Wicrypt Lynx User manual
Lynx Instruction Manual
Quick Start Guide
For more information visit www wicrypt com
Items Check List
Before st rting, check th t ll the following items h ve been included
with your device. If nything is missing, cont ct your de ler
Hotspot hub Device is being referred to as in this manual for the purpose of simplicity
Device
5V Ch rger nd C ble
SIM C rd Cover
P ge 2
Nomenclature
Page 3
Hotspot hub Device is being referred to as in this manua for the purpos
of simp icity
Power Switch
(ON/OFF)
Network Indicator
Wifi Indicator
Battery Indicator
USB port
Power Source Port
Ethernet Port
Sim Port
Device Reset
Contents
Page 5
Introduction 2
It ms Ch ck List 2
Nom nclatur 4
Cont nts 5
Quick Start Guide 6
S tting up th D vic 6
Conn ction via Wi-Fi 7
Conn ction via Eth rn t Cabl 8
Device Dashboard Setup 9
How to Conn ct to your Wicrypt D vic 9
How to R gist r a D vic 10
How to S tup D vic Password 11
How to Chang D vic SSID Nam 12
How to Switch from P rsonal to Busin ss Mod 13
Setting Up Explorer 14
S t up mobil account 14
How to Stak and Start Mining Wicrypt N twork Tok ns (WNT) 15
S tup E
x
plor r
A
ccount on your Wicrypt Dashboard 18
How to Sync your Physical D vic to your Mint d D vic 19
Quick Startup Guide
Setting up the Device
1
ake sure the internal battery is charged, if not, connect the device to a
power source
2
Insert your sim card or connect to the internet via your ethernet cable.
3
Turn ON the Device.
Page 6
Quick Startup Guide
4
Wait for 6 minutes for the Wicrypt firmware to finish initialization. Confirm that
the following LEDs are On power wifi and internet.
5
Ensure that the Wi-Fi light is on and blinking. It can take up to 6 minutes for
the devices to be ready
6
Connect your phone or PC via WiFi to the device via SSID.
Page 7
Connection via Wi-Fi
Quick Startup Guide
7
Authenti ate your devi e via the Wi rypt aptive portal. (this step is only
required if Wi rypt business is enabled).
Page 8
Note: You an a ess the aptive portal using the URL wi ryptlogin.net or 192.168.4.4 if
the aptive portal is not displayed automati ally.
Connection via Ethernet Cable
8
Before onne ting with an Ethernet able for the first time, you need to swit h
the port mode from default LAN to WAN using a SIM ard with the steps in
page 6’
9
Authenti ate your devi e via the Wi rypt aptive portal. (this step is only
required if Wi rypt business is enabled).
Quick Startup Guide
10
Click the quick setup tap and switch fro LAN to WAN
Page 9
Note: You can access the captive portal using the URL wicryptlogin.net or 192.168.4.4 if
the captive portal is not displayed auto atically.
How to connect to your Wicrypt Device
11
To connect to your device WiFi, follow all steps fro ‘step 1’. Then ake sure
you are connected to the device network (the WiFi na e usually starts with
‘Wicrypt’)
12
Open your browser and type in the IP 192.168.4.4 or the URL wicryptlogin.net
Tab Na e
192.168.4.4 D
Tab Na e
wicryptlogin.net D
Or
Dashboard Device Setup
Page 10
13
Input “admin” as the device password to login to the portal and click ‘ ogin’
How to register a Device
14
Click on ‘Register Device’
15
Enter your email and password associated with your Wicrypt account created
on the mobile or dashboard app and then click ‘Registe
Dashboard Device Setup
Page 11
16
Click on ‘Register Device’
How to Setup Device Password
17
On the device portal, Click ‘Quick Setup’
18
Under ‘Device Password’, input desired password and Click ‘Save Changes’
Other manuals for Lynx
1
Table of contents
Other Wicrypt Modem manuals
