Whirlpool LB3000XK User manual

Model LB3000XK

Space Saver, 241inch

whirlpool

AUTOMATIC WASHER

Use& Care

Guide

Copy

Your Model and Serial Numbers Here

When YOU need service, or call

with a

ready:

question, have this information

1. Complete Model and Serial Numbers

(from the plate under the lid near the

hinge).

2 Purchase date from sales slip (or date

installed).

Copy this rnformation

spaces. Keep this book in the Loun(

information Center with your laun,

Guide, sales slip and warrantv.

Before using

your Washer

Please read this booklet to be

sure your washer ISInstalled and used

properly It WIII help vou get the best

results ond longest life your washer was

deslgned to give

You are personally responsi-

ble for making sure that Your

washer.. .

Is installed by a quaIlfled Installer

Is properly installed and leveled on a

floor that can support the weight

Is connected to the right kind of outlet,

electric supply, water supply and drain

Is properly electrically grounded

Is used only for jobs normally

expected of home outomotlc washers

Is properly maintained

Is protected from the weather

Is not run by children or anyone

unable to operate It properly

Remove

the Consumer Buy

Guide label It WIII be easier to remove

before the washer ISused

You may want to wipe out the

bask -: with a damp cloth before using

to remove dust from storing or shlpplng

SPECIAL INSTRUCTIONS: See the

laundry Guide for tips on deter-

gents, other laundry aids and

instructions for washing special

items.

See the Installation InstructIons for

complete information

CAUTION: Store laundry deter-

gent and additives in a cool, dry

place where children can’t

reach them.

Contents

Before Using Your Washer

Loading Your Washer

Understanding Your Washer

Cleaning the Lint Filter.

Using Your Washer

Important Detergent Information

For a Soak or Pre Wash

Cycle Operation

REGULARHEAVY

KNIT GENTLE :

For Rinsing Only

For Spinning Only

If You Need Service or Help

1 Before Calling for Servrce

If You Need Service

3. If You Have a Problem

.I0

loading your

Washer --- Understanding

Your Washer

For best washing results and

energy savings, sort the laundry

carefully.

1. Sort the Laundry into loads.

Group the laundry into loads that

can be washed and dried together.

See the Laundry Guide for informa-

tion and samples of typical loads.

Try to mix large and small items for

best movement in the washer.

2. Measure Detergent; Add to

Washer Basket.

See detergent information on page

6 and in Section IV of the Laundry

Guide.

Add dry bleach or water condi-

tioner (not fabric softener) if used.

Follow the package directions

carefully.

3. Dilute liquid Bleach Before Add-

Ing to the Washer Basket.

See the “Laundry Aids” section of

the Laundry Guide for more

information.

4. load the Washer.

Spread the load evenly. [Don’t put

all the towels on one side and a few

wash cloths on the other.) An unbal-

anced load can cause the washer to

shake during spinning.

Load without packing so items can

move freely for best cleaning and

least wrinkling.

5. Add Diluted Fabric Softener Only

to the Deep Rinse Cycle.

. DO NOT ADD FABRIC SOFTENER TO

THE WASH. Fabric softeners can com-

bine with soap or detergent to make

greasy stains on fabrics.

This automatic washer has cycle

jettlngs with different agltatlon and spin

speeds for different fabric types For

example, the REGULAR HEAVY Cycle

70s high agitation and spin speeds;

<NIT GENTLE has low agltatlon and

spin speeds

You can control the wash water

‘emperature and the amount that fills

the washer by moving the control dial

according to instructions on page 4

Sections

this Use & Care Guide

go into detail on the “what and why”

of each setting Read this and the Laun-

l-iry Guide carefully to get the best

,zleaning results.

Cleaning the Lint

Filter

Water runs through the lint filter

whenever the washer agitates. Check it

often to make sure it’s clean

and filter-

Ing at its best

To remove it for cleaning, press

the release and pull straight out. lnstruc-

tions for cleaning are printed on the

bottom of the filter

Using Your Washer

-zYeize

Whirlpool

ZSPEED ZCYCLE

Your automatic washer

IS easy to

use.

