Widex Pro Link User manual

WIDEX A/S Nymoellevej 6, DK-3540 Lynge, Denmark

global.widex.com

Manual no.:

9 514 0414 099 #03

Issue:

2018-01 9 514 0414 099 #03

USER INSTRUCTIONS

PRO LINK

321

5.1.

6.2.

7.3.

PACKAGE CONTENTS AND DESCRIPTION OF DEVICE

Package contents - see illustration 1:

1.1 Fitting device

1.2 Regular neckloop (75 cm)

1.3 Long neckloop (85 cm)

1.4 Docking station

1.5 Micro USB cable

1.6 Bluetooth® adaptor (model: BT adaptor)

1.7 Plugs for the charger

The device - see illustration 6:

6.1 Center LED

6.2 Neckloop connectors

6.3 LED for the left hearing aid

6.4 LED for the right hearing aid

6.5 Push button (on/off switch/pairing)

6.6 Micro USB port for charging

6.7 Reset pinhole button

6.8 Bluetooth adaptor - LED

6.9 Pairing button

IMPORTANT SAFETY INFORMATION

Warnings

Read this page carefully before you start using this device.

Do not use the device in mines or other areas with explosive gases.

Do not expose to extreme temperatures or high humidity.

When the device is connected via micro USB cable to external mains-operated

equipment such as a charger, PC, audio source or similar, this equipment must com-

ply with IEC 60065, IEC 60950-1, IEC 60601-1 or equivalent safety standards.

Any change or modification to the device that has not been expressly approved by

the manufacturer could void the user's authority to operate the device.

Do not use the product at altitudes above 2000 meters, as extremely low air pres-

sure may result in an explosion or the leakage of flammable liquid or gas.

Do not dispose of the product with battery into fire or a hot oven.

Your device should be stored and transported within the temperature and humidity

ranges of -10°C to +50°C (14°F to 122°F) and < 90% rH.

Your device is designed to operate from 5°C (41°F) to 40°C (122°F).

For more information about your device, visit: widex.pro.

Intended use

The device is intended to connect the COMPASS GPS fitting software with a wireless

WidexLink hearing aid for fitting purposes.

SETTING UP THE DEVICE

Charging the device - see illustration 2

Connect the docking station to a power outlet and place the fitting device on the

docking station. Alternatively, you can connect the docking station to your computer

using the micro USB cable.

NOTE

Let the battery charge up to 100% before using the device for the first time.

Connecting the device to a computer - see illustrations 3,4 and 5

To connect your fitting device to your computer using the Bluetooth adaptor, do as

follows:

3. Plug the Bluetooth adaptor into an USB port on your computer.

4. Turn on the computer.

5. Turn on the device. The system is now ready for use.

NOTE

Note that the device only connects to the Bluetooth adaptor provided.

You can also use the micro USB cable provided with your fitting device to connect it to

your computer.

USING THE DEVICE

Place the hearing aids and the neckloop on your client.

Press the push button on the device to turn it on and establish connection to the fit-

ting software via Bluetooth.

Follow the fitting flow as indicated on your computer.

Visual indicators

The following table shows the available LEDs and what they mean:

Power, battery status, charging and Bluetooth pairing (see illustration 7):

LED Meaning

7.1 The device is on and the battery charged

7.2 The device is charging

7.3 The battery is running low

7.4 The battery is very low

7.5 The device is in pairing mode

7.6 The device is connected via Bluetooth (only shown shortly after the de-

vice has been connected)

Communication between hearing aids and the device (see illustration 7):

LED Meaning

7.7 The device is communicating with the hearing aids

MAINTENANCE

It is important that you keep your device clean and disinfected before use.

●Wipe the device and neckloop with a damp cloth. Do not use any chemicals.

●Do not immerse the device or neckloop in water or any other liquid.

●Clean the power supply, docking station, Bluetooth adapter and micro USB cable

using a dry cloth.

●While the device is not in use, keep it in a dry location out of reach of children and

pets.

●Never try to open or repair the device yourself. This may only be done by author-

ised technicians.

TROUBLESHOOTING

Problem Possible cause Solution

The device does not work a: The device is not correct-

ly connected to your com-

puter

b: The battery is low

c: Out of operating range

a: Make sure the device is

correctly connected and

that the Bluetooth adaptor

is plugged into your PC.

b: Recharge the battery

c: Move within operating

range

If you still experience problems with connecting, pairing or using the device, contact

your supplier for help.

REGULATORY INFORMATION

EU Directives

Directive 2014/53/EU

Hereby, Widex A/S declares that these PRO LINK and BT adaptor are in compliance

with the essential requirements and other relevant provisions of Directive

2014/53/EU.

The PRO LINK contains radio transmitters operating at: 10.6 MHz, -54 dBµA/m @10 m

2.4 GHz, 2.2 mW EIRP.

The BT adaptor contains a radio transmitter operating at: 2.4 GHz, 2.1 mW EIRP.

A copy of the Declaration of Conformity according to 2014/53/EU can be found at:

http://global.widex.com/doc

N26346

Information regarding disposal

Do not dispose of hearing aids, hearing aid accessories and batteries with ordinary

household waste.

Hearing aids, batteries and hearing aid accessories should be disposed of at sites in-

tended for waste electrical and electronic equipment, or given to your hearing care

professional for safe disposal.

SYMBOLS

Symbols commonly used by Name in medical device labelling (labels/IFU/etc.)

Symbol Title/Description

Manufacturer

The product is produced by the manufacturer whose name and address are stated

next to the symbol. If appropriate, the date of manufacture may also be stated.

Catalogue number

The product’s catalogue (item) number.

Consult instructions for use

The user instructions contain important cautionary information (warnings/

precautions) and must be read before using the product.

Warning

Text marked with a warning symbol must be read before using the product.

WEEE mark

“Not for general waste”. When a product is to be discarded, it must be sent to a

designated collection point for recycling and recovering to prevent the risk of

harm to the environment or human health as a result of the presence of hazard-

ous substances.

CE mark

The product is in conformity with the requirements set out in European CE

marking directives.

RCM mark

The product complies with electrical safety, EMC and radio spectrum regulatory re-

quirements for products supplied to the Australian or New Zealand market.

Interference

Electromagnetic interference may occur in the vicinity of the product.

Popular Hearing Aid manuals by other brands

Sonic

Sonic Bliss miniBTE user guide

Lexie

Lexie B1 Replacement guide

Siemens

Siemens Triano user guide

Camplicomms

Camplicomms HC-200 user guide

Phonak

Phonak Q90 user guide

Williams Sound

Williams Sound SoundPlus WIR 237 Manual and user guide

Oticon Medical

Oticon Medical Ponto SoundConnector Instructions for use

Siemens

Siemens Life micon user guide

Starkey

Starkey Destiny Operation manual

Audicus

Audicus The Icon instruction manual

Advanced Bionics

Advanced Bionics Slim HP Standard Instructions for use

Phonak

Phonak myPilot user guide

NIKEN

NIKEN NK-401 instruction manual

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Getting started guide

Sonetik

Sonetik GOHEAR user guide

Siemens

Siemens MUSIC Pro Pro IT user guide

Panasonic

Panasonic WH-216KZ Quick tips

Geemarc

Geemarc CL Bluehook user guide