Whispbar K997W User manual

Table of contents

Languages:

Other Whispbar Automobile Accessories manuals

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual

Prorack

Prorack K1163 manual

K997W

Fitting Kit

EN Fitting Instructions for Basic Carrier

PL Instrukcja systemu montażu

x 2 x 1 x 1 x 2

x 2 x 2 x 1 x 1

x 2 x 2 x 2

Revision No: 1A 1

Fitting Kit K997W

MAX kgs (lbs)

W/P WHD

Jeep

Renegade Sport, 5dr SUV 15-+ AU 68 kgs (149 lbs) 68 kgs (149 lbs)

Renegade Sport, 5dr SUV 15-+ EU 68 kgs (149 lbs) 68 kgs (149 lbs)

Renegade Sport, 5dr SUV 16-+ NZ 68 kgs (149 lbs) 68 kgs (149 lbs)

2

Fitting Kit K997W

X

A B C 1 2 3

Renegade Sport, 5dr SUV 15-+ (AU) 275mm 480mm - 915mm 970mm -

10 13/16ths" 18 7/8ths" - 36" 38 3/16ths" -

Renegade Sport, 5dr SUV 15-+ (EU) 275mm 480mm - 915mm 970mm -

10 13/16ths" 18 7/8ths" - 36" 38 3/16ths" -

Renegade Sport, 5dr SUV 16-+ (NZ) 275mm 480mm - 915mm 970mm -

10 13/16ths" 18 7/8ths" - 36" 38 3/16ths" -

3

Fitting Kit EN

K997W

First Time Installation

●Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

●This kit fits type A, B, C and D.

●These instructions show type A crossbar

fitted. They also apply to type B, C and D.

●Use keys to remove covers.

4

Fitting Kit EN

K997W

Fitment FRONT ONLY

●Use hex screwdriver to reverse adjusting

screw 10 turns.

●Press adjusting screw and pull crossbar

legs out. Refer to the crossbar instructions

for crossbar adjustment method.

●Ensure each end of the crossbar is

adjusted equally.

●Please check the front of this manual for

information relating specifically to your

vehicle.

●Adjust crossbar in or out to suit vehicle.

Refer to the crossbar instructions for

crossbar adjustment.

5

Fitting Kit EN

K997W

●Tighten adjusting screw to 3 Nm (2.2 ft lb)

hand tight.

●Remove plastic clamp block by gripping bar

leg with fingers and push firmly with

thumbs until clamp block drops out behind

leg.

●Select plastic internal block (from fitting kit)

and insert into foot.

6

Fitting Kit EN

K997W

●Remove as shown.

●Mark as shown.

Fitment Front Bar Only

●Use drill bit supplied, to drill holes in

marked positions.

7

Fitting Kit EN

K997W

●Re-install rubber ditch mould back into roof

channel and click into place.

●Select grubscrews and screw into the

vehicle's fixed points.

●Do not over tighten.

●Repeat for all items.

●Refer to the underside of the pad for the

part number.

8

Fitting Kit EN

K997W

●It is important to put the pads in the correct

position on the vehicle.

●Letters refer to the pad part numbers and

position.

●Pad Part Number:

A = 224

B = 225

●Place crossbars on pads ensuring the pads

fit into the holes underneath the foot and

the grubscrew passes through the hole in

the foot.

●Tighten the plastic knob. The side with the

nut showing should be facing up.

9

Fitting Kit EN

K997W

●Ensure the plastic knob is in the position

shown when fully tightened.

●Repeat at other end.

●Check crossbar is securely attached to the

vehicle.

●Use keys to fit and lock covers

●If crossbars are removed, please install the

rubber plugs into the ditch moulding.

10