To make it even easier, read the

following steps before starting your first

load. Start your washer after you put in

detergent, the loud, and any other

laundry aids according to Information

on page 3.

Select a cycle and start the

washer.

Push the Cycle Control Knob in and

turn it to the right [clockwise]

Stop when the pointer is on the num-

ber of minutes you want in the cycle you

want.

Instructions for which cycles to use for

each fabric type are under the lid.

To start the washer, pull the Cycle

Control Knob out. When the cycle IS

over, the washer WIII stop.

To stop the washer at any time.

during a cycle, push the Control

Knob in.

Pull it out to restart the washer

To change Q setting,

push the Con-

trol Knob in to stop the washer Then

turn the Control Knob to the right (clock-

wise] to the setting you want. Pull the

knob out to start the washer

2. To adjust the wash water

temperature. )

Hot wash

can be selected only in the

REGULAR HEAVY Cycle Push in and

turn the Cycle Control Knob so the

pointer is on from 10 to14 minutes in the

REGULAR HEAVY Cycle Pull the Control

Knob out to start.

Warm wash

can

be selected in the

REGULAR HEAVY Cycle Push in and turn

the Cycle Control Knob so the pointer is

on from 7 to 9 minutes. Pull the Control

Knob out to start

pull start push stop

A warm wash is pre-set in the KNIT

GENTLE Cycle. Push in and turn the Con

trol Knob so the pointer is on from 4 to 6

minutes. Pull the Control Knob out to

start.

All rinses use cold water.

To use less wash water.

When you have only a few items

to wash, you may want to use less water

to help save energy. Setting the washer

to fill with less water also sets it for 0

shorter og/tot/on time.

The washer will fill to its highest level

(about15 3 gallons or 59.9 Mers) when

the Control Knob pornts to a fill area.

To use less water, push the Control

Knob in and turn to the rrght (clockwise]

to a fill area in the cycle you want.

Pull the Control Knob out; the washer

will start to fill.

When there is us much water as you

want in the washer, push the Control

Knob in.

SLOWLY

turn it to the rrght, past

the fill area Pull the Control Knob

out.

You can have as many as 6 minutes

of agitatron, or as few as 2 minutes with

a low water level in the REGULAR HEAVY

Cycle In the KNIT GENTLE Cycle, you

will have about 2 minutes of agitation.

For the rinse, the washer fills to Its

highest level with cold water

4. Load sizes.

For the best cleaning results, the

load should move freely In the water

Watch for rollover. An item [like a sock)

should sink and come up again later.

Important

Detergent

Information

Detergents and soaps clean

by loosening SOII, and by holding it in

the water so it drans away. If not

enough detergent is used, soil and

lint con settle bock on the items In

the load.

SOAP

works best in soft water

(O-4 groins hardness). In horder water,

both the wash and rinse water should

be softened. Use enough soap to

make about

IV2

to 2 inches (3.8 to 5 5

cm] of suds.

DETERGENT

works in hard or

soft water. Package directions ore

u~uallv based on soft water and

washers with normal-size tubs.

Use

more detergent...

1 for hard water.

2. for heavy greasy or

01ly soils

3. If the detergent

low

phosphate

4 for cold-water washes.

DETERGENT SUDS.

There ore

high, normal and low sudsing pow-

dered detergents. If the recom-

mended amount of detergent makes

too much suds, switch to a lower

sudsing brand.

DO NOT REDUCE THE

AMOUNT

of detergent.

Use the following chart as

beginning suggestions for powdered

and liquid detergent amounts. See

your Laundry

Guide

for more infor-

mation (pages 14-22).

