Whispbar K683W User manual
K683W
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 4 x 8 x 2
x 2 x 4 x 4 x 4
x 4
Revision No: 3C 1
Fitting Kit K683W
MAX kgs (lbs)
W/P WHD
Mitsubishi
Outlander GX3, 5dr SUV 13-15 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander GX4, 5dr SUV 13-15 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander GX5, 5dr SUV 13-15 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander MKIII, 5dr SUV 13-15 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 13-15 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 14-15 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 15-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 15-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 15-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 15-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 15-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV 16-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Outlander, 5dr SUV Nov 12-15 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Pajero Sport, 5dr SUV Dec 15-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Pajero Sport, 5dr SUV Oct 15-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit K683W
X
A B C 1 2 3
Outlander GX3, 5dr SUV 13-15 (CN) - 750mm - 914mm 860mm -
- 29 1/2ths" - 36" 33 7/8ths" -
Outlander GX4, 5dr SUV 13-15 (CN) - 750mm - 914mm 860mm -
- 29 1/2ths" - 36" 33 7/8ths" -
Outlander GX5, 5dr SUV 13-15 (CN) - 750mm - 914mm 860mm -
- 29 1/2ths" - 36" 33 7/8ths" -
Outlander MKIII, 5dr SUV 13-15 (EU) - 750mm - 914mm 860mm -
- 29 1/2ths" - 36" 33 7/8ths" -
Outlander, 5dr SUV 13-15 (AU) - 750mm - 914mm 860mm -
- 29 1/2ths" - 36" 33 7/8ths" -
Outlander, 5dr SUV 14-15 (US) - 750mm - 914mm 860mm -
- 29 1/2ths" - 36" 33 7/8ths" -
Outlander, 5dr SUV 15-+ (AU) - 750mm - 903mm 853mm -
- 29 1/2ths" - 35 9/16ths" 33 9/16ths" -
Outlander, 5dr SUV 15-+ (CN) - 750mm - 903mm 853mm -
- 29 1/2ths" - 35 9/16ths" 33 9/16ths" -
Outlander, 5dr SUV 15-+ (EU) - 750mm - 903mm 853mm -
- 29 1/2ths" - 35 9/16ths" 33 9/16ths" -
Outlander, 5dr SUV 15-+ (NZ) - 750mm - 903mm 853mm -
- 29 1/2ths" - 35 9/16ths" 33 9/16ths" -
Outlander, 5dr SUV 15-+ (ZA) - 750mm - 903mm 853mm -
- 29 1/2ths" - 35 9/16ths" 33 9/16ths" -
Outlander, 5dr SUV 16-+ (US) - 750mm - 903mm 853mm -
- 29 1/2ths" - 35 9/16ths" 33 9/16ths" -
Outlander, 5dr SUV Nov 12-15 (NZ) - 750mm - 914mm 860mm -
- 29 1/2ths" - 36" 33 7/8ths" -
Pajero Sport, 5dr SUV Dec 15-+ (AU) 225mm 955mm - 795mm 765mm -
8 7/8ths" 37 5/8ths" - 31 5/16ths" 30 1/8ths" -
Pajero Sport, 5dr SUV Oct 15-+ (NZ) 225mm 955mm - 795mm 765mm -
8 7/8ths" 37 5/8ths" - 31 5/16ths" 30 1/8ths" -
3
Fitting Kit EN
K683W
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
●Use keys to remove covers.
4
Fitting Kit EN
K683W
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
●Clamps onto flush roof rail. Pins locate on
inside of rail.
●Set bars to length (revert to rear of these
instructions).
5
Fitting Kit EN
K683W
●Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
●Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
●Remove both pins from each leg. Use
tapered end of spanner located inside left
hand cover to assist.
6
Fitting Kit EN
K683W
●Repeat for all legs.
●Detach foot from leg. Store loose parts in a
safe place.
●Assemble foot from kit into leg by pressing
it down.
●Ensure foot interlocks with leg.
●Select four feet assemblies and match the
left and right assemblies to the left and
right roof rack legs.
●Using short capscrew and washer, secure
assembly onto leg (use Hex Screwdriver
supplied with crossbar to assist)
●Do not over tighten.
●Repeat for all legs.
7
Fitting Kit EN
K683W
●Use two M5 x 12 mm self tapping screws to
secure the assembly onto the leg.
●Do not over tighten.
Fitment
●Ensure back edge of foot sits flush with the
back edge of vehicle roof rail.
●Place crossbars approximately above
these holes on roof rails.
●Locate two holes at each position along the
inside of the roof rails.
●Apply protective strip as shown.
Trim if required.
8
Fitting Kit EN
K683W
●Place one hand on the leg and apply
downward pressure.
●Slide clamp through opening in leg.
●Ensure the two pins of the clamp engages
correctly with the holes in the roof rail.
●Thread the coach bolt through the clamp
and the leg.
●Ensure the clamp engages correctly on
inside of roof rail.
●Tighten the plastic knob.
●Ensure the plastic knob is in the position
shown when fully tightened.
●Repeat for all four positions.
●Do not over tighten.
9
Fitting Kit EN
K683W
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Table of contents
Other Whispbar Automobile Accessories manuals
Whispbar
Whispbar K388W User manual
Whispbar
Whispbar WBT21 User manual
Whispbar
Whispbar K050W Operation and installation manual
Whispbar
Whispbar K131W User manual
Whispbar
Whispbar K506W Operation and installation manual
Whispbar
Whispbar WB201 User manual
Whispbar
Whispbar K730W User manual
Whispbar
Whispbar K328 User manual
Whispbar
Whispbar K172W User manual
Whispbar
Whispbar K722W User manual
Whispbar
Whispbar K401W User manual
Whispbar
Whispbar K855W Operation and installation manual
Whispbar
Whispbar K059W User manual
Whispbar
Whispbar K153W User manual
Whispbar
Whispbar K890W User manual
Whispbar
Whispbar K469W User manual
Whispbar
Whispbar K958W User manual
Whispbar
Whispbar K308W User manual
Whispbar
Whispbar K987W User manual
Whispbar
Whispbar K075W User manual
