product malfunction.

Place indoors away from direct sun light

direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

flimsy or slanted surfaces may result in abnormal noise and vibrations.

12~18 in

4 in

WARNING Follow these instructions to reduce the risk of serious injury

or death and to reduce risk of damaging the unit.

Do not use around mist or fumes from

industrial oil or around large quantities of

metallic dust

Do not place around heating elements

Do not install in any sort of motor or

transport vehicle (trucks, boats, ships, etc.)

Do not place in an area with excessive

amounts of noxious gases

Do not place near any flammable

materials (aerosols, fuel, gases etc.) Do not have unit facing into wind or draft

Do not place below any electrical outlet Do not place in excessively humid areas

where unit may become wet

•This unit is not intended to be used to preserve documents or in art conservation.

English HR900

This product comes with all of the required filters. The protective plastic wrap must be

removed from the filters before use.

•Operating the unit without removing the plastic wrap may result in product failure.

•Unplug and make sure the unit is turned off before installing filters.

•The unit will automatically power off when front panel is opened.

1Remove the front panel by grasping its

upper edge and gently pulling towards

yourself.

•To remove the front panel, the latch at

the lower edge of the panel must be

released from its position.

Latch

2 Remove the filters from the unit, they are

protected inside a plastic wrap.

3 Remove filters from protective plastic wrap.

•Operating the unit without removing

filters from plastic may cause abnormal

noise, deformation, or fire as a result of

overheating.

NOTE •Refer to pages 13 - 16 for detailed information on filter care

and how to replace them.

INSTALLING THE FILTERS

English HR900

INSTALLING THE FILTERS

1 Install the filters until they fit securely in

place.

Filters must be installed in this order:

 True HEPA filter (rear)

 AOC

Carbon Filter (middle)

 Pre-filter (front)

•To install the pre-filter, insert bottom tabs

into the slots on either side of the lower part

of the unit, then rotate upward to insert the

upper tabs into the slots at the top part of

the unit until both sides audibly click into

place.

Pre-filter

AOC

Carbon

Filter

True HEPA

filter

2 Replace the front panel by first inserting

the latch at the bottom edge into the

base of the unit, then rotate the panel

upward toward the top of the unit until it

magnetically snaps closed.

•When to service and replace filters :

Filter Indicator Light When to service When to replace

2 Pre-filter none Clean once every

14days Permanent

3 AOC™ Carbon Filter Clean once every

3 months Lasts up to

12months

4 True HEPA filter Can NOT be

WASHED

•Intervals between filter replacement may vary depending on environment.

•For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of

other filters.

To purchase replacement

Winix filters:

(877)-699-4649

www.winixamerica.com

FILTER

Item: 1712-0094-00

This unit

is compatible

with

ﬁlter

FILTER

Item: 1712-0093-00

This unit

is compatible

with

ﬁlter &

English HR900

SAFETY AND CAUTIONS

Before operating this equipment, carefully read and follow these safety cautions and

instructions to avoid damage and ensure safe use.

Ensure filters are inserted before running unit

running unit without filters can shorten the units life and cause electric shock or injury.

Be sure foreign objects are NOT inserted into the vents on the unit

objects can include pins, rods, and coins.

Do not touch any part of the interior of the unit with wet hands

the high voltage may cause electric shock.

Ensure unit intake and outlet vents do not become blocked

blockage may lead to increased internal temperatures causing product failure and

deformation.

Do not use the unit as a step stool or place heavy objects on it

personal injury may occur or product failure and deformation.

WARNING Follow these instructions to reduce the risk of serious

injury or death and to reduce risk of damaging the unit.

Do not pull on the power cord when

unplugging the unit

Do not tie or knot power cord when unit

is in operation

If the unit becomes submerged in water,

unplug it and contact customer service

Do not unplug or move the unit while in

operation

Do not plug additional appliances into

the same outlet or power supply Do not touch the plug with wet hands

Unplug unit when not in operation for

extended periods of time

Cord can become damaged by forcefully

bending, pulling, twisting, bundling,

pinching or placing heavy objects on it

English HR900

INITIAL OPERATION

1 Insert the unit plug into an electrical outlet.

•The Control Panel lights will turn on and

off.

2 Press the 'Power' button.

NOTE •During the first 4 minutes of power up, the Air Quality light

will flash as the Smart Sensors measure the air quality in the

environment, after which normal operation will begin.

•By default, when the unit first powers on, the

mode will be set to Auto with PlasmaWave

enabled.

•When in Auto Mode the fan speed will

be automatically adjusted according to

the environments air quality.

•PlasmaWave

works to remove harmful

airborne contaminants.

NOTE •In Auto mode, as the indoor air quality improves, the fan

speed will automatically be reduced to Low.

•When the unit is running, you may hear a chirping or buzzing

sound. The sound is from large particles passing through

PlasmaWave

, it is normal and does not signify product

failure. To disable PlasmaWave

, see page 11.

English HR900

AUTO AND SLEEP

Every time the Mode button is pressed, the Mode LED light will cycle through the

settings. (Auto, Sleep, Low, Medium, High, Turbo)

1. Auto Mode

Enables Auto operation based on the unit's air quality Smart Sensors.

Press the Mode button to select Auto mode.

•The mode LED light will indicate when

‘Auto’mode has been selected, and

operation will begin.

•Each time the Mode button is pressed,

the modes will be cycled. (Auto, Sleep,

Low, Medium, High, Turbo).

NOTE •When in Auto Mode the fan speed is automatically adjusted

according to the indoor air quality. As the indoor air quality

improves, the fan speed will automatically be reduced. If the

indoor air quality decreases the fan speed will automatically

be increased.

•When the unit is first started, Auto Mode is enabled and set

to Low fan speed.

2. Sleep Mode

Press the Mode button to select Sleep mode.

•The mode LED light will indicate when

‘Sleep’mode has been selected, and

operation in that mode will begin.

NOTE •When Sleep mode is selected, the fan speed is automatically

set to Low. Fan speed can be changed by pressing the Fan

Speed (Mode) Button.

•When Sleep Mode is enabled, the Air Quality light is disabled.

Other manuals for HR900

Table of contents

Languages:

Popular Air Cleaner manuals by other brands

IKEA

IKEA UPPÅTVIND quick start guide

Nash

Nash AP-1 PureSmart instruction manual

LG PH-U450 Series owner's manual

DeLonghi

DeLonghi DDSX 220WFA manual

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E instruction manual

Sharp

Sharp FU-40SE Operation manual

Philips

Philips AC2721 user manual

Hitachi

Hitachi EP-A3000 instruction manual

TruSens

TruSens Z-2000 manual

Motorola

Motorola MBP87SN quick start guide

Beko

Beko ATP 7100I instruction manual

Carrier

Carrier INFINITY 1620 installation instructions

AtmosAir

AtmosAir P2002 user guide

Friedrich

Friedrich C-90A Service information

Surgically Clean Air

Surgically Clean Air JADE2.0 Operation manual

Base aire

Base aire 555 Pro Installation & operation manual

Champion

Champion CP25 instructions

vollara

vollara Air & Surface Pro+ manual