WATER HARDNESS IN GRAINS

O-4 Grains 4-10 Grains IO-20 Grains

Powdered Detergents

Low Suds 314cup (175 ml] 1’4 cups [250-300 I'h-1'12 cups

mL1 (300-350 mL]

Normal Suds II’4 cups (300 ml] 1% cups (425 mL) 2-2’14 cups

(475525 ml]

High Suds l-I”4 cups 2 cups (475 ml] 21/zcups (600 ml]

(300-350 ml]

No phosphate -Follow package recommendations -

Liquid Detergents l/qto 1cup (60 to 250 ml], depending on the brand and

amount of soil. Follow package recommendations.

+:These recommendations do not apply...

In areos where phosphates ore banned.

In areas with laws limiting (by weight or percentage) the amount

of detergent used in Q wash load.

For a Soak

or Pre Wash

SOAK

Add detergent or pre-soak product

to washer basket.

Always dissolve

Some stains, heavy so11or other

laundry problems ore best removed

enzyme pre-soak and detergent

powders to help prevent spot fading

on colored items.

with Q soak or Q double wash you con . Add load.

work the Cycle Control Knob for these

added cleaning operations.

Push Cycle Control Knob in and turn

right (clockwise) to a fill area In the

REGULAR HEAVY Cycle.

FILL HOT v

The washer fills on/y when the Control

Knob pomts to one of these f/ii area

For a lower water level, see page 5.

Warm water is suggested for most

soaking

After the washer fills, push in the Con-

trol Knob.SLOWLY turn the Control Knob

to the 2-minute setting, pull it out.

Let the washer agitate for about one

minute, then push the Control Knob In to

stop the washer

Soak for the time needed.

NEVER

SOAK FOR MORE THAN TWO HOURS.

Follow package recommendations on

the pre-soak product.

Pull the Control Knob out to let the

washer finish agitating

After the washer drains and spins. but

before it refills for the rinse, push the

Control Knob in to stop the washer

Add detergent for the wash

Always

dissolve powdered detergent in a

quart of warm water before adding

to a wet load.

(Or use undiluted liquid

detergent )

Turn the Control Knob to the right

(clockwise) to the cycle and number of

minutes you want

Pull the Control Knob out to start the

washer

Use chlorine bleach only in a full

wash cycle, not in a soak.

PRE WASH

Add detergent to the washer basket.

Add load

Push Cycle Control Knob in and turn

right (clockwlse) to the FILL WARM or

FILL HOT area in the REGULAR HEAVY

Zycle.

Use warm water for stained fabrics.

?Ise hot for heavily soiled or greasy

loads

Pull the Control Knob out to start the

dasher filling.

When the washer has filled to the

level you want, push in the Control Knob.

SLOWLY

turn the Control Knob right

(clockwlse) to the wash time needed for

the load [usually 4 to 6 minutes). Pull it

3ut to start b

1. FILL WARM OR HOT

2. 2 TO 6 MINUTES

AGITATION

After the washer agitates, drains and

spins, push the Control Knob in to stop

the washer before it refills for the rinse

Add detergent for the second wash.

Always dissolve powdered deter-

gent in a quart of warm water

before adding to a wet load.

[Or use

undiluted liquid detergent.)

Turn the Control Knob to the right

(clockwlse) to the cycle and number of

minutes you want

Pull the Control Knob out to start the

washer

Use chlorine bleach only in a full

wash cycle, not in a pre wash.

Cycle

Operation

ber of minutes you want the washer to

agrtate before it drains and fills for the

rinse You WIII want to use the longer

agitation times for more heavily soiled

Your washer has two cycles The loads

numbers In each cycle are for the num- You can adjust the wash water

WHAT HAPPENS IN EACH CYCLE:

l PUSWlN

KNOB, TlJRN TQ

CYCLE AND

TIME

* Pill1 OUT

TO START

REGULAR/HEAVY CYCLE

Use for sturdy white and colorfast cot-

tons, and for heavy work clothes. High

agrtatron and spin speeds help get the

best cleaning results

KNIT /GENTLE CYCLE

Use for delicate items and washable

synthetic knits such as polyester, nylon,

acrylic Wash nylon hose or panty hose

in a net laundry bag

For Rinsing Only

Your washer can be set to rinse

only. Use the setting for an extra rinse, or

for laundry that only needs a rinse and

spin There

an asterisk( ) just after

the numbers In both cycles. If you push

in on the Cycle Control Knob, turn the

pointer to one of those asterisks and pull

the Control Knob out, the washer

WI/I

fill. agitate. drain and spin.

For high agitation and spin

speeds, use the asterisk In the

REGULAR HEAVY Cycle The KNIT

GENTLE Cycle has low agrtation and

sbrn soeeds

The washer fills with cold water.

Water level and temperature can’t

be adjusted in this setting I

temperature in the REGULAR HEAVY

Cycle. You can also work the Cycle

Control Knob to use less water when

washing small loads. [See page 5.)

if you turn to a cycie ond start the

washer but change your mnind push in

on the Cycle Controi Knob and turn

to the right [c/o&wise) to the settmg you

wont Then puii out to start

For Spinning Only

ing the bar just before OFF In any cycle.

The washer will drain, spin out

There may be times when you

want to drain out all the wash water and

start over. To stop the washer at any

time, just push In on the Cycle Control

Knob To set the washer so it drains and

spans water out of the load. push In on

the Control Knob, turn the dral to the

right (clockwrse) so the pointer IStouch-

water and stop.

If You Need

Service or Help,

We suggest You

Follow These Three

Steps:

1. Before calling for service,

Problems are sometimes caused

by little things you can correct without

tools Check this lrst before you call for

service:

IF YOUR WASHER DOES NOT FILL:

Is a fuse blown or crrcurt-breaker

trapped?

Are the water supply hoses kinked?

Is the Cycle Control Knob set and

pulled out?

IF YOUR WASHER DOES NOT SPIN:

Is the Ird closed?

Is the power supply cord plugged In?

Is a fuse blown or crrcurt-breaker

tripped?

IF WASHER FILLS AND DRAINS WITHOUT

RUNNING:

Make sure that the Cycle Control

Knob ISpointing to a number in the

cycle.

MAKE SURE THE DRAIN HOSE IS HIGHER

THAN THE WATER LEVEL IN THE WASHER.

IF IT ISN’T...

The washer may seem to be draining

durrng wash and rinse cycles.

Water can siphon out. [See Installation

Instructions.)

Is the power supply cord plugged in?

Are both water faucets open7

Table of contents

Other Whirlpool Washer manuals

Whirlpool

Whirlpool XVP9000TA Parts list manual

Whirlpool

Whirlpool Design 2000 User manual

Whirlpool

Whirlpool LSR5121JQ0 User manual

Whirlpool

Whirlpool 3950319 User manual

Whirlpool

Whirlpool CFCR80221 User manual

Whirlpool

Whirlpool LSV8244BW0 User manual

Whirlpool

Whirlpool WFW9750W Series Owner's manual

Whirlpool

Whirlpool 8TWFW5620HW User manual

Whirlpool

Whirlpool HWMB9002GW Installation guide

Whirlpool

Whirlpool AWG812/PRO Installation guide

Whirlpool

Whirlpool AWO D5306 User manual

Whirlpool

Whirlpool WFW94HEXL Assembly instructions

Whirlpool

Whirlpool WRSB 7259 D EU User manual

Whirlpool

Whirlpool 3LA5800XK User manual

Whirlpool

Whirlpool GCAM2792LQ0 User manual

Whirlpool

Whirlpool LA5430XP User manual

Whirlpool

Whirlpool LHW0050PQ Assembly instructions

Whirlpool

Whirlpool 3360620 User manual

Whirlpool

Whirlpool W10038080 User manual

Whirlpool

Whirlpool Gold GSW9545JQ0 User manual

Whirlpool

Whirlpool LSP880GP User manual

Whirlpool

Whirlpool WTW57ESVW0 User manual

Whirlpool

Whirlpool LA6055XS User manual

Whirlpool

Whirlpool AWO46075 User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Beko

Beko WKB 51231 PTMA